Best Motor Gear Kit in 2026

(2) Actuators

(2) 6.75" Mounting Straps

(2) 8.5" Connecting Rods

Compatible Maintenance - 18:1 ratio metal stripped gear fits for V Lippert Tuson Venture. Small teeth count 85 and diameter is 2 1/4”. Larger teeth count 25 and diameter is 1 1/8”. Height of gear when laying flat on a table is 15/16”.

Slide Out Motor Repair - 18:1 ratio metal gear to repair your stripped RV slide out motor. Save money, no need to buy a new motor. New gear can effectively solve the original actuator breakdown issue, restore the system function.

Durable Metal Gear - Made of sturdy metal instead of plastic gears. More sturdy and durable, with long service life. Directly match the factory quality. Every part has been checked for high quality replace part.

【ALL-METAL GEARS】: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.

【PURE COPPER WIRE CORE ROTOR】: With precision winding technology, the geared motor power instant increased by 30%.

【D SHAPED OUTPUT SHAFT】: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.

“B" Linkage Gearbox.Fit Type: Universal Fit

Replacement kit for 28/31/37/39 Step Series; Step is not included with this repair kit

This replacement kit contains an IMGL (integrated motor/gear box/linkage assembly, a Control Unit, four-way pigtail, and fastener kit.

FITMENT: Compatible with FX35 2004-2006, FX45 2003-2008, Q45 2002-2005, Murano 2003-2007.

Functions: The driver's or passenger's power seat may not be able to move correctly or make noise, these old gears may be worn or damaged. HERCOO‘s new seat adjustment track rail gear repair kit make your seat move back and forth perfectly.

High Quality and Cost-effective: The power seat track rail drive gear motor repair kit is made of sturdy POM material to prevent premature wear and breakage, it is built to long lasting durability. Save your lots of money and time by replacing this gear rather than replacing the whole system.

Dc motor Kit Content: 4pcs yellow electric motor with 1:48 reduction ratio, 4-piece plastic tires with tread pattern,1pc 20cm(7.87inch) 40pin Male to Female connector wires,4pcs TT DC motor Support, 8pcs M3*8 screws, 8pcs M3*30 screws, 8pcs M3 nuts for fixing

Electric motor : Operating voltage: 3V~6V DC, Maximum torque: 800gf cm min (when it is 3V), No-load speed/Reduction ratio: 1:48; RPM:115; Load current: 170mA (when it is 4.5V)

Size: Car wheel/Tire: OutsideΦ67mm/2.6"; Width 27mm/1.06"; Motor: 64.2x22.5x22.5mm/2.53x0.9x0.9inch (without the shaft)

Application: for arduino controlled smart car chassis, Robotics

This is a DC Gearbox TT Motor with a gear reduction ratio of 1:48 at speed 200rpm, and the TT motor comes with 200mm 28AWG dupont wire with breadboard-friendly 2.54mm(0.1”) male connectors. Perfect for plugging into a breadboard or terminal blocks.

Rated Voltage: 3~6V, Continuous No-Load Current: 150mA +/- 10%

24V Brushless Motor: The 1.8hp equivalent Direct Drive motor provides quiet and efficient power delivery without the use of internal gears, powering you along at up to 5 knots!.

Aluminum Motor Mount: The 4 bolt motor mount attaches directly to PowerPole ready fishing kayaks, and can be installed on other kayaks using a drill,.

Battery Options: The motor can be used with lead acid deep cycle or lithium deep cycle batteries with a nominal output voltage between 24V & 29V. Note: Some lithium batteries output higher than the rated voltage, choose wisely,.

High efficiency plastic

Designed for advance torque and speed

Premium grease

【Direct Replacement】: If your headlights cannot be turned on, partially turn on or turn off the headlights, or the headlights jump up and down when starting, or make a loud friction noise during operation, it will greatly affect the driving safety. It is recommended that you promptly Buy this brass gear kit to repair the motor. The kit meets or exceeds OEM standards, and has been factory tested, fully matched with the original car, and can be installed directly

【Excellent Design】: Old plastic gears can't stand the heat and will wear out or break the teeth over time, causing the headlight to fail and cause you trouble. Made of reinforced brass, this gear has been expertly designed and constructed to ensure excellent wear and heat resistance for extended life. As an upgrade to the plastic version, this will reduce your frequent breakdowns and tedious replacements.Compared to replacing the entire motor, this is undoubtedly a more practical choice.

