Best Pump Grease Guns in 2026

LOCKS ON, DOES NOT LEAK: Grease goes in, not on the machine. LockNLube’s unique sliding sleeve ensures that when the jaws are locked onto the Zerk, a leak-proof seal is created.

ONLY REBUILDABLE COUPLER: All LockNLube couplers include a rebuild kit! Simply replace the seal and jaws and it is as good as new = lowest lifetime cost.

COMPATIBLE WITH ALL GREASE GUNS AND ZERK FITTINGS: 1/8" NPT works with all grease guns and manufacturers – pneumatic, manual, or electric. Locks on to all Metric and SAE specification Zerks.

DEWALT grease gun can power through clogged grease fittings with a motor that delivers up to 10,000 max PSI

High-volume pump of the battery grease gun pushes up to 5.0 oz/min high-flow applications.

DEWALT 20V grease gun kit can control grease flow with the variable speed trigger

Industry leading 10,000 PSI max operating pressure

48" flexible hose offers greater access to difficult to reach fittings

Air bleeder valve for quick priming

Fully automatic with continuous operation and grease flow.Fit Type: Universal Fit

Variable-speed trigger provides excellent grease flow control

30 inch high-pressure hose with coupler and attachment clip

Develop over 10,000 PSI without batteries

Patented pressure return valve easily clears pressure from the hose and returns it to the canister with no mess.

Includes the LockNLube Grease Coupler, 10 ft. hose, and the G.Scoop to easily and cleanly refill with bulk grease

Anti-Mess Grease Pump: Single-hand held grease gun with zinc-plated steel barrel provides a more clean and efficient way of greasing

Kit Includes: A one-hand pistol grip grease gun, 500mm high-pressure nylon hose, 10 AirTec G200 multipurpose grease tubes, and 4-jaw hydraulic coupler

High Pressure Capability: Grease gun pistol ensures function under pressures as high as 300 bar (4,350 PSI) and multiple braid burst pressure of 1,000 bar (14,450 PSI)

10,000 PSI and 7.5 oz./minute flow rate for maximum efficiency

Steel grease tube for maximum durability

On-board LED work light helps to illuminate workspace

Mini grease gun with needle nozzle

Easily lubricates air tools and other flush type mini grease type fittings

Pack bottom side with grease, then re-install base cap and push up against the inside plate with a screwdriver or other tool to feed grease up to nozzle and pressurize

Comes With 18" Flex Hose Extension For Hard-To-Reach Fittings.Fit Type: Universal Fit

Convenience Of One-Hand Operation For Easy Greasing

Heavy-Duty, Lucas Tm, Cast-Alloy Head With Heavier And Reinforced Wall Thickness For Extra Strength

The rugged PowerLuber's new three-point base keeps the tool upright and stable for easy handling without being bulky to allow easy access to fittings in tight spaces

The tool has a convenient, built-in LED to illuminate the work area

Multi-function LCD Display shows grease output and battery charge, and alerts the operator of blocked fittings and loss of prime

Pistol grip grease gun with 27” flex hose, is highly recognized in lubrication equipment market, the choice of millions of grease gun users around the world. Use wit 1/8'' NPT Standard grease coupler.

Chrome plated canister, a feature of high quality grease gun, 5 times anti-corrosion, easy to clean and not easy to scratch, super durable.

Leakage-free design, canister is built with high precision cold drawn steel tube, avoids the leakage issue caused by canister deformity. Patented pump head high pressure plunger O-ring eliminates the internal leakages.

🚜【UPGRADED GREASE GUN】7000psi Max working pressure guaranteed by iron die cast head and enhanced sealing.

🚜【Ergonomic Design】Pistol grip lets you operate with one hand. Rubber sleeve increases friction for safety, yellow paint is easy to clean and find.

🚜【Locking Grease Gun Coupler】Offers Push-Lock-Lubricate smooth experience. 1 locking grease gun coupler, 1 flex hose included, eliminate grease gun fitting locking frustration.

Shop-grade tool for clean and precise application of grease and anti-seize

Small tip opening for precise placement in any application

Includes 3.6 fl. oz (100mL) canister

Bravex pistol grip grease gun, is highly recognized in lubrication equipment market, the choice of millions of grease gun users around the world.

