Best Traxxas Rc Vehicle Lighting in 2025

Material: durable hard plastic and metal.

LED size: 5mm (white LED), and 3mm (red LED).

Suitable for all kinds of RC car truck tank.

Traxxas 6795 - LED Light Kit, Rustler 4x4

Features: Efficient, high-intensity LED lighting Front bumper with integrated LED lights Roof skid with integrated front (white) and rear (red) light bars Regulated power supply for stable lighting performance Easy installation with included power tap connector Mounting hardware

Includes: (1) LED Lights/Light Harness (4 clear, 4 red) (1) Front Bumper (1) Rear Bumper

Traxxas 8087 - LED Lightbar for TRX-4, Roof Lights, Requires 8028

Features: Multi LED Lightbar with Wiring Harness, Mounting hardware, Fits # 8111 Body

Includes: (1) LED Lightbar (1) Wiring Harness (2) Cap Head Screws

Fit For: This LED light set is suitable for 1:10 rc touring car.

Constantly Bright: The light is always on, it is powered directly from the receiver, and it can be lit by plugging it into the receiver.

Controllable: The light is controllable, you can achieve it by purchasing an switch controller.

Traxxas 6591 - Pro Scale Advanced Lighting Control System, TRX-4

Features: Day / Low / High modes Smart brake lights Reverse lights Hazards Turn signals Crawl setting

Includes: (1) Pro Scale lighting power module (1) Pro Scale lighting distribution block (1) Power module mount (1) Motor sensors wire harrness (1) MAXX link cable (1) Receiver communication cable Installation hardware

1. Made of high-quality plastic, manufactured by high-precision mold injection molding, with exquisite workmanship.

2.It supports both flat bracket installation and pipe frame round rod bracket installation. The angle of the lamp frame is adjustable, and the standard 5050 large-size high-brightness LED lamp beads provide super-bright lighting effects.

3.Standard 2.54 JR connector, can be powered by receiver or BEC, support voltage 5-8V, can work directly in 2S LIPO environment.

Traxxas 8086 - LED Expedition Rack Scene Light Kit, TRX-4

Features: Multi LED Lightbar with Wiring Harness, Mounting hardware, Fits # 8111 Body

Includes: (1) LED Lightbar (1) Wiring Harness (1) Plastic Tie Wrap (8) Cap Head Screws

RC CH3 Controling flashing Mode.

Using receiver as power supply.

This RC light bar with strobing-blasting Flashing fast-slow Flashing alternately Mode and so on

For sale is high quality 8-LEDs RC LED Light Kit.

Includes 8pcs LEDs: 4pcs White LEDs + 4pcs Red LEDs

LED size: 5mm (white LED), 5mm (red LED)

For sale is high quality 4-LEDs RC LED Light Kit.Compatible with Traxxas AE Losi Axial Tamiya HPI,HSP most top brands 1/10 1/12 1/16 RC vehicle and others rc car,truck.Also,they can used on rc drone,plane,boat,helicopter,tank etc.

This LED set includes 4pcs LEDs,2 white LEDs + 2 Red Lights

LED size: 3mm (Red/White LED)

Compatible with the Rustler, Rustler 4x4, Bandit, Nitro Rustler, Jato & More. Will work on many 1/10 Scale rock crawlers, trucks, stadium trucks, buggys

70mm Long - Mounting at 59mm or 74mm with the mounting feet facing in or out (see last picture) Please measure where you plan on mounting it to make sure it will fit

28 super bright led lights - great for running at night, or in poorly lit areas. Can be mounted on the roof for a truck scale appearance, or on the hood to be better protected during rollovers. Includes 4 screws and bolts to securely mount the light bar to the body

4 LED Lights Kit 2 PCS White Headlamps 2 PCS Red Taillamps for 1/10 1/8 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Car

Directly powered by the receiver, no separate battery required, for convenient to operate.

Material: Plastic & Metal

light voltage: 4.8V-7.4V

100% brand new and high quality

Suitable for 1/10 1/8 RC car, Rally car, Monster truck, Short-course truck, CC01 D90 SCX10 crawler car and so on.

Super bright DIY RC light bar accessories for 1/10 1/8 Scale truck

Powered by receiver (May need JST Y Cable); don't connect with batteries directly

Working voltage: 5V-7.4V; 36pcs LED bright lights; Cable length:16.9 in.

