Best Decotacks in 2026

100 Pcs/Pack, Head Diameter [7/16 in] *** Full Length top the bottom [5/8 in] *** Shank Length under the cap to bottom [1/2 in]

Upholstery Tacks, Made by full automatic German machines with HQ Steel and Double layer electroplated

Strong and heavy weight items for upholstery industry

Apolstery Nails 500 Pcs/Box, Head Diameter [7/16 in] *** Full Length top the bottom [5/8 in] *** Shank Length under the cap to bottom [1/2 in]

Upholstery Tacks Made by full automatic German machines with high quality steel and double layer electroplated Antique Brass (French Natural) finish

Strong and heavy weight items for upholstery industry, with proper tools you will not need any prefix hole. Please don't compare this items with filmsy cheap DIY nailheads.

500 Pcs/Box, Head Diameter [7/16 in] *** Full Length top the bottom [5/8 in] *** Shank Length under the cap to bottom [1/2 in]

Upholstery applications requieres proper installing tools like tack hammer & Need nose pliers to drive nails.. Without this tools may cause jumping nails and usually bending shaft! So if you are not very experienced upholster, Please use the tools to install nailheads

Strong and heavy weight items for upholstery industry, with proper tools you will not need any prefix hole. Please don't compare this items with flimsy cheap DIY nail heads.

100 Pcs/Pack, Head Diameter [7/16 in] *** Full Length top the bottom [5/8 in] *** Shank Length under the cap to bottom [1/2 in]

Made by full automatic German machines with high quality steel and double layer electroplated Antique Brass (French Natural) finish

Strong and heavy weight items for upholstery industry, with proper tools you will not need any prefix hole. Please don't compare this items with filmsy cheap DIY nailheads.

It's about a Penny Size, Head Dia (D) : 3/4in (18mm) --- Cap Height (H) : 0.16in (4mm) --- Shank Length (L) :3/4in (18mm) --- Shank Dia (T) :0.08in (1.8mm)

Made by Steel with double layer Antique Copper Electroplated finish

Need to use Needle Nose Pliers and Tack hammers to install them.. without this tools the shank may get bent..

Head Size : 7/16in (11mm) *** Shank Length : 5/8in (17mm) *** Equal to 500 Nail Heads

THIS ITEM REQUIRES TOOLS TO INSTALL (NEEDLE NOSE PLIERS & TACK HAMMER), Without these tools nails may get bent.. Even professionals are using this tools to install upholstery nails..

Made by Steel with high grade double layer Nickel Electroplating... Due to they are plating in same pools, the single nail and strips color is very similar.. They don't have color matching problems like long strips..

1 peace of Interchangeable head Soft Face hammer and 1 peace of Pliers

Using together with decotacks Upholstery Nails & Tacks

Soft Face hammer doesn't make any scratches on nails surfaces

The functionality of the pliers allows you to easily remove nails from the front or back ot the wood.

Unlimited flexibility allows user to easily extract nails regardless of size or if head of nail is damaged or removed

The durability of forged steel head and handles create a durable tool with rubber grips for comfort and control

FORGED IN ONE PIECE – The most durable, longest lasting striking tools available

HIGH LEVERAGE DESIGN – Rounded head for added torque & increased leverage

REMOVES HEADLESS NAILS – Claw designed allow for headless nail removal with minimal wood damage

20% thicker, steel construction for maximum prying power

Curved rocker end for sniper control

Precision-honed, beveled ends for easier penetration

FORGED IN ONE PIECE – The most durable, longest lasting striking tools available

HIGH LEVERAGE DESIGN – Rounded head for added torque & increased leverage

REMOVES HEADLESS NAILS – Claw designed allow for headless nail removal with minimal wood damage

Air Inlet: 1/4 inch NPT Thread

Operating Pressure: 80-120 PSI

Driver Diameter: 0.16 inch

FORGED IN ONE PIECE – The most durable, longest lasting striking tools available

HIGH LEVERAGE DESIGN – Reinforced rocking head for maximum leverage

BUILT FOR THE PRO – Carpenters, wood workers, demolition crews, framers, roofers, tradesmen & serious DIYers. Perfect for window & door trim, molding and baseboard

➤Premium Quality: Made of quality 40 CR material, each consists of two pieces of turned, hardened steel joined by a tightly coiled spring, will not easily break or deform. Anti-slip design comfortably delivers 3500PSI of striking impact force, making it a must-have for any carpenter or finisher

➤Double Ended: This set includes two dual head nail setter with head sizes of 3/32-inch and 1/8-inch

➤Common Applications: This dual head nail setter is designed to quickly and efficiently counter sink finish nails into wood surfaces. The dual-head design of this setter features the most popular sizes for trim and finish jobs, with a 1/8-inch head for larger nails and a 3/32-inch head for smaller pin nails

DEWALT PLRS 10IN MF END NIPPER

COMMERCIAL CROWBAR: Replace old and worn-out composition roofing shingles in no time with our practical pry tool. Our roof snake makes removing and applying new shingles more accurate, efficient, and safer than traditional replacement methods.