【Fits For】: 2000-2004 Chevrolet Corvette | 1993-2002 Pontiac Firebird | 1991-1996 Saturn SC and SL | 1992-1994 Pontiac Sunbird Note: Some early production 2000 Corvettes were built with previous-generation style motor components. Late type motors have a plastic gearbox and a rubber boot on top of the motor. If not the kit is mismatched

Hardened steel gear

Steel cover plate

Premium grease

8PCS TT DC Gearbox Motor with a gear ratio of 1:48.

Comes with 28AWG wires 2.54mm(0.1”) male connectors, perfect for plugging into a breadboard or terminal blocks.

With EMC, it has strong anti-interference ability and causes no interference to micro-controller.

Package include: 4pcs TT DC Electric Motor, 4pcs plastic tires.

This is a TT DC Gearbox Motor with a gear ratio of 1:48, and each comes with 2 x 200mm wires with breadboard-friendly 2.54mm(0.1") male connectors.

Dimension of the Tire: Outside Φ65mm/2.56"; Width 27mm/1.06".

✔【Ideal Replacement】：Headlight Motor Repair Brass Bronze Gear Kit Replace And Repair Damaged Kits . It Can Solve The Problem That Your Headlights Cannot Be Turned On Or Off Normally, The Headlights Jump Up And Down Or Keep Flashing When Starting, And Make A Loud Noise When Running . Some Early Production Were Built With Previous-Generation Style Motor Components. Late Type Motors Have A Plastic Gearbox And A Rubber Boot On Top Of The Motor. If Not The Kit Is Mismatched， Please Check The Part Number Before Buying To Make Sure It Fits Your Car

✔【High Quality And Special】: Headlight Headlamp Motor Repair Kit with Fix Brass Gear Is Made Of High Density Material . Can Stand Continuous Heat Up To 360 Degrees，Much Denser And More Durable，Give You Long Term Stability And Good Performance, Reduce Your Frequent Breakdowns And Tedious Replacements , Its Lightweight Construction Allows It To Be Carried And Operated By One Person，Easy To Install, Allow Epoxy To Cure Overnight Before Installation . Whether For Immediate Use Or As A Backup, It Is A Better Choice, Each Product Is Repeatedly Tested By The Factory To Meet Or Exceed Oem Specifications . Start A New Journey For You !

✔【Compatible With】: Fit For Chevy Corvette C5 00-04 | Pontiac Firebird Trans Am 93-02 | Sunbird 92-94 | Saturn headlight motor 91-96

55pcs colorful gears set, style different colors shaft propellers, can meet your different needs, let you make science and STEM projects much more fun and more choices to fit your experiments

Electric 130 dc motor: silver + red ; voltage: DC 3V-12V; no-load speed: 9000RPM- 25000RPM ±10%; motor body diameter: 27mm/1.06""; shaft size: 10x2.0mm/0.39""x0.08""(L*D); motor body length : 38mm/1.46"".

TT motor robot gear motor operating voltage: 3V~12VDC (recommended operating voltage of about 6 to 8V); Operating Voltage: 3V~6VDC; Batch Number: Double axis 1:48; Load Current: ≤150mA (200mA MAX)

Replacement for 1993-2002 Firebird, 1991-1996 SC and SL, 1992-1994 Sunbird

Made by high quality plastic material, lightweight, colorfast and durable. Stable performance, high reliability

Can slove problems for headlights cannot be turned on, partially turn on or turn off the headlights, or the headlights jump up and down when starting, or make a loud friction noise during operation

Power Window Motor Gear Kit

Compatible with or fits: (Note: To 5/01/92; Position: Front Left; 1992 Ford F-150) (Position: Front Left; 1981 - 1991, 1996 - 1998 Ford F-150) (Note: To 5/01/92; Position: Front Right; 1992 Ford F-150) (Position: Front Right; 1981 - 1991, 1996 - 1998 Ford F-150)

Power Window Motor Gear

PINION GEAR PULLER. This gear puller is designed for pulling pinion gears off small and medium-sized motors such as rc modeling motors, door lock actuator motor, 3D printer extruder, stepper motors, electric track vehicle...

REBUILD & SAVE MONEY! Sometimes pinion gears wear out before electric motors get broken. Before getting a pricey new motor, try to replace the pinion gears first. That's when this pinion gear puller comes in handy! A money-saver!

THICKNESS. The sliding plate of the gear puller has two ends of different thickness. So it can be more likely inserted into the gap between the pinion gears and the top of the motor. A must-have RC tool!

