Best Digiyes in 2026

Package include: 4pcs TT DC Electric Motor, 4pcs plastic tires.

This is a TT DC Gearbox Motor with a gear ratio of 1:48, and each comes with 2 x 200mm wires with breadboard-friendly 2.54mm(0.1") male connectors.

Dimension of the Tire: Outside Φ65mm/2.56"; Width 27mm/1.06".

The A4988 is a complete micro step motor driver with built-in converter for easy operation.

The product can operate bipolar stepping motor in full, half, 1/4, 1/8 and 1/16 step modes, and the output drive performance can reach 35V and 2A.

The converter is the key to the easy implementation of the A4988. As long as a pulse is input into the Step input, the motor can be driven to generate micro steps. No phase sequence table, high frequency control line or complex interface programming is required.

This chip has a precision 25MHz crystal reference and internal PLL and dividers.

The Si5351 is a versatile I2C programmable clock generator that is ideally suited for replacing crystals, crystal oscillators, VCXO, PLLs, and buffers.

Si5351 is based on PLL / VCXO + high-resolution multi synthesizer structure, and can output 8KHz - 150MHz clock signal with an error of 0ppm at each output port by setting a phase locked loop and a frequency divider.

TT Motor Robot Gear Motor, Load Current: 70mA (250mA MAX) (3V); Maximum Torque: 800 GF CM Min (3V) ; No-load Speed: 1:48 (3V).

The operating voltage of the motor is 3V - 12V DC, recommended to be 6V - 8V.

Pure copper wire surrounding, low current, good conductivity, low heat, stable operation.

Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

This product is made from high quality materials and designed for long-lasting performance.

This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

【Durable】Durable metal construction for long-lasting performance.

【More Funny】Provide the option of being able to change your gear ratio for different track conditions.

【💡】48P is the pitch of each tooth on the pinion gear and the 19T 20T 21T 22T 23T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh.

The new upgrade, a larger 050 size brushed motor option for the Axial SCX24.

050 Motor PRO provide increased power and torque compared to the stock motor

Rotor with a strong structure guarantees outstanding performance and super durability

Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs

5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos

LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v

Input voltage MAX: 2s - 3s Lip; 6 - 9 cell NiMH (2s only for Short Course Trucks)

ESC Size: L: 1.93" W: 1.48" H: 0.79" (1.96 oz.)

MOTOR Size: L: 52.7mm, Diameter: 36mm and M3 @ 25mm Mounting Holes.

✔Include: 10 male & 10 female connectors w/Shrink tubing.

✔Max. current: Approx 120A

✔Material: durable flame-resistant gold-plated copper & hard plastic.

TT02B

Complete kit includes: Helical gear and top hat assembly, worm gear, wear bushings, grease, and hardware needed to replace the chain drive gears.

Our Chain Drive Gear and Sprocket Kit is a complete chain drive gear and sprocket replacement kit. This gear and sprocket assembly is compatible with various chain drive garage door openers; manufactured after 1993.

Replacement parts for chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models.

KEEPS Motors Cool! Make your electric motor run more efficiently by keeping it cooler!

HIGH Quality Aluminum

WORKS on 540 and 550 Size Motors

Color:Red and Blue,Material:Plastic.Number of Vane:4 Vane

Blade width：31.2mm/1.23 inch;Aperture：2mm/0.078 inch

Will work with many kind of 130 dc motor with 2mm shaft

Scaled Down Version of the 1/10th 22T

Brushless 2-in-1 motor/ESC configuration

Dynamite 7.4V 2S 800mAh 50C LiPo Battery

Package Include:10 female and 10 male connectors

Low resistence, and gives the best electric flow.They readily heat up and take solder well.

Diameter: 3.5mm

Package content: Powerfun 70mm EDF+3400KV/4S motor+80A ESC(2~6S) high voltage version ESC.Excellent Powerfun EDF,3400KV powerful motor,max thrust is 1810g,Thus we recommend 4s battery.

High-Quality ESC80A :2~6S high voltage version ESC,Current:80A,Burst current(≤10s):100A, BEC mode:Switch,BEC Output:5V/5A,battery type:Lipo/NiMH,Supports 2S~6S Lipo,Support 5~18cells NiMH. The plug has been soldered, the standard default is the xt60 plug,Eliminate customers' own welding, change troubles, avoid subsequent inspections and quality problems.(more models T, EC3, EC5, etc., if necessary, please contact us to customize)

Advantages:Powerfun EDFwith ESC package is more favorable.This is the best combination that will give you the best experience.And all the powerfun EDF with motor have already dynamic balance tested.Running smoothly,Easy cooling,Stable structure,Safe and durable,excellent realistic sound.Make your plane more Efficient and stable.All the Powerfun motor haav already soldered the banana plug.