▶ Suitable for 1/10 scale RC car models, such as Yokomo Tamiya HSP HPI AXIAL RC4WD

▶ Super bright flashing bar, this RC simulation flash lights will make your car more cool and attractive

▶ Advanced design of circuit board, HOSI power saving

Warm note : Do NOT power by battery directly

With 12leds, enjoy driving your crawler at darkness night

Upgrade Light Bar with hardware, easy to mount on

High quality and cheap price.

Flashing fast-slow Flashing alternately Mode.

Strobing-blasting Flashing Mode.

Direct remote control three-channel control. Designed perfectly for Traxxas TRX-4 Axial SCX10 RC4WD 1/10 RC Rock Crawler Car

The outer diameter of the headlight is 19 mm, and the outer ring is protected by super thick silicone sleeve ring.

Cold white light source in inner ring and color light in outer ring, highly simulated.

Remote control model car, Universal headlights, headlight conversion DIY toy car. Bright LED light output. Halo style bulb. Bright colors.

2 lighting options. Lighting switch. Pre-Wired. 4.2v-6v input.

Middle Light Diameter: 10mm. Outer diameter: about 17mm. Cord length: about 50cm

Compatible With the Traxxas 1/18 Teton, 1/16 Summit, 1/16 E-Revo, Redcat 1/18 Volcano, 1/10 Tornado S30 Buggy, ECX 1/18 Temper, 1/18 Ruckus, 1/10 AMP Desert Buggy & 1/10 Boost Buggy. Will work on many 1/18-1/16 Scale Vehicles & 1/10 Buggies

55mm Long - Mounting at 43mm or 58mm with the mounting feet facing in or out (see last picture) Please measure where you plan on mounting it to make sure it will fit

3 SUPER BRIGHT LED LIGHTS - Great for running at night, or in poorly lit areas. Can be mounted on the roof for a truck scale appearance, or on the hood to be better protected during rollovers. Includes 4 screws and bolts to securely mount the light bar to the body

✔LED light color: 4 white LEDs and 4 red LEDs, Super bright

✔LED size: 5mm (white LED), 5mm (red LED)

✔Easy to install on rc car body shell, Directly powered by the receiver, for convenient to operate

【20 Light Modes】With 20 kinds of light modes, with high brightness, vibrant colors, can switch by remote control. 20 light modes: white light, red light, blue light, green light, pink, strobe, 7-color strobe, marquee, etc.

【Supplied directly from receiver】The input voltage is 5V-8V and can be supplied directly from the receiver. The light with strong impact resistance can be work in water for more than 60 minutes, if your car drives in water, no need to worry.

【Drive at Night】With lights for decoration, your car can drive at night, irradiation range above 50cm, making your remote control car cool attractive and more playable

Traxxas 7884 - Front LED Light Bar, 82mm, Double Row, High Voltage, X-Maxx

Features:

Includes: (1) LED Light Bar (2) Mounting Screws

Note:Please make sure that the remote controller have a CH3 function button.Otherwise it does not work.

Compatible with HSP Traxxas CC01 Axial SCX10 1/10 1/8 rc car truck .Could work for 12 pieces 5mm led lights.

Method of use: Connect the JR connector to the receiver third channel(CH3), switch the controller CH3 switch swiftly twice or once and the flashing mode will change.

It Supports Contact Switch Control On The Control Board And Ch3 Channel Control Of The Remote Controller

It Has Constant Light, Breathing Flash, Explosion Flash, Remote Opening And Closing, And It Is Constant Light By Default When Powered On.

Double Row Lamp Beads Are Adopted, With High Brightness And Power Supply Range Of 5-8.4v

Official Traxxas LED Kit Designed for the UDR

Ultra-Scale Looks and Performance

Bolts right onto a Traxxas Unlimited Desert Racer!

2 kinds styles are optional, White light, high brightness

Come with 2 kinds light bracket, can move and fold

Run at a maximum of 7.4V, so they can be powered directly from your receiver

6 Super Bright LED Lamps.

Voltage 4.8V-7.4V.

Simple installation, make your car really beautiful.

comingsoon, mpn_9290, status_Current, TRX_PART

1.Compatible with Traxxas TRX-4 Axial SCX10 II 90046 90048 RC4WD D90 D110 CC01 KM2 1/10 RC climbing car crawler car truck; great for running at night or in low light areas. Super bright lighting with stable performance. Make your RC car more cool and attractive.

2.RC car led light emitting diodes are made of high quality metal and plastic, durable to use.

3.Working Voltage: 12V. Maximum Current Limit: 20mA. These pre-wired LED beads can be used in automobiles, motorcycles, signal flasher, toy cars, remote control aircraft, model flasher, and other luminous beads that require product function indicator.