Best Dkky Dkky Racing in 2026

High quality material: Made of high-quality plastic, manufactured by high-precision mold injection molding, with exquisite workmanship.

Adjustable light mount: It supports both flat bracket installation and pipe frame round rod bracket installation. The angle of the lamp frame is adjustable, and the standard 5050 large-size high-brightness LED lamp beads provide super-bright lighting effects.

2 ways to control: Standard 2.54 JR connector, can be powered by receiver or BEC, (Equipped with CH3 lighting control module, which can realize lighting effects such as switch, breathing, flashing, etc.(with control))support voltage 5-8V, can work directly in 2S LIPO environment.

1. Made of high-quality plastic, manufactured by high-precision mold injection molding, with exquisite workmanship.

2.It supports both flat bracket installation and pipe frame round rod bracket installation. The angle of the lamp frame is adjustable, and the standard 5050 large-size high-brightness LED lamp beads provide super-bright lighting effects.

3.Standard 2.54 JR connector, can be powered by receiver or BEC, support voltage 5-8V, can work directly in 2S LIPO environment.

100% new and high quality, made of Plastic.

High level of simulation, lightweight and durable.

The Plastic ladder is lightweight.Features a limiting chain so it doesn't split.

🚗 1.2 lithium batteries or 6 nickel hydrogen: 280, 370 or 380 size motor RPM is lower than 30000@7.2V

🚗 2.3-cell lithium battery or 9-cell Ni-MH: 280, 370 or 380 size motor RPM is lower than 20000@7.2V

🚗【Suitable for】: Suitable for 1/16 1/18 1/24 etc RC Model Cars Tracked Tanks Boats Short Trucks RC Car；Also suitable for MN86K MN86KS MN86 MN86S MN90 MN90K MN91 MN91K MN45 MN45K MN99 MN96 MN99S modification； Also suitable for WPL B14 B14K B16 B16K B24 B24K B36 B36K C14 C14K C24 C24K C34 C34K C-34 KM modificatio

It Supports Contact Switch Control On The Control Board And Ch3 Channel Control Of The Remote Controller

It Has Constant Light, Breathing Flash, Explosion Flash, Remote Opening And Closing, And It Is Constant Light By Default When Powered On.

Double Row Lamp Beads Are Adopted, With High Brightness And Power Supply Range Of 5-8.4v

❄【Strong and Durable】: This Heatsink are made of high-quality aluminum alloy and plastic material, wear resistant, durable and long service life. High performance and fine workmen.

❄【RGB Led Light】: Especially design heatsink and Cooling fan can power supply over receiver, convenience and easy to use. Moreover,that heat sink having RGB led light that unique design.

❄【Compatible Models】: 42mm Diameter RC Motor Heatsink for 1/8 scale, 1/10scale RC Car and fit 3010/4010 Size Brushless / Brushed Electric Motor Engine, Compatible with Most Traxxas, Redcat Racing, HPI, Tamiya Models with 3010/1040 size Electric Motors.

❄【Strong and Durable】: This Heatsink are made of high-quality aluminum alloy and plastic material, wear resistant, durable and long service life. High performance and fine workmen.

❄【RGB Led Light】: Especially design heatsink and Cooling fan can power supply over receiver, convenience and easy to use. Moreover,that heat sink having RGB led light that unique design.

❄【Compatible Models】: 42mm Diameter RC Motor Heatsink for 1/8 scale, 1/10scale RC Car and fit 3010/4010 Size Brushless / Brushed Electric Motor Engine, Compatible with Most Traxxas, Redcat Racing, HPI, Tamiya Models with 3010/1040 size Electric Motors.

【Power supply 6-8.4v】: Power supply voltage: 6-8.4v, It can be powered by the equipped 2S and 3S lipo balance head, with a circuit breaker, which can be closed when not in use.

【High Speed Cooling Fan】: This 4WD SLEDGE Sled RC motor cooling fan heat sink with 21000 RPM designed for 1/8 scale RC car, to meet the cooling needs of your RC car.

【Durable&Lightweight】: DKKY RC Cooling fan are made of aluminum alloy CNC machining and the aluminum-plastic integrated design makes the motor cooling fan more durable.

【Power supply 6-8.4v】: Power supply voltage: 6-8.4v, It can be powered by the equipped 2S and 3S lipo balance head, with a circuit breaker, which can be closed when not in use.

【High Speed Cooling Fan】: This 4WD SLEDGE Sled RC motor cooling fan heat sink with 21000 RPM designed for 1/8 scale RC car, to meet the cooling needs of your RC car.

【Durable&Lightweight】: DKKY RC Cooling fan are made of aluminum alloy CNC machining and the aluminum-plastic integrated design makes the motor cooling fan more durable.

