Best Diamond Group in 2026

DIAMOND HOTT ROD HEATING ELEMENT KITS - Fits onto your existing tank

High quality 304 stainless steel heating element gives years of water heating service

Includes a fully adjustable thermostat that mounts directly to the tank surface to keep water temperatures from 110 Degree to 170 Degree Fahrenheit; factory preset to 140 Degree Fahrenheit

Self Contained wiring receptacle eliminates the need for an outlet box, wire stripping, wire nuts and wall plates

Secures to the wall with built-in adjustable pawls

For walls up to 1/2 inch thick

Screen measures 6-3/4" x 6-3/4" x 1-5/16"

Fits Suburban flush mount 6 gallon water heater doors

Protects the water heater from flying insect nests

Screen measures 6” x 8.5” x 1.3”

Heavy-duty stainless steel mesh cover

Fits Atwood 6 & 10 Gallon and Suburban 6 Gallon water heater vents

100% Satisfaction or your money back!: Our High Premium Magnesium RV Anode Rod products are built to last with oem quality and back by 1 Year Limited Warranty One-to-One Replacement Cover.

High Quality and Safe Material: Pure High-Quality Magnesium anode rod made from top-quality magnesium AZ63-alloy which is non-toxic and entirely safe for the human body! A magnesium water heater anode rod protects your tank better and lasts longer than aluminum/zinc rods.

Extend the life of your RV: Replacing the anode rod in a water heater before it fails can slow down corrosion inside the tank and significantly extend the life of the water heater.

100% Satisfaction or your money back!: Our High Premium Magnesium RV Anode Rod products are built to last with oem quality and back by 1 Year Limited Warranty One-to-One Replacement Cover.

High Quality and Safe Material: Pure High-Quality Magnesium anode rod made from top-quality magnesium AZ63-alloy which is non-toxic and entirely safe for the human body! A magnesium water heater anode rod protects your tank better and lasts longer than aluminum/zinc rods.

Extend the life of your RV: Replacing the anode rod in a water heater before it fails can slow down corrosion inside the tank and significantly extend the life of the water heater.

Magnesium anode rod

For use in RV water heaters

Absorbs the corrosive action caused by hot water

Extends the life of a water heater by corroding itself so that the water heater doesn't.Fit Type: Universal Fit

Magnesium anode rod

0.5" diameter x 4.5" long

The Package Length of the Product is 5.6 centimeters

The Package Width of the Product is 7.9 centimeters

The Package Height of the Product is 11.9 centimeters

Package Dimensions: 16 L x 6 H x 9 W (inches)

Package Weight: 0.5 pounds

Country of Origin : China

Circular Mesh Size: 2.83''x1.26''. Rectangle Mesh Size: 6''x8.5''x1.3''. Made from high quality and heavy-duty stainless steel, for maximum strength and longevity that resists corrosion.

BougeRV easy-to-install screen will help ensure that your furnace or water heater vent stays free from costly invasion by unwanted animals.

It comes with 6 springs and a tool to connect the springs to any of the vent openings takes no more than a minute or two to install.The color of the screwdriver is random (white or blue).

⛏️【SUITABLE SIZE】2 packs of screen covers for RV vents (Rectangular 8.5" x 5.9" x 1.3")(Square 4.5" x 4.5" x 1.3"), each mesh grid is 0.12 inch in length, which allows optimal airflow entering while keeping bugs away.

⛏️【KEEP PESTS OUT】Fit for most water heater and suburban furnace vents, the RV bug screen keeps flying, nesting insects, wasps, birds, rodents or mice from entering your RV, thus offering you cozy spaces indoors without much costs or any chemical damage.

⛏️【EASY INSTALLED AND REMOVED】You will receive 2 packs of RV furnace vent cover screen, 8 pcs of spring hooks and 2 installation tools. You can easily install the RV furnace vent screen in place with instruction. More hooks for better fixation and for next use.

Water heater repair parts for RV, Motor, Home,etc.Easy installation, if follow our installation instructions

Fits Models:GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E, GH6-6E, GH6-7E, GH6-8E, G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCG6A-9E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GCH10A-2E,GCH10A-3E, G10-1E, GH10-1E,G610-3E, GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, G6A-3E, GH6-3E, GH6-4E, G6A-4E, GCH6A-10E, GC6AA-10A, GC10A-4E, GCH10A-4E

Please check the part number before purchase to ensure proper coordination

Converts any RV LP gas water heater to 120v electricity on demand

Includes on/off power switch with mounting bracket and fully adjustable thermostat

All necessary power cords and color-coded wire assemblies are included

4,000- to 9,000-BTU radiant heater for spaces up to 225 square feet. Approved for outdoor use; clean-burning; nearly 100-percent efficient

When operating the heater at altitudes over 7,000 FT above sea level the heater may shut off.

Auto shut-off if tipped over, if pilot light goes out, or if detects low oxygen levels

6 gallon water tank

12,000 btu rating, With Insulation: Yes

Weight: 32.9 lbs

The ignition control board performs all the functions necessary to turn the furnace on and keep it running

Powered with 12V DC, the board sends signals to open the gas valve and emits a high output voltage that creates an ignition spark to light the burner.

Compatible with : Atwood Hydro Flame Furnaces: 7912-II, 7916-II, 7920-II, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D, 8500-IV Series, 8500-III Series, 85-II Series, 85-I Series, 8900-I DC Series, 8900-II DC Series, 8900-III DC Series, AFSD12, AFSD16, AFSD20, AFMD20, AFMD25, AFMD30, AFMD35, DFMD20111, DFMD25111, DFMD30111, DFMD35111 DFSD12111, DFSD16111 and DFSD20111.