Chrome plated canister, a feature of high quality grease gun, 5 times anti-corrosion, easy to clean and not easy to scratch, super durable.

3-way fill design, the plunger is designed to work for both bulk grease and cartridge. Anti-aging fluorescent rubber O-ring and plunger, will not lost softness for sealing after long time storage.

INCLUDES: 1 Grease Gun (7,000 PSI), 1 Coupler, and an 18" flexible hose extension.

ADJUSTABLE STROKE HANDLE: Allows use for high pressure/flow and high volume air applications and large projects.

MAX PSI: Maximum air pressure of 7,000 pounds per square inch.

POWER & PERFORMANCE: Precision, Tight-Tolerance Die Cast Head Develops Up To 7500 PSI Working Pressure and Primes Easily

DURABILITY: Lightweight, Rust Free Anodized Aluminum Barrel

VERSATILITY: 18 inch Heavy Duty Reinforced Flex Hose with Spring Guard, 6 inch Straight Tube, 6 inch Angled Tube, Needle Nozzle and Heavy Duty Coupler Make Quick Work of Any Lube Job

APPLICATION: Used for injecting and removing transmission oil, gear oil, and other automotive fluids.

RIBBED NOZZLE: Creates a tight seal from the hose to the gun for maximum suction.

TRANSPARENT BODY: Increased visibility of fluids during transfer.

Canister is built with cold drawn steel tube provide the high durability, the low variance ID feature prevent grease leakage from happening in bulk application.

O-Ring sealed high pressure piston design, prevent the grease from leaking from pump head.

Non-slip rubber grip provides higher griping friction.

Combines Finish Line grease injection gun and a 3. 5 oz tube of our Premium grease into one convenient package

The grease gun is compatible with all standard tubes of grease, and can be operated easily with one hand

Premium grease has been the choice of professional MTB and Grand tour teams for over 20 years

Pneumatic grease gun. Air Bleeder Valve Quickly Eliminates Air Pockets.

With 18 inch Heavy Duty Reinforced Flex Hose, 3 way loading,5-1/2 hard metal extension tube. And the sharp type nozzle.

O-Ring sealing high pressure piston design, prevent the grease from leaking from pump head

👨‍🌾Reinforced spring pushes all air and grease to the top. High pressure resistant O-ring ensures no grease leakage and maximum working pressure up to 7000 PSI. Special iron die-cast head and air release valve make it easy to load and exhaust trapped air. Attention! Be sure to exhaust the air when using it for the first time!

👨‍🌾Cold-drawn steel canister combined with non-slip rubber sleeve and T-handle can easily realize four loading methods: cartridge loading, bulk loading, suction loading and filling pump loading. Attention! Do not unscrew the bottom of the grease gun to prevent injury! Always pull back the T-handle after lubrication to prevent wasting grease!

👨‍🌾Equipped with 10,000 PSI flexible shaft to make lubrication safer and smoother. The 18inch length makes it more flexible to operate. Extended elbows and straights can grip most hard-to-reach grease zerk fittings. Attention! Tighten with a wrench when installing the flexible shaft and extension tube.

Power Performance: This Heavy Duty Grease Gun is the Premium grease gun in the market. The canister is built with a cold drawn steel tube providing high durability. 8000 PSI working pressure guaranteed by the iron die-cast head and enhanced sealing.

Upgraded Grease Gun: Strengthen O-Ring sealed high-pressure piston design prevents grease leakage from occurring in the bulk application; Redesigned air bleed valve, releases air pockets with a single push of a button; Standard 14 oz or 400cc bulk Cartridge can be used.

Comfortable to Use: The strong pistol grip handle creates plenty of leverage for all-day comfort, easy operation, save effort. The texture of the grease gun increases friction for safety. Yellow paint is easy to clean and find.

⭐【6000 PSI WORKING PRESSURE】- Heavy Duty Lever Handle for Ease of Use. Professional,Heavy-duty,casted head,develops up to 6,000 psi working pressure and burst pressure 10,000 psi.

⭐【2-WAY LOADING】- Uses a standard 14 oz. cartridge and bulk suction fill.Equipped with a 7 inch Rigid Extension and 12 inch reinforced Flex Hose.Interchange Between Flex Hose & Rigid Extension.