ROOFING TOOLS AND EQUIPMENT: Never damage your roof again with this convenient pocket pry bar. Install new 3-tab shingles without bending or hitting surrounding shingles or accidentally striking your fingers with your hammer in the process.

HAND TOOLS: A must-have for all roofers, this tool is forged from high-strength steel and has a patented offset nail slot feature allowing you to align nails with the correct one-inch offset from the bottom edge of your current course.

7" End cutter Plier

This product is highly durable

100% Made in the USA

7” End Cutting Plier, Nail Puller

Made From High Carbon Steel For Long Lasting Performance And Preventing Rust

Soft Plastic Coated Grip

100 Pcs/Pack, Head Diameter [7/16 in] *** Full Length top the bottom [5/8 in] *** Shank Length under the cap to bottom [1/2 in]

Upholstery Tacks, Made by full automatic German machines with HQ Steel and Double layer electroplated

Strong and heavy weight items for upholstery industry

Made of good quality products

Select propellants that deliver consistent accuracy and performance

Product is manufactured in Taiwan

Forged alloy box-joint and Hardened, tempered jaw

Available in short or long jaw designs

Black enamel finish offers extra durability

Punch nails out of hard woods and ideal for recycling wooden pallet or case

Removable Nails Range: 10-20 gauge

Powerful and durable for continuous use; comfortable rubber grip for fatigueless operation

Sharp beveled edge for scraping paint, caulk, or putty in tight spaces

90 degree strike surface end with sharp edge for siding nail removal or prying between finish work

One onboard nail puller and two siding nail pullers easily hook and remove with the tap of a hammer

Up to 20% lighter, carbon-steel design for sniper control

Dual strike zones for rapid nail extraction

Precision-honed claws remove embedded or headless nails with minimal damage

FORGED IN ONE PIECE – The most durable, longest lasting prying tool available are crafted from a single piece of solid steel and honed into the optimal design for use.

HIGH LEVERAGE DESIGN - Engineered to produce maximum torque when pulling nails & prying boards.

REMOVES HEADLESS NAILS – The design of this cats paw nail puller allows for headless nail removal with minimal wood damage.

Include: 8" Nail puller and chisel scraper, 12” Nail Puller

Made of drop forged and heat-treated alloy steel for strength and durability

Corrosion-resistant black nickel plated finish

MADE WITH: We are serious with our quality when it comes to our tools. Gunpla Heavy-Duty End-Nipper Cutting Pliers is made with premium high-carbon, drop-forged, polished steel for durability and an electronic coating to help prevent rusting. The high leverage vinyl-dipped handles provide exceptional leverage and have a comfort-grip coating for firm command and control. It is sharp and safe.

APPLY ON: Gunpla Heavy-Duty End-Nipper Cutting Pliers has perfectly mated cutters with anvil and knife style edges designed for flush cutting steel wire(up to 1.2mm), spokes and other metals. Jaw clearance exceeds 24mm on this heavy-duty tool, which is precision-made with high-carbon steel for superb performance and lasting durability.

ONE OF KIND DESIGN: Gunpla Heavy-Duty End-Nipper Cutting Pliers has an 24mm jaw clearance to grip large objects. Uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting-edge life.

【Ideal for Removing】The trim puller is specifically designed for safe removal of tiles, baseboards, hardwood floors, window trim,molding, door casings, trim panels, and even nailed or glued countertops, without using shims or board spacers.

【Easy To Use】First remove or separate the caulk that seals the top of the baseboard by cutting it with a sharp knife, then insert the puller above the baseboard and tap it with a hammer or mallet; it will slide right behind the baseboard. Gently pull on the tool and the baseboard will pop out of the wall.

【Durable Material】 Made of high quality carbon structural heat-treated steel, it is a very sturdy tool that can withstand repeated whacks and can be used over and over again. The comfortable silicone material can help you hold the handle easily and protect your hand from injury.

Nail extractor

Saw wrench

Nail pick

FORGED IN ONE PIECE – The most durable, longest lasting prying tool available are crafted from a single piece of solid steel and honed into the optimal design for use.

LIGHTWEIGHT & DURABLE - Rounded build reduces weight & increases strength to make both carry and use simple and easy.

HIGH LEVERAGE DESIGN - Engineered to produce maximum torque when pulling nails & prying boards.