Best Greartisan Gear Kit Motors in 2026

This item is designed to fit specific vehicles

package weight :8.0lbs

Product type :AUTO PART

【ALL-METAL GEARS】: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.

【PURE COPPER WIRE CORE ROTOR】: With precision winding technology, the geared motor power instant increased by 30%.

【D SHAPED OUTPUT SHAFT】: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.

“B" Linkage Gearbox.Fit Type: Universal Fit

Replacement kit for 28/31/37/39 Step Series; Step is not included with this repair kit

This replacement kit contains an IMGL (integrated motor/gear box/linkage assembly, a Control Unit, four-way pigtail, and fastener kit.

550 12V 30000RPM Drive Engine

550 drive engine is made of high strength plastic board combined with high quality motor

Please make sure that the purchased parts have the same appearance as the original,Buyers can learn the model number from the motor

East Lake Marine Electric is located in Oldsmar, FL.

Compatible to use on Lippert Slide out & Leveling systems

Compatible with Lippert #167576, 414018 & Bosch #F000MM0809

Dc motor Kit Content: 4pcs yellow electric motor with 1:48 reduction ratio, 4-piece plastic tires with tread pattern,1pc 20cm(7.87inch) 40pin Male to Female connector wires,4pcs TT DC motor Support, 8pcs M3*8 screws, 8pcs M3*30 screws, 8pcs M3 nuts for fixing

Electric motor : Operating voltage: 3V~6V DC, Maximum torque: 800gf cm min (when it is 3V), No-load speed/Reduction ratio: 1:48; RPM:115; Load current: 170mA (when it is 4.5V)

Size: Car wheel/Tire: OutsideΦ67mm/2.6"; Width 27mm/1.06"; Motor: 64.2x22.5x22.5mm/2.53x0.9x0.9inch (without the shaft)

Club Car Golf Cart Motor - 36/48 Volt Golf Cart Motor - ONLY Series golf carts - Stock 10 Tooth spline - 24 mph & 15% Less Torque versus a stock Golf Cart Motor. (Club Car Electric Motor)

This motor is an economical way to get some more speed as long as you do not mind losing torque. Perfect for flat on-road environment with minimal hills and no backseat or bed. May require controller upgrade. (Club Car Electric Motor)

Replaces the following OEM numbers: 1012191, 1018134-01, 1017857-04, 101785704, 5BC48JB764, D00-4008A, D00-4008, D379 , 5BC48JB844

Application: for arduino controlled smart car chassis, Robotics

This is a DC Gearbox TT Motor with a gear reduction ratio of 1:48 at speed 200rpm, and the TT motor comes with 200mm 28AWG dupont wire with breadboard-friendly 2.54mm(0.1”) male connectors. Perfect for plugging into a breadboard or terminal blocks.

Rated Voltage: 3~6V, Continuous No-Load Current: 150mA +/- 10%

High speed Tuson landing gear motor for fifth-wheel RVs

Motor only no other parts included

For use on Lippert power landing gear assemblies

High efficiency plastic

Designed for advance torque and speed

Premium grease

MOTOR’S SPECIFICATIONS - Part Number: 368417, 1010000010, 1510000006, RV Slide Out Motor Dual Shaft, 12V DC Motor, Speed 9 RPM @ 850 in-lbs, 17 Amps 12 RPM @ 400 in-lbs, 9.5 Amps 14 RPM (no load) Voltage 12 DC Torque 850 in-lbs Holding Torque 500 in-lbs. Rotation Reversible Duty Intermittent

US SELLER - We are 100% American Owned company, so our customers get great local customer service.

75,000+ RV PARTS SOLD & 60,000+ QUESTIONS ANSWERED FROM OUR CUSTOMERS - With all of our years of experience, we do everything to help our customers find the right solution. We make sure you have all the answers to your questions from real experts.

Product Name: 1500 RPM DC Geared Motor

Rated Power: DC 12V 40-50mA ( no load )

Shaft Diameter: 4mm/ 0.16inch

8PCS TT DC Gearbox Motor with a gear ratio of 1:48.

Comes with 28AWG wires 2.54mm(0.1”) male connectors, perfect for plugging into a breadboard or terminal blocks.

With EMC, it has strong anti-interference ability and causes no interference to micro-controller.

Package include: 4pcs TT DC Electric Motor, 4pcs plastic tires.

This is a TT DC Gearbox Motor with a gear ratio of 1:48, and each comes with 2 x 200mm wires with breadboard-friendly 2.54mm(0.1") male connectors.

Dimension of the Tire: Outside Φ65mm/2.56"; Width 27mm/1.06".

Replacement Gear Motor for Single Rail Above Floor Slides

Double Shaft

Mid Torque

Gears are re-designed with a stronger and less brittle material which eliminates the main mode of failure

New high quality gaskets are used in every window lift unit which prevents water from entering the unit

All original components are triple-tested to ensure "like new" performance

55pcs colorful gears set, style different colors shaft propellers, can meet your different needs, let you make science and STEM projects much more fun and more choices to fit your experiments

Electric 130 dc motor: silver + red ; voltage: DC 3V-12V; no-load speed: 9000RPM- 25000RPM ±10%; motor body diameter: 27mm/1.06""; shaft size: 10x2.0mm/0.39""x0.08""(L*D); motor body length : 38mm/1.46"".