It is made of high-quality aluminum alloy CNC machining,exquisite workmanship.

Equipped with adjustable dual mounts, the adjustable range is 40-43MM, and the applicability is high.

It adopts 4010 dual ball high-speed fan, the speed can reach 15000 rpm, and it is equipped with a protective cover. Power supply 5-8.4V, JR plug can take power directly from the receiver.

1. It is made of high-quality aluminum alloy CNC machining,exquisite workmanship.

2.Equipped with adjustable dual mounts, the adjustable range is 36-38MM, and the applicability is high.

3. It adopts 3010 dual ball high-speed fan, the speed can reach 25000 rpm, and it is equipped with a protective cover. Power supply 5-8.4V, JR plug can take power directly from the receiver.

【Power supply 8-12V】: Power supply voltage: 8-12v.It can be powered by the equipped 2S and 3S lipo balance head, with a circuit breaker, which can be closed when not in use.

【High Speed Cooling Fan】: This 4WD SLEDGE Sled RC motor cooling fan heat sink with high speed up to 21000 RPM designed for 1/8 scale RC car, to meet the cooling needs of your RC car.

【Durable&Lightweight】: DKKY RC Cooling fan are made of aluminum alloy CNC machining and the aluminum-plastic integrated design makes the motor cooling fan more durable.

1.It's made of soft LED color light strip and equipped with light control module.

2.It can be controlled by CH3 and manual keys. The control module can remember the used mode by itself without resetting after power failure.

3.With on and off, constant light, slow flashing, fast flashing, double flashing, breathing flashing and other modes.

❄【Prevent Motor From Overheating】 The speed can reach up to 225000RPM, excellent heat dissipation effect to protect the motor, fast cooling, light weight, easy to carry.

❄【Exquisite Workmanship】 Made of high quality material, exquisite workmanship make this cooling fan is durable for long term use.

❄【Easy to Install】 Esc cooling fan compatible with all brackets with 24mm mounting holes.Fix and install with flat head M3 screws.JST head connection is convenient and fast, easy to install, easy to use, the wiring has positive and negative poles, the wrong connection will not work .

1.CNC machining and anodizing, beautiful appearance.

2.Aluminum gearbox housing, hardened steel internal and motor gears.

3.Helps prevent dirt and debris from entering the pinion and spur gears for a quiet and efficient drivetrain.

【High Quality Matetial】: Made of Aluminum alloy CNC processing RC front and rear axle kit with anodized and hardened surface, steel spiral gear, excellent quality.

【Best Stability】：This high simulation appearance front and rear set with slope axle egg, excellent trafficability, Novel appearance and exquisite workmanship, Servo structure on the axle (steering force is more stable).

【Large Steering Integrated】: The upgrades rc front axle comes with 45 ° Large Steering, 8 ° inclination, Steel internal gears and driveshaft,gear ratio:8T/30T.

🔊【SFC technology】: The engine sound simulator system adopt advanced and SFC technology, which makes sounds more real.

🔊【Support aux channel】: Support aux channel, can simulate a variety of auxiliary sound. Also can simulate kinds of alarm horn sound and support 4S Lipo.

🔊【A variety of sound waves to choose from】: The system up to 10 built-in engine sounds, 5 built-in alarm sounds,switch freely with different engine.

1.Using high-quality aluminum alloy CNC machining, strong and durable.

2.Upgrading the vulnerable plastic parts #7532 7552 of the original car to allow the car to obtain better performance.

3.Installed in the fixing holes of the original car, simple and non-destructive installation.

【Durable Material】: This Cooling fan heat sink is formed of high-quality aluminum alloy, CNC machining, beautiful and durable, good thermal conductivity;

【High Speed Cooling Fan】: The High Speed 4028 cooling fan has super strong wind and the rotation speed can reach 21000 rpm, which makes it have excellent heat dissipation effect;

【Power supply 8-12V】: This Cooling Fan Heat sink Power supply 8-12V,It can be powered by the equipped 2S and 3S lipo balance connector, with a circuit breaker, which can be closed when not in use. When the power supply is 12V, the power supply current is 1A;

【Durable Material】: This Cooling fan heat sink is formed of high-quality aluminum alloy, CNC machining, beautiful and durable, good thermal conductivity;

【High Speed Cooling Fan】: The High Speed 4028 cooling fan has super strong wind and the rotation speed can reach 21000 rpm, which makes it have excellent heat dissipation effect;

【Power supply 8-12V】: This Cooling Fan Heat sink Power supply 8-12V,It can be powered by the equipped 2S and 3S lipo balance connector, with a circuit breaker, which can be closed when not in use. When the power supply is 12V, the power supply current is 1A;

🚗This is a Rc Shock Pliers Multifunction Aluminum Alloy Shock Absorber Clamp Shock Absorber Assembly Disassembly Rc Tool for 1/10 1/8 Traxxas Arrma Axial Losi Redcat HSP HPI RC Cars Trucks Rock Crawlers ,Package includes:multifunctional pliers * 1.

