Best Derxiero in 2026

5 Pieces welding mesh

15*20 cm / 5.9*7.9 inch

Made from Stainless Steel

Heavy duty 8 AWG (American wire gauge) x 3C all-copper wires with 6-50 NEMA plug and connector designed for use on all portable welders

Delivers 40 amps at 250 volts

Lighted molded 50 amp plug and connector for added safety

205 Max Amps (up to 50 feet), Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F)

TEMCo Easy-Flex has a rugged EPDM jacket and is highly flexible. Annealed 30 gauge bare copper conductor.

Nominal OD: 0.413", Conductor stranding: 624/31

Made of strong, mild steel

Excellent weld and bead appearance

Freezing characteristics accommodates poor fit up

ED030584, MIG Welding Wire, NR-211-MP.035, Spool - 2 PACK

Water Resistant

Highly flexible 30 gauge copper stranding

Ships as a coil

Sunlight Resistant

Water Resistant

Highly flexible 30 gauge copper stranding

SAFE THERMAL PROTECTION: The Fiberglass Fire Blanket Retardant , 6’ x 4’ Foot is a 100-percent flame retardant welding blanket that prevents accidents, injuries, and property damage that can be caused from sparks, flares, and splatter

VARIOUS APPLICATIONS: Protect your furniture, flooring, wood railings, and yourself from sparks, embers, molten metal, and heat that comes from welders, grills, smokers, and more; We do not recommend cutting this blanket into smaller sections – Simply fold to accommodate smaller applications

BUILT TO LAST: Constructed from 19.8 oz/yd² fiberglass with up to 1,000-degrees Fahrenheit (537°C) working temperature for maximum thermal protection in any light to heavy duty general welding applications

Country Of Origin: United States

Package Weight: 10.599 Pounds

Package Height: 6.35 Centimeters

Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld

Shielding gas is not required, All positions, Single and multi pass welding

Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance

🐓 SIZE & LENGTH - 16 Gauge Black Vinyl Coated Welded Wire, 1-Inch x 1-Inch Opening Mesh, 3 ft. / 36-Inch in Height, 50 ft. / 600-Inch in Length, suitable for home and garden purposes, including property dividers and protective covers, which you can adjust to your specific needs.

🐓 STURDY CONSTRUCTION - Made of 16 gauge heavy duty galvanized wire, providing a double coating for maximum rust resistance and long life, vinyl coated for extra protection, the vinyl coated welded wire mesh would be a good choice for everyone

🐓 1-INCH OPENING SQUARE MESH WEAVE - With 1-Inch mesh, the welded wire is flexible and tight enough to leave out large ground crawling arachnids, and also can effectively keep small critters out to protect your garden or farmed animals

🐓 SIZE & LENGTH - 16 Gauge Black Vinyl Coated Welded Wire, 1-Inch x 1-Inch Opening Mesh, 5 ft. / 60-Inch in Height, 50 ft. / 600-Inch in Length, suitable for home and garden purposes, including property dividers and protective covers, which you can adjust to your specific needs.

🐓 STURDY CONSTRUCTION - Made of 16 gauge heavy duty galvanized wire, providing a double coating for maximum rust resistance and long life, vinyl coated for extra protection, the vinyl coated welded wire mesh would be a good choice for everyone

🐓 1-INCH OPENING SQUARE MESH WEAVE - With 1-Inch mesh, the welded wire is flexible and tight enough to leave out large ground crawling arachnids, and also can effectively keep small critters out to protect your garden or farmed animals

Premium quality ER308L stainless steel MIG welding wire 2-Lb spool.

Conformed to AWS A5.9/ASME SFA A5.9/ER308L. 2-lb net weight of ER308L stainless steel welding wire. 4" spool wrapped in moisture-resistant plastic film. Typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

For MIG welding (GMAW) stainless steel 304, 304L, 308, 308L, 321 and 347, etc. With a carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation. Most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures. Shielding gas required, usually Argon/CO2 mix.

Country Of Origin: China

Model Number: 42286

Item Package Dimension: 2.5" L x 8.25" W x 8.25" H

Lincoln ED030584 .035", NR-211, LB Spool, Inner Shield Flux-Core Welding Wire

Mild Steel, All Position, Designed For Mig Wire Feed Welders

Delivers Clean Welds With Excellent Bead Appearance

# Sturdy construction; Made of 16 gauge heavy duty galvanized wire, providing a double coating for maximum rust resistance and long life, vinyl coated for extra protection, the vinyl coated welded wire would be a good choice for everyone

# 1'' Opening Square Mesh Weave; With 1-inch mesh, the welded wire is flexible and tight enough to leave out large ground crawling arachnids

# Flexible Design for Easy Use; Flexible design makes welded wire roll easy to use for a number of applications, you can tailor it to your specific needs

ER4043, commonly referred to as “AlSi5", has a 5% silicon and is the oldest and one of the most widely used aluminum welding wires for general purpose applications

Less sensitive to weld cracking than other aluminum alloys and the 5% silicon content lowers the melting point, increases fluidity of the weld puddle and leaves a bright shiny weld deposit.