Professional Element Socket: Easily replaces screw-in electric water heater elements

Compatibility: Compatible with standard ½-inch socket drives

Fits: Standard hex bushing water heater elements

Product type : AUTO ACCESSORY

package height : 5.588 cm

package length : 1.27 cm

NEWEST MODEL: Replaces Atwood 93851.

COMPATIBLE WITH WATER HEATERS: Models GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E.

COMBO BOARD: Controls BOTH the LP ignition and the Electric Element. Atwood part #93309 (edge pin connector) NOT included.

UK distributor for Eberspacher. Genuine UK dealer warranted replacement part

Includes special tool Glow pin strainer

Service parts included as shown in image.

※ Made of heavy stainless steel material, high oxidation resistance, high corrosion resistance and durability

※ Compatible with most Colman, Suburban, Sol-Aire, Hydroflame furnace vents. Please confirm the size before purchase

※ Two high-quality fixed springs that can firmly tighten the insect-proof screen to avoid the troubles caused by falling off

Package contents: you will receive 2 pieces of flying insect screen, 2 pieces of spring hooks, 2 pieces of silicone rubbers and 1 piece of installation tool, totally 7 pieces; This carefully matched design will lower your level of installation difficulty, and you don't need to spend extra time and energy to find installation tools

Size information: each furnace vent cover is 2.8 inch in diameter, 1.8 inch in depth, each mesh grid on the cover is 0.3 inch in length, each spring hook is 1 inch in length, each silicone rubber is 8.66 inch in length; Our quality products are compatible with each other

Protection function: the flying insect mesh screen fits for most RV refrigerator vents and suburban furnace vents, protects the vents to stay away from cockroaches, rats, wasps and birds; It can protect you from flies and make your RV more clean, making your outdoor life more comfortable

RV Water Heater Replacment Part: The water heater thermal cut-off kit is designed for RV electronic water heaters, it is a necessity for RV water heaters as a safety device in the event of a water heater flare up.

UL Certified Replacement: UL certified replacement part for RV water heater, made of quality tinned copper wires, thermal cut off 98℃(208℉) water heater parts

Easy to Install: The thermal cutoff kit comes with instructions, which is convenient for your installation; If the connector we provide is a different size than the one in your water heater, keep a spare connector so that you can easily crimp in a new one.

Completed cutoff kit: the RV water heater thermal cutoff kit can effectively regulate the water temperature of the RV, so you can avoid scalding due to high water temperature

Safe for use: the UL listed copper wire and fuse provide you a safe water environment, and ECO thermostat assembly can work well to prevent accident

Easy to install: coming with a detailed user manual, there is only a few steps needed to do, you can install it in short time

Specification: For RVGUARD 2-pack screen, each mesh grid is 0.3 inches in length. 2.8 diameter x 1.3 inches tall, fits most Duo-therm and Suburban furnace vents.

Last to Use: RVGUARD pest screens are made with high-grade stainless steel to ensure they stay intact and corrosion-free over your vents so your investment stays protected. And it is easy to clean to look good.

Easy to Install: Simple installation with all needed tools included: 2 stainless steel spring hooks, 1 installation tool, and silicone rubber. The silicone rubber edging provides noise and scratch-free application even during cold weather. Instruction is also included. It takes no more than two minutes to install.

【USA-Based and 1-Year Replacement】- as an American company we offer our customers the best service and products. Shop local with confidence, to guarantee the quality of our products, enjoy a 365 day, one-to-one replacement policy

【High Quality and Safe Material】- INCOLOGY 840 Material better than Stainless Steel - High Watt Density 1440w/120v and High-Performance Alloy - Made from high-quality material and able to withstand greater temperatures than typical RV water heater elements. This water heater part is a great option for RV, Camper, Travel Trailer prone to hard water issues

【Quick and Easy Installation】- the structure of this element is a screw-in type, taking just minutes to perform routine maintenance. Compatible most RV/Camper Water Heater 120v with minimum 6 Gallons and Up. Replacement Part# Suburban 520900

SAFETY FIRST: UL certified emergency cutoff assembly designed to prevent accidents

COMPATIBILITY: Fits most Atwood 110 volt electric water heaters,GLM 21140, Mallory 9-72153, Mercruiser 45518A2, 45518A3 , 45518A1,GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E, GH6-6E, GH6-7E, GH6-8E, G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCG6A-9E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GCH10A-2E,GCH10A-3E, G10-1E, GH10-1E,G610-3E, GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, G6A-3E, GH6-3E, GH6-4E, G6A-4E, GCH6A-10E, GC6AA-10A, GC10A-4E, GCH10A-4E

EASY INSTALLATION: 140 degree TStat switch was the 60 degree C and the 180 degree EOC cut off is the 82 degree C which are printed on the back of switch,attached installation instruction

❅ Heating Element # 3850644422 AC 120v 325w.

✿ Replacement Parts for Dometic Refrigerator Models DM2652/ DM2662/ DM2663/ DM2852/ DM2862/ NDM1062 Includes wire lead.

✪ Installed easy and works like the original one did.100% of the products have been rigorously tested to ensure that each product received by our user can work perfectly.

Prolongs the life of your water heater tank

Absorbs the corrosive action caused by hot water

Made in China