🚗【Made Of High-Quality Aluminum Alloy】：RC Shock Pliers Be made of high-quality aluminum alloy, lightweight, and durable with double color treatment on the surface, novel and beautiful appearance, integrated welding, measurement and other functions.

🚗【RC Multi Functional Common Tools】: Maintenance Pliers Ball End Tool for rc car shock shaft pliers and Dismounting Screw Clamp Screw Plug Welding Clamp Shock Clip. The multi-purpose pliers can hold shock shafts firmly and can fix the plugs when soldering.Which can be used to repair vehicles, assemble shock absorbers and repair or disassemble tools.

Package include 2*RC Motor ESC Electric Speed Controller,1*User Manual

Support 2-3S LIPO or 4-9 NIMH batteries 6-12.4V.

Suitable for rc car models such as 1/16 1/18 1/24.

1.The motor mount is made of high-quality 7075 material and processed by CNC,exquisite and durable ,can effectively ensure the stability of the motor at high speed;

2.Convenient and quick release motor base design to effectively prevent the displacement of the motor;

3.Suitable for 1/8 Sledge Monster Truck 95076-4;

1.Using high-quality aluminum alloy CNC machining, strong and durable.

2.Upgrading the vulnerable plastic parts of the original car to allow the car to obtain better performance.

3.Installed in the fixing holes of the original car, simple and non-destructive installation.

🚗【 SUITABLE FOR】：This gear box is designed for Axial SCX10, SCX10 II 90046 90047 90016 90021 90022 900281/10 RC Crawler Car, etc It's complete alloy gear box.

🚗【 ADVANTAGE】:1/10 Ratio Metal Gear Transmission and Motor Base, Excellent Performance,Mini gear box is small and light,Upgraded metal gearbox, good stability,High performance, easy to replace

🚗【NEW UPGRADES RC ACCESSORIES】: With Front Aluminum Protection Cover.Exquisite workmanship, smooth and durable It's complete straight gear alloy gear box.

🚗 【Material of Wheel and Tire Set】: This is a 1.9 Inch RC Crawler Nylon Plastic Wheel 4.65in/118MM Tire with 12MM Combiner Accessory. The Package Includes Tire Skin*4, Wheel Hub*4, Mounting Screws*1 Package (Screws Not Assembled)

🚗【Wdely Cmpatible 】: Suitable for TRX4, Axial SCX10 90047 SCX10 II 90046 SCX10 III AXI03007, Redcat Gen 8 and mostly 1/10 RC Crawler Car Truck which have 12mm Hex Hubs.

🚗【Product Size】: 1.9 Tire OD (Height): 4.66"" (118mm) | Width: 1.77"" (45mm) | Wheel Hex Size: 12mm.

1. It is made of high-quality aluminum alloy, solid and durable.

2. Accurate data and can replace the plastic parts of the original vehicle without damage.

3. The multi-hole design can adjust the angle of the shock absorber.

1. The tires are made of high-quality soft rubber, and the wheels are made of high-quality aluminum alloy. The workmanship is exquisite, sturdy and durable.

2. Easy to install, fixed with 4 screws on the back, and multi-color options provide a better visual upgrade for your model car.

3. Multi-track tires and aluminum alloy wheels can effectively reduce the center of gravity and provide more grip for your model car.

【Durable Material】: This Cooling fan heat sink is formed of high-quality aluminum alloy, CNC machining, beautiful and durable, good thermal conductivity;

【Dual Cooling Fan】: The 4010 double cooling fan has super strong wind and the rotation speed can reach 15000 rpm, which makes it have excellent heat dissipation effect;

【Power supply 5-8.4V】: This Dual Cooling Fan Heat sink Power supply voltage: 5-8.4v. It can be powered by the equipped 2S lipo balance connector, with a circuit breaker, which can be closed when not in use;

【Durable Material】: This Cooling fan heat sink is formed of high-quality aluminum alloy, CNC machining, beautiful and durable, good thermal conductivity;

【Dual Cooling Fan】: The 4010 double cooling fan has super strong wind and the rotation speed can reach 15000 rpm, which makes it have excellent heat dissipation effect;

【Power supply 5-8.4V】: This Dual Cooling Fan Heat sink Power supply voltage: 5-8.4v. It can be powered by the equipped 2S lipo balance connector, with a circuit breaker, which can be closed when not in use;