Replacement Motor Service Kit

For use in replacement parts only

Used in Leveling

4pcs plastic tires with tread pattern, wheels material: plastic,tire diameter: 2.75""/69mm,tire width: 1.18''/29mm

TT motor operating voltage: 3V~12V DC (recommended operating voltage of about 6 to 8V) with 2×200mm wires; Maximum torque: 800gf cm min (when it is 3V) ;No-load speed: 1:48 RPM:200(when it is 4.5V); Load current: 170mA (when it is 4.5V)

Mini Electric Motor is a general purpose motor, work with batteries or solar cells perfectly Great replacement for the rusty or damaged DC gear motor on the machine

🚙【Fitment】: SCX24 030 55T brush RC motor with Carbon upgrades for Horizon Axial. 🚙for models ✨#AXI90081 ( T1, T2 ); ✨#AXI00001 ( T1, T2 ); ✨#AXI00002 ( T1, T2 ); ✨#AXI00005 ( T1, T2 ); ✨#AXI00006 ( T1, T2, T3 ).Replacement part for AXI31619.

🔥【Package】The all-inclusive kit contains 1 piece 030 size carbon brushed motor 55 Turns; 1 pc 11 teeth steel pinion gear.

🔥【Highlights】High tork, with upgraded carbon brush craftsmanship, the RC motor are faster than the metal brush.

Fit for: 2000-2004 Chevy Corvette C5; 1993-2002 Pontiac Firebird Trans Am; 1992-1994 Sunbird; 1991-1996 Saturn headlight motor.

Part Number: 51072-54 51072 16530235 16530236 16521997 16521998 16524229 16524230 12335998 12335999.

Product Features: High quality material, A+ performance in both function and life time.

【ALL-METAL GEARS】: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.

【PURE COPPER WIRE CORE ROTOR】: With precision winding technology, the geared motor power instant increased by 30%.

【D SHAPED OUTPUT SHAFT】: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.

Material: Metal, Electronic Parts

Easy to install and save, put them in a sealed bag when not in use to prevent damp rust

High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable

【ALL-METAL GEARS】: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.

【PURE COPPER WIRE CORE ROTOR】: With precision winding technology, the geared motor power instant increased by 30%.

【D SHAPED OUTPUT SHAFT】: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.

【PREMIUM MATERIAL】The electric scooter motor kit is made of high quality aluminium alloy material, which is rustproof, high strength, resists heat, cold, and deformation, sturdy and durable. Robust and reliable metal material shell protect the inner circuit from thermal overloading.

【HEAT DISSIPATION HOLES】The air compressor motor has multiple heat dissipation strips for heat dissipation. It can also guard chips and objects against dropping in the motor and causing accidents. This dc electric motor is a forward and backward rotation motor so that you can switch rotation gears effortlessly.

【FUNDAMENTAL PARAMETERS】This electric gear motor is powerful and efficient. Input Voltage: 12V DC, Output Power: 250W, Rated Current: 28A, Rated Speed: 2750 RPM, Sprocket: 11T. Package includes a controller, a 3 hole 72 teeth chain wheel, a 146 links chain, and a throttle grip to meet your need.

【Practical and Reliable】10 Tooth Sprocket,Our 9 teeth 11 teeth motor gear kit delivers practical and reliable performance, providing users with complete gear accessories and ensuring optimal compatibility with a wide range of applications.

【Simple Installation】Reduction Motor Pinion,Our gear fittings are effortless to install, operate, and learn. However, we recommend verifying the model and size before ordering to ensure accurate selection of the appropriate part.

【Durable Carbon Steel Material】Gears Sprocket,Constructed from durable carbon steel material, our gear accessories exhibit exceptional strength and longevity, ensuring they are resistant to damage and won't require frequent replacement.

High-quality Manufacturing: The new after-sales market sunroof gear has high-quality functions, which is an important part of the vehicle sunroof operation

Product Specifications: The motor gear repair kit's 19 tooth / outer diameter is 17mm / 0.7 inches. The inner diameter is 6.5 * 8mm / 0.2 * 0.3 inches. Strong corrosion resistance, less wear and long -term service life

High-quality Stainless Steel: The Sunroof Motor Gear is made of high-strength stainless steel materials. This skylight motion gear has anti-corrosion, anti-raid, wear resistance, durable, strong strength, wear resistance and lasting time

Size - Modulus: 0.3; Outer Diameter: 4mm Gear Shaft, 9.5mm Gear Wheel; Inner Diameter: 0.98mm Gear Shaft, 4mm Gear Wheel; Gear Thickness: 5.6mm / 0.22"; Direction of Rotation: Right, Reduction rate: 30 : 1, Z1=1.

Material - The set is made of brass material, not easy to wear and tear, durable, and can last for a long time.

Feature - The gear wheel shaft set is compact, small volume, and light weight, it is easy to install and use, and the transmission process is smooth.