Best Automotive Replacement Gear Kit Motors in 2026

This item is designed to fit specific vehicles

package weight :8.0lbs

Product type :AUTO PART

(2) Actuators

(2) 6.75" Mounting Straps

(2) 8.5" Connecting Rods

【ALL-METAL GEARS】: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.

【PURE COPPER WIRE CORE ROTOR】: With precision winding technology, the geared motor power instant increased by 30%.

【D SHAPED OUTPUT SHAFT】: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.

Compatible Maintenance - 18:1 ratio metal stripped gear fits for V Lippert Tuson Venture. Small teeth count 85 and diameter is 2 1/4”. Larger teeth count 25 and diameter is 1 1/8”. Height of gear when laying flat on a table is 15/16”.

Slide Out Motor Repair - 18:1 ratio metal gear to repair your stripped RV slide out motor. Save money, no need to buy a new motor. New gear can effectively solve the original actuator breakdown issue, restore the system function.

Durable Metal Gear - Made of sturdy metal instead of plastic gears. More sturdy and durable, with long service life. Directly match the factory quality. Every part has been checked for high quality replace part.

“B" Linkage Gearbox.Fit Type: Universal Fit

Replacement kit for 28/31/37/39 Step Series; Step is not included with this repair kit

This replacement kit contains an IMGL (integrated motor/gear box/linkage assembly, a Control Unit, four-way pigtail, and fastener kit.

FITMENT: Compatible with FX35 2004-2006, FX45 2003-2008, Q45 2002-2005, Murano 2003-2007.

Functions: The driver's or passenger's power seat may not be able to move correctly or make noise, these old gears may be worn or damaged. HERCOO‘s new seat adjustment track rail gear repair kit make your seat move back and forth perfectly.

High Quality and Cost-effective: The power seat track rail drive gear motor repair kit is made of sturdy POM material to prevent premature wear and breakage, it is built to long lasting durability. Save your lots of money and time by replacing this gear rather than replacing the whole system.

550 12V 30000RPM Drive Engine

550 drive engine is made of high strength plastic board combined with high quality motor

Please make sure that the purchased parts have the same appearance as the original,Buyers can learn the model number from the motor

East Lake Marine Electric is located in Oldsmar, FL.

Compatible to use on Lippert Slide out & Leveling systems

Compatible with Lippert #167576, 414018 & Bosch #F000MM0809

Club Car Golf Cart Motor - 36/48 Volt Golf Cart Motor - ONLY Series golf carts - Stock 10 Tooth spline - 24 mph & 15% Less Torque versus a stock Golf Cart Motor. (Club Car Electric Motor)

This motor is an economical way to get some more speed as long as you do not mind losing torque. Perfect for flat on-road environment with minimal hills and no backseat or bed. May require controller upgrade. (Club Car Electric Motor)

Replaces the following OEM numbers: 1012191, 1018134-01, 1017857-04, 101785704, 5BC48JB764, D00-4008A, D00-4008, D379 , 5BC48JB844

High speed Tuson landing gear motor for fifth-wheel RVs

Motor only no other parts included

For use on Lippert power landing gear assemblies

MOTOR’S SPECIFICATIONS - Part Number: 368417, 1010000010, 1510000006, RV Slide Out Motor Dual Shaft, 12V DC Motor, Speed 9 RPM @ 850 in-lbs, 17 Amps 12 RPM @ 400 in-lbs, 9.5 Amps 14 RPM (no load) Voltage 12 DC Torque 850 in-lbs Holding Torque 500 in-lbs. Rotation Reversible Duty Intermittent

US SELLER - We are 100% American Owned company, so our customers get great local customer service.

75,000+ RV PARTS SOLD & 60,000+ QUESTIONS ANSWERED FROM OUR CUSTOMERS - With all of our years of experience, we do everything to help our customers find the right solution. We make sure you have all the answers to your questions from real experts.

Product Name: 1500 RPM DC Geared Motor

Rated Power: DC 12V 40-50mA ( no load )

Shaft Diameter: 4mm/ 0.16inch

Replacement Gear Motor for Single Rail Above Floor Slides

Double Shaft

Mid Torque

1" diameter straight shaft and 1/2" npt port

1/4" woodruff keyway

More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting products-it's amazing what Buyers Products can do for your truck

Replacement gear motor assembly with pin

Power Gear part number: 523387

Easy, DIY installation

Is your gear stick seized in position, or maybe it won't return to neutral? Stiff to change gear? Difficult to find gears? Gear change vague and unable to select correct gear?