New upgraded motor material for better performance

High Torque Magnet and Rotor, smoothness for best reliability

Heat-resistance running motors allow faster speeds, longer runtime

Ultra high-temperature sintered Neodymium magnets provide massive torque and linear power

Optimized for power and efficiency in 1/10th scale vehicles

Low-maintenance, unique Traxxas design with efficient, high-speed ball bearings

Custom 540 steel casing, built-in capacitor to minimize shine.

Lines are welded, easy to install and durable in use.

Brushing 540 engine 20T 27T 35T 45T are optional.

Colorful Shaft Propellers -- 12 Pieces 2 style different colors shaft propellers, 6 pieces 4 Vanes shaft propellers, 6 pieces 3 Vanes shaft propellers can meet your different needs, let you make science and STEM projects much more fun and more choices to fit your experiments

DC Motors -- Body Diameter: 28mm/ 1.06"; Mounting Hole Distance(center to center): 15mm/ 0.59"; Shaft Size: 10 x 2.0mm/ 0.39" x 0.08"(L x D); Motor Body Length: 38mm/ 1.46"

Wide Applications -- This complete motor kit take everything you need for DIY toys, such as mini fan, cars, boat, planes, electric toys etc. The mini wheel, axle and plastic gears can make small STEM toys very simple by matching anything

batterychemistry_LiPo, mpn_38010600, type_RCS-MOT-BL-ESC

The most powerful 7x16mm motors are upgraded from 17500KV to 19000KV. We are sure that these motors will turn your micro whoop into powerful monster.

Weight is 2.95g per motor (including cables and connector); Size: 7x16mm

With JST 1.25mm 2-Pin connector, perfect for Blade Inductrix, Tiny Whoop flight controller

CASTLE is a top producer of high performance, high quality products for RC aftermarket upgrades with a 25-year track record of innovation and record-breaking performance. Our power systems are ideal for those who desire higher efficiency, advanced features and improved optimization for their stock upgrade or build. The SIDEWINDER 8 SPORT ESC is proudly DESIGNED, ASSEMBLED AND SUPPORTED IN OLATHE, KS. USA.

The SIDEWINDER 8 SPORT ESC has been a power upgrade for 1:10TH SCALE MONSTER TRUCKS AND 1:8TH SCALE BUGGIES, TRUGGIES AND ON-ROAD VEHICLES since 2014. It’s perfect for entry level, weekend basher, or serious road warriors seeking the benefits of an affordable brushless upgrade.

Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software or the Castle Link mobile app and a B-Link Bluetooth Adapter (sold separately).

D2826-1400kv the max watt is 205W, 40A ESC and 9*4.7，7*4，propellers are recommended；the motor uses 3.5MM banana male connection plug

Featuring 14P12N 42SH Level Magnet High Torque Motor Design ,Precision Balanced Rotor Test, motors proide high effeciency stator design

CNC machined Aluminum Bell and Imported(NSK/NMB) Bearing ，mtoro small size ,lightweight and long life

Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

This product is made from high quality materials and designed for long-lasting performance.

This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Titan 550 motor (reverse rotation)

(21-turns/ 14 volts)

Powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque

1400Kv (RPM per Volt)

Works with 2-4s Li-Po Battery (6.5v - 16.8v)

Recommended to use a 30A ESC

INJORA 540 Brushed Motors feature premium quality materials combined with high strength magnets for unmatched brushed motor speed and torque.

The INJORA 540 Motor is a powerful, reliable, economical, and versatile choice for those who prefer brushed motor power.

Direct-solder tabs allow installation in a variety of applications, and the rebuildable design provides easy access to the commutator with replaceable brushes and springs.

INJORA 540 Brushed Motors feature premium quality materials combined with high strength magnets for unmatched brushed motor speed and torque.

The INJORA 540 Motor is a powerful, reliable, economical, and versatile choice for those who prefer brushed motor power.

Direct-solder tabs allow installation in a variety of applications, and the rebuildable design provides easy access to the commutator with replaceable brushes and springs.