ER4043 is commonly used for welding grades 6061, 6063, 5052, 3004, 3003 and cast alloys 356.0, 357.0, 413.0, and 443.0 to name just a few

Premium quality ER308L stainless steel MIG welding wire 2-Lb spool.

Conformed to AWS A5.9/ASME SFA A5.9/ER308L. 2-lb net weight of ER308L stainless steel welding wire. 4" spool wrapped in moisture-resistant plastic film. Typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

For MIG welding (GMAW) stainless steel 304, 304L, 308, 308L, 321 and 347, etc. With a carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation. Most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures. Shielding gas required, usually Argon/CO2 mix.

All position copper coated welding wire containing a high level of manganese and silicon to produce welds on dirty or rusty steel

High silicon content provides fluidity of the weld puddle providing smoother bead appearance and minimizing post weld grinding

Superior wire surface finish for best feed ability and arc performance, increased manganese and silicon provide excellent cleaning action

MPN: 0-108-16, 1 pound jar/can

16 oz Jar

Non-toxic

Low spatter, High feedability, Porosity free, Good bead appearance, Easy to weld

Shielding gas is required: 80-percent Ar+20-percent CO2 or 100-percent CO2,All Positions, Single and multi pass welding

Mig solid welding wire for Carbon and Carbon-Manganese steels

Package Dimensions: 6.35 cms (L) x 20.828 cms (W) x 6.35 cms (H)

Product Type: Tools

Package Quantity: 1

Do Your Best Work ... Color all your clients impressed with the precision and arc control of the ER70S-6 solid MIG welder wire. You'll love the low splatter whether you're performing single or multi-pass welds. Great for T-joints, butt welds & lap welds.

Primed For Your Success … It’s hard to beat a solid MIG welding wire when it comes to creating beautiful beads that exude professionalism. To make your welds even smoother, we’ve included high levels of silicon and manganese deoxidizers.

Unlock a World of Versatility ... Professional welder, metalworking hobbyist, or DIY enthusiast, this MIG wire gives you the freedom to work on multiple projects. It has a 0.023" diameter.

Country Of Origin: United States

Model Number: H222108-R22

Item Package Dimension: 8.25" L x 8.25" W x 2.75" H

Designed for MIG wire feed welders

Excellent weld and bead appearance

Fast freezing characteristics

Designed to shield the back of the weld joint from oxygen

Model Number: S0FB01

Item Package Dimension: 3.38" L x 3.38" W x 4.0" H

COMFORTABLE TO WEAR––The design of the helmet conforms to ergonomic principles, and provides ample internal space, which makes it easy to operate and comfortable to wear.

FAST RESPONSE TIME –– Provides better protection for welders with fast auto darkening time <1/15000 seconds, step-less delay and sensitivity knob adjustable. 0.1S~1.0S Recovery time. 2 arc sensors. External step-less dark color adjustment. Step-less sensitivity control adjustment. Self-test function and low voltage alarm. No LED light.

WIDE SHADE RANGE –– The wide shade range is 9-13 covering most common welding / Plasma Cutting Processes; Great For TIG MIG MMA applications with grinding and cutting features. Bright state color level: DIN4. Infrared (IR) / UV protection class: DIN16.

Particularly On Thin-gauge Mild Or Galvanized Steel

Great In Single- Or Multi-pass Welds

Typically Used For Light Structural, Machinery Part Fabrication, Prefab Construction, Railroad Car Repair, Short Assembly Welds, Tanks And General Fabrication

Commonly used for general shop applications with poor fit-up.

Also commonly used for steel castings or forging salvage.

Great for home projects!

# Sturdy construction; Made of 16 gauge heavy duty galvanized wire, providing a double coating for maximum rust resistance and long life, vinyl coated for extra protection, the vinyl coated welded wire would be a good choice for everyone

# 0.5'' x 1" Opening Square Mesh Weave; With 0.5-inch by 1-inch mesh, the welded wire is flexible and tight enough to leave out large ground crawling arachnids

# Flexible Design for Easy Use; Flexible design makes welded wire roll easy to use for a number of applications, you can tailor it to your specific needs