⭐【NON-SLIP DESIGN】- Non-Slip Knurling for Working Ease also Makes Cartridge Changes Fast,Quick and Easy. Ergonomically designed T-Handle for Sure Grip & Easy Filling,providing a positive draw.

Various Accessories: The grease gun set comes with a full range of accessories, including one 18-inch flexible hose, 2 fixed tubes, 1 special nozzle, and 2 reinforced nozzles. They can meet most needs of lubricating.

Four Loading Methods: You can choose the most suitable one from the four loading methods, including cartridge loading, direct bulk loading, suction loading, and filler pump loading.

Considerate Details: Non-drip protective cap, non-slip rubber grip, and ergonomic T-handle are convenient for using and storing.

Continuous cycle provides easier operation for user, Non-slip rubber grip provides higher griping friction,working pressure is up to 6000 psi.

18 inch Heavy Duty Reinforced Flex Hose with Spring Guard with coupler, 5-1/2 Hard Metal Extension Tube. And the sharp type nozzle.

O-Ring sealing high pressure piston design, prevent the grease from leaking from pump head.Air Bleeder Valve Quickly Eliminates Air Pockets.

Continuous cycle provides easier operation for user. 3-Way Grease Loading：Standard 14 oz. Cartridge；Bulk Suction Fill；Filler / Dispenser Pump

Canister is built with cold drawn steel tube provide the high durability, the low variance ID feature prevent grease leakage from happening in bulk application.

O-Ring sealing high pressure piston design, prevent the grease from leaking from pump head.

Simple, easy to use, plunger type grease gun. Screws on to 8-ounce lubricant tubes.

For use on Quicksilver and Mercury-8 ounce lubricant tubes.

Keep on board your boat for periodic maintenance needs.

INSTALLATION TIPS - Plunger rod length is 6" / 15.5 cm, only rod is pulled up to the end, can it be locked. After inserting cartridge grease into the barrel, tighten grease gun head counterclockwise, and then press the tab to retract plunger rod.

VARIOUS COLLOCATION - The set comes with a 12'' flexible hose, a 5'' rigid pipe and a 3'' rigid pipe which can be used for different collocation to meet your different needs.

LEAK-PROOF DESIGN - Compared with other grease guns,our product is equipped with thicker thread design to prevent leakage. And the unique knurling on barrel is specially designed for enhanced non-slip grip.

【THE CHEAPEST ELECTRIC GREASE GUN】: Electric grease guns are expensive? No, now we are here, just use the tools in your hands and add our grease guns, a new high-quality grease gun kit battery powered is produced, and your work will be completed more quickly. This is the king of cost performance compared with manual grease gun.

【PROFESSIONAL COUPLER & HIGH VERSATILITY 】2nd Gen pneumatic grease gun coupler upgraded to industry-leading 12,000 PSI, compatible with all grease guns 1/8" NPT grease gun fittings. No need to carry specific tools, your pneumatic tool, electric drills, or impact drivers can become your greese gun with grease. The smooth retraction mechanism allows one-hand operation.

【VARIOUS ACCESSORIES & EASY INSTALLATION】: The set comes with a 12'' grease gun hose, a 6'' rigid pipe, a converter and 2 types of connected heads which can be used for different collocation to meet your different needs. 1/4" hex drive with an adjustable bracket to fit nearly all cordless, corded and air drivers.

Pneumatic Grease Pump: Capacity: 20 liters (5 gals); Output Pressure: 30-40 MPA. Pressure Ratio: 50:1. Oil Volume: 0.75 L/Min. The pneumatic grease pump has a high working pressure that is capable of injecting oil into your vehicle quickly, perfect for the lubrication and maintenance of various vehicles.

5 Gallon Capacity Storage: Made of chromium-vanadium steel and cast iron, the grease pump features high hardness and sturdiness. The 5-gallon large capacity allows you to put your oil drum directly into the machine without having to pour oil multiple times. The large quantity of oil it can hold will efficiently cut time in half, while also saving your energy.

360° Universal Grease Gun: The gun head in the grease pump can rotate arbitrarily in multiple directions, meeting different positional needs without restrictions.The thickened suction cup can fit the barrel body without air intake and prevents oil leakage. Additionally, it provides a strong sealing performance, making it easier to discharge oil.