THE CAUSE: The likely cause of the faults noted above and most common cause is a worn pivot on the gear turret. On the gear turret is a pivot point (illustrated above in Red) a pivot pin operates through a nylon sleeve; this is a poor design and the nylon breaks down over time causing the symptoms noted above. A small amount of play in this pivot translates to problems selecting gears.

VEHICLES AFFECTED: Saab 9-3 Sport 2002 onwards (6 speed manual) Associated part numbers: 55556311, 55354731

Quality Products From TURKEY

Close Customer Relations

Fast Handling

Replacement Motor Service Kit

For use in replacement parts only

Used in Leveling

Specs: Unit Type: Traction/Drive Motor, Voltage: 36, Dimension: Number Of Fields: 4; Field Type: Series; Terminal Size (4): 5/16-18; Note: (4) 1/4-20 Mounting Holes

Replaces OEM Numbers: ADVANCED MOTORS: BD4-4001, ARROWHEAD: GCM0001, EZ-GO: 73124G03, GENERAL ELECTRIC: 5BC48JB1061, D297, J & N: 430-22139

1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement.

Part Number: DE2-4007 EV6-4001 73445-G02 73124-G08 L75-1057R 73124-G01 20377-G11 170-505-0001 L75-1018R ZQS36-3.0C-T A95-4005B 5BC58JBS6132A 5BC58JBS6259 D294 L75-1024RNA

Replace for Yamaha 170-505-0001 for Luna L75-1057R L75-1018R for YACO ZQS36-3.0C-T

Application Models: Compatible with 2000-UP EZGO TXT PDS DCS KDS Golf Cart with ZQS36-3.0C-T Motor for Yamaha G9 G14 G16

No-load Speed: 100RPM at 12 Volts

Torque: 2 kg.cm

Power: 7.2W

【Applicable Model】Steering Motor Gear Damper is a replacement for Avalaon Camery C‑hr Corolla Prius, replacement for ES350 ES300H RX350 RX350L RX450H RX450HL UX250J UX200. It is very suitable with your car, please confirm your model before you buying.

【Premium Materials】The electric power steering motor shaft is made of high-quality ABS material, which has higher wear resistance, is not easy to break, is strong and durable, and has a long service life.

【Superior Performance】Adopt professional design process, manufacture according to standard specifications, exquisite workmanship, high precision, stable performance and high reliability. Professional manufacturing, exquisite workmanship, high accuracy, stable performance and high reliability.

【OE Number】The OE number of damper electric power steering motor shaft is 48254‑28040, according to original standard.It is manufactured by OE manufacturers in accordance with strict OE specifications and has been factory tested.

【Wide Application】Steering motor gear is replacement for Avalaon Camery C‑hr Corolla Prius, replacement for ES350 ES300H RX350 RX350L RX450H RX450HL UX250J UX200.It is specially manufactured with precision, please confirm whether it is suitable for your vehicle before placing an order.

【Excellent Performance】Damper Electric Power Steering Motor Shaft is professionally manufactured with exquisite workmanship, high precision, stable performance and high reliability.

【Practical and Reliable】10 Tooth Sprocket,Our 9 teeth 11 teeth motor gear kit delivers practical and reliable performance, providing users with complete gear accessories and ensuring optimal compatibility with a wide range of applications.

【Simple Installation】Reduction Motor Pinion,Our gear fittings are effortless to install, operate, and learn. However, we recommend verifying the model and size before ordering to ensure accurate selection of the appropriate part.

【Durable Carbon Steel Material】Gears Sprocket,Constructed from durable carbon steel material, our gear accessories exhibit exceptional strength and longevity, ensuring they are resistant to damage and won't require frequent replacement.

High-quality Manufacturing: The new after-sales market sunroof gear has high-quality functions, which is an important part of the vehicle sunroof operation

Product Specifications: The motor gear repair kit's 19 tooth / outer diameter is 17mm / 0.7 inches. The inner diameter is 6.5 * 8mm / 0.2 * 0.3 inches. Strong corrosion resistance, less wear and long -term service life

High-quality Stainless Steel: The Sunroof Motor Gear is made of high-strength stainless steel materials. This skylight motion gear has anti-corrosion, anti-raid, wear resistance, durable, strong strength, wear resistance and lasting time

Size - Modulus: 0.3; Outer Diameter: 4mm Gear Shaft, 9.5mm Gear Wheel; Inner Diameter: 0.98mm Gear Shaft, 4mm Gear Wheel; Gear Thickness: 5.6mm / 0.22"; Direction of Rotation: Right, Reduction rate: 30 : 1, Z1=1.

Material - The set is made of brass material, not easy to wear and tear, durable, and can last for a long time.

Feature - The gear wheel shaft set is compact, small volume, and light weight, it is easy to install and use, and the transmission process is smooth.