Best Atwood Rv Water Heater Thermostats Elements Parts in 2026

100% Satisfaction or your money back!: Our High Premium Magnesium RV Anode Rod products are built to last with oem quality and back by 1 Year Limited Warranty One-to-One Replacement Cover.

High Quality and Safe Material: Pure High-Quality Magnesium anode rod made from top-quality magnesium AZ63-alloy which is non-toxic and entirely safe for the human body! A magnesium water heater anode rod protects your tank better and lasts longer than aluminum/zinc rods.

Extend the life of your RV: Replacing the anode rod in a water heater before it fails can slow down corrosion inside the tank and significantly extend the life of the water heater.

Magnesium anode rod

For use in RV water heaters

Absorbs the corrosive action caused by hot water

The Package Length of the Product is 5.6 centimeters

The Package Width of the Product is 7.9 centimeters

The Package Height of the Product is 11.9 centimeters

Water heater repair parts for RV, Motor, Home,etc.Easy installation, if follow our installation instructions

Fits Models:GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E, GH6-6E, GH6-7E, GH6-8E, G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCG6A-9E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GCH10A-2E,GCH10A-3E, G10-1E, GH10-1E,G610-3E, GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, G6A-3E, GH6-3E, GH6-4E, G6A-4E, GCH6A-10E, GC6AA-10A, GC10A-4E, GCH10A-4E

Please check the part number before purchase to ensure proper coordination

Professional Element Socket: Easily replaces screw-in electric water heater elements

Compatibility: Compatible with standard ½-inch socket drives

Fits: Standard hex bushing water heater elements

Product type : AUTO ACCESSORY

package height : 5.588 cm

package length : 1.27 cm

NEWEST MODEL: Replaces Atwood 93851.

COMPATIBLE WITH WATER HEATERS: Models GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E.

COMBO BOARD: Controls BOTH the LP ignition and the Electric Element. Atwood part #93309 (edge pin connector) NOT included.

Compatible: Compatible with all models Atwood RV Water Heater. Replacement Part for Suburban 11553.

Corrosion Protection: Extends the life of a water heater by attracting corrosive elements in the water.

Size and Material Type: Magnesium anode rod, 4.5" long, 1/2’’ NPT threads, Use a 22mm or 7/8” socket to remove.

SAFETY FIRST: UL certified emergency cutoff assembly designed to prevent accidents

COMPATIBILITY: Fits most Atwood 110 volt electric water heaters,GLM 21140, Mallory 9-72153, Mercruiser 45518A2, 45518A3 , 45518A1,GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E, GH6-6E, GH6-7E, GH6-8E, G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCG6A-9E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GCH10A-2E,GCH10A-3E, G10-1E, GH10-1E,G610-3E, GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, G6A-3E, GH6-3E, GH6-4E, G6A-4E, GCH6A-10E, GC6AA-10A, GC10A-4E, GCH10A-4E

EASY INSTALLATION: 140 degree TStat switch was the 60 degree C and the 180 degree EOC cut off is the 82 degree C which are printed on the back of switch,attached installation instruction

Water heater access door

Suburban's goal is to manufacture the most durable and efficient products available

Part number: 6255AEB

Easy to Use Kit: Helps you easily remove and replace your RV's water heater drain plugs

Compatibility: Included wrench fits both 7/8-inch and 15/16-inch drain plugs

Angled Design: Allows wrench to reach tight places

Minimum tank diameter 15"

Easy to Install

Rating: 240V/4500W

SAFETY FIRST - Emergency cutoff assembly designed to prevent accidents.

EASY INSTALLATION - Mounted on the front of Atwood water heater.

COMPATIBILITY - Fits most Atwood 110 volt electric water heaters.

Made from quality materials

Country of Origin: China

Helps you provide comfort and convenience

Premium Ultra Low Watt Density heating element has 5 year warranty

240V/4500W

UL Listed

【What You Receive】You can get 6 pieces of water heater drain plugs and 1 piece of tape to make it leak proof, spare plugs are convenient for your replacement, enough quantity to meet your daily life water heater use and replacement.

【Good Compatibility】Our white plastic drain plugs are compatible with RV, Camper and Atwood water heaters models, you can replace 1/2 inch water heater drain plug, please verify the size of your drain hole before ordering.

【Convenient to Install】You should firstly wrap the drain plug threads with tape to prevent leaking, then use a 7/8 inch wrench to replace quickly and easily, align the product with the sewage outlet of the water heater, and turn the wrench firmly, easy to install and ready to use.

RV thermostats this product is of good quality

Easy and flexible to use

Manufactured in China

Useful RV water heater tool kit, contains 1 wrench, 4 drain plugs and 1 PTFE tape.

Special angled design wrench, helps you reach tight places and rotate drain plugs. Suitable for 15/16 inch and 7/8 inch.

1/2” NPT water heater drain plugs fit for most RV water heater.

Helps you provide comfort and convenience

Durable and safe

Please ensure part will fit before ordering

【Standard 1/2'' Size】The thread size of our rv water heater drain plug is 1/2" NPT male threads, this RV water heater replacement drain valve great replacement for your RV water heater

【Additional Teflon Tape】Teflon tape is a necessity for replace hot water heater valve, made of PTFE material, has a sealing function to prevent the leakage of water

【Brass body and Steel Handle】The body of the drain cock is made of high quality brass, the top of the drain cock is made of hardened steel. Heavy duty hardened steel material and good structure can ensure that the rv water drain valve can provide long term service

The Atwood XT 10- Gallon water heater provides the equivalence of a 16- Gallon unit without increasing the space required

Saves weight while fitting in the same cut-out dimensions of other Atwood water heaters

Comes pre-configured with a winterization bypass kit, tee fittings, hoses and a thermostatically-controlled mixing valve with check valves in both inlets

Suburban Water Heater Replacement Parts - Module Board for SW6 and SW10 (requires 67288 cover)

Element wrench

Zinc plated

Fits all screw-in elements

ATWOOD WATER HEATER MAIN BURNER

Universal kit design for any automotive vehicle car or truck.

Activates one 12V fan with a maximum draw of up to 15 amps.

Preset turn-on and turn-off temperature for your electric fan.

MAIN PURPOSE: This diesel generator water heater is suitable for all kinds of engine coolant preheating, with small heat loss, efficient and durable.

WITH THERMOSTAT: This water heater with thermostat regulates the coolant temperature between 100‑120℉, suitable for a wide range of applications.

DURABLE MATERIAL: The heater is made of excellent ABS and aluminum alloy, with vibration and shock testing to ensure safe and reliable operation.

HIGH QUALITY: The outboard engine anode is made of metal, which is durable and hard to bend, deform or break, ensuring safe use and environmental protection.

DESIGN ADVANTAGE: The anode parts are light and durable, with corrosion resistance, thick bottom, strong and durable, high hardness, and strong enough corrosion resistance.

PRODUCT FUNCTION: The anode of the outboard gear box can effectively prevent seawater from corroding the outboard engine block to preserve the engine from expensive damage.

High Watt Density heating element

240V/5500W

UL Listed