TT motor robot gear motor operating voltage: 3V~12VDC (recommended operating voltage of about 6 to 8V); Operating Voltage: 3V~6VDC; Batch Number: Double axis 1:48; Load Current: ≤150mA (200mA MAX)

1" diameter straight shaft and 1/2" npt port

1/4" woodruff keyway

More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting products-it's amazing what Buyers Products can do for your truck

Replacement gear motor assembly with pin

Power Gear part number: 523387

Easy, DIY installation

Power Window Motor Gear Kit

Compatible with or fits: (Note: To 5/01/92; Position: Front Left; 1992 Ford F-150) (Position: Front Left; 1981 - 1991, 1996 - 1998 Ford F-150) (Note: To 5/01/92; Position: Front Right; 1992 Ford F-150) (Position: Front Right; 1981 - 1991, 1996 - 1998 Ford F-150)

Power Window Motor Gear

PINION GEAR PULLER. This gear puller is designed for pulling pinion gears off small and medium-sized motors such as rc modeling motors, door lock actuator motor, 3D printer extruder, stepper motors, electric track vehicle...

REBUILD & SAVE MONEY! Sometimes pinion gears wear out before electric motors get broken. Before getting a pricey new motor, try to replace the pinion gears first. That's when this pinion gear puller comes in handy! A money-saver!

THICKNESS. The sliding plate of the gear puller has two ends of different thickness. So it can be more likely inserted into the gap between the pinion gears and the top of the motor. A must-have RC tool!

Is your gear stick seized in position, or maybe it won't return to neutral? Stiff to change gear? Difficult to find gears? Gear change vague and unable to select correct gear?

THE CAUSE: The likely cause of the faults noted above and most common cause is a worn pivot on the gear turret. On the gear turret is a pivot point (illustrated above in Red) a pivot pin operates through a nylon sleeve; this is a poor design and the nylon breaks down over time causing the symptoms noted above. A small amount of play in this pivot translates to problems selecting gears.

VEHICLES AFFECTED: Saab 9-3 Sport 2002 onwards (6 speed manual) Associated part numbers: 55556311, 55354731

Quality Products From TURKEY

Close Customer Relations

Fast Handling

Easy & Smooth Operation: Exceptionally smooth operation is delivered, To shift into forward and reverse, rotate the control lever downward, further rotated downward, the throttle opens.

High Performance: The side mount outboard control designed for more positive shifting and smoother throttle operation.

Easy to Use: The side mount outboard control is easy to install and use. Enabling right or left-hand installation along with a new thumb operated trim switch.

Replacement Motor Service Kit

For use in replacement parts only

Used in Leveling

▶With this universal 4 door car central locking kit, you can convert manual door locks into automatic door locks. Including all mounting hardware and wiring harnesses, it will solve the problem of your

▶car have no central locking or existing system is broken and give you a total new feel to locking and unlocking your vehicle,easy to install and operate.

▶Compatible with remote security lock/unlock outputs ,High torque and strong electromotor ,Using plug/socket compatible with alarm system

Specs: Unit Type: Traction/Drive Motor, Voltage: 36, Dimension: Number Of Fields: 4; Field Type: Series; Terminal Size (4): 5/16-18; Note: (4) 1/4-20 Mounting Holes

Replaces OEM Numbers: ADVANCED MOTORS: BD4-4001, ARROWHEAD: GCM0001, EZ-GO: 73124G03, GENERAL ELECTRIC: 5BC48JB1061, D297, J & N: 430-22139

1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement.

4pcs plastic tires with tread pattern, wheels material: plastic,tire diameter: 2.75""/69mm,tire width: 1.18''/29mm

TT motor operating voltage: 3V~12V DC (recommended operating voltage of about 6 to 8V) with 2×200mm wires; Maximum torque: 800gf cm min (when it is 3V) ;No-load speed: 1:48 RPM:200(when it is 4.5V); Load current: 170mA (when it is 4.5V)

Mini Electric Motor is a general purpose motor, work with batteries or solar cells perfectly Great replacement for the rusty or damaged DC gear motor on the machine

Part Number: DE2-4007 EV6-4001 73445-G02 73124-G08 L75-1057R 73124-G01 20377-G11 170-505-0001 L75-1018R ZQS36-3.0C-T A95-4005B 5BC58JBS6132A 5BC58JBS6259 D294 L75-1024RNA

Replace for Yamaha 170-505-0001 for Luna L75-1057R L75-1018R for YACO ZQS36-3.0C-T

Application Models: Compatible with 2000-UP EZGO TXT PDS DCS KDS Golf Cart with ZQS36-3.0C-T Motor for Yamaha G9 G14 G16

🚙【Fitment】: SCX24 030 55T brush RC motor with Carbon upgrades for Horizon Axial. 🚙for models ✨#AXI90081 ( T1, T2 ); ✨#AXI00001 ( T1, T2 ); ✨#AXI00002 ( T1, T2 ); ✨#AXI00005 ( T1, T2 ); ✨#AXI00006 ( T1, T2, T3 ).Replacement part for AXI31619.

🔥【Package】The all-inclusive kit contains 1 piece 030 size carbon brushed motor 55 Turns; 1 pc 11 teeth steel pinion gear.

🔥【Highlights】High tork, with upgraded carbon brush craftsmanship, the RC motor are faster than the metal brush.