Best Drisentri in 2026

Using overcurrent protection device, durable, firm and has a long service life.

The PCB bottom plate is made of fire-resistant sheet, which is clear and clean. The corners of the line are rounded, and the thick copper layer withstands large currents.

Capacitance is the key to divider performance. Treble uses the famous German non-inductive 100V1.5U two capacitors in parallel, overcurrent protection, etc., to ensure its super load capacity and long-term durability and nice sound.

Material: Made of high quality ABS + copper materials, the quality is reliable and durable

Stability: With stable performance and high precision, it can be used with confidence

Easy to Install: Perfect installation and high reliability, no special tools, can also be installed easily

Using overcurrent protection device, durable, firm and has a long service life.

The high-volume part adopts the famous German noninductive capacity 100V1.5uf in parallel, and the high power non-polar capacitor, the low frequency part is converted by inductance to achieve a clear and full effect.

The PCB bottom plate is made of fireproof board, which is clear and clean. The corners of the circuit are rounded, and the thick copper layer bears high current.

Old-fashioned Air Horn: This old time car horn is designed in antique style, this unique old style horn brings back good old memories for you, not only protect your safety, but gives you unique using experience.

High Sound Level: The horn voice is loud and clear, can make a powerful sound that is 110dB; When driving in a noisy area, it can trigger an clear cow's vintage horn OO-GA! OO-GA! Sound.

Easy to Install: Powerful alarm horn siren, easy to install with one button (install 1 bolt + 2 terminals to connect), very convenient to install, which can save your time and energy.

Fine workmanship and sophisticated materials. The design is reasonable, the appearance is exquisite, and the sound is a sharp weapon.

The high-frequency part uses the famous German EPCOS thousand layer cake film non-inductive capacitor, 100V1.5uf in parallel, make more efforts to achieve the purpose of high current and zero loss angle, with very few errors -3% to +3%.

The low-frequency part passes through the inductor to the output port to achieve a clear and full effect. Listening to large-scale symphony and passion style music is quite enjoyable.

Power cord is antioxidant pvc environmental protection material, copper clad aluminum thick core.

Audio cable using pure copper RCA terminals, pure copper core, better signal transmission, better sound.

Control cable made of pure copper, car amplifier interface REM connected to CD/DVD player after the amplifier control line.

Dual protection with imported 25A fuse. High temperature and high pressure protection wire, ceramic lamp holder.

40A waterproof relay and high temperature fuse box, double loop push cabinet filament 100W / 140W connection terminal.

After tin plating treatment, to prevent the occurrence of bad contact, high heat resistant COT bellows are not shaded.

Suitable for the circuits of car kit power amplifier or car kit woofer and other digital speaker.

Made of high density conduct, provides better shielding effects and anti interference effects, deliver less sound dissipation and more vivid voice effect.

Superior PVC cable jacket can be anti wear, stable and durable. Audio cable using pure copper RCA terminals, pure copper core, better signal transmission, better sound.

Gold Plated Screw Terminals

150 Watts RMS/300 Watts Peak

Tweeter Frequency: 3.39~20kHz

Product Name: Crossover Filters Frequency Divider; Color: White,Red,Yellow

Material: Plastic,Metal,Electric Parts; Dimension: 11.5 x 8.5 x 3.2cm/ 4.5 x 3.3 x 1.3 inches(L*W*H)

Package Content: 2 x Crossover Filters Frequency Divider; Rated Power: 180W

Audiopipe CRX-303 300 Watts Crossover 2 PACK DEAL

High Grade Polymer Capacitors

3-Way Passive Crossover Network

400W Ajustable Treble / Bass Frequency Divider Distributor 2-Way Speaker Audio Crossover Filters

Large capacity, reasonable design, beautiful appearance, quality achieve full self control.

Inductance adopts anaerobic copper winding , and pure copper wire.

Brand New & Factory Original!

Large capacity, reasonable design, beautiful appearance, quality achieve full self control.

Inductance adopts anaerobic copper winding , and pure copper wire.

The crossover soprano + available bass binary frequency sound box, can also be used in 2.1 the high small satellite box and automotive loudspeakers.

Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY

Power: 200W (applicable to 4-inch to 8-inch subwoofer).

Speaker Impedance: 4-8 ohms.

2 Pack of 2-Way Crossover

High and Low Frequency Response

Max Power: 500W

2 Pack of 2-Way Crossover

High and Low Frequency Response

Max Power: 600W

400W Ajustable Treble / Bass Frequency Divider Distributor 2-Way Speaker Audio Crossover Filters

Large capacity, reasonable design, beautiful appearance, quality achieve full self control.

Inductance adopts anaerobic copper winding , and pure copper wire.

300 Watts Peak, 3-Way Crossover

High Grade Polymer Capacitors

3-Way Passive Crossover Network, 4-Ohm

3 Way Audio Frequency Divider is a tweeter+mediant+bass three-way KTV, stage professional speaker crossover and DIY upgrade tool which is to improve audio quality

High-quality materials: high temperature resistant wire, wire wound ceramic resistor and imported metal film

Low loss and high quality, no longer have the problem of electrolytic capacitors

Series: HiFI , 2 way 2 Unit (Woofer and Tweeter)

Crossover Frequency: 3200Hz; Maximum Power: 400W; Resistance: 4-16 Ohm

Size:70*57*26 mm / 2.76*2.24*1.02 in

18 gauge inductors are used to keep DC resistance to a minimum

Unique design feature of the low-pass section allows for use of 4 or 8 ohm woofers

All components are glued or fastened down to eliminate buzzing and vibrations

[Good Function] To separate the mixed audio signal into a treble, bass, and then were sent to the corresponding treble, bass speaker unit in playback, resulting in enhance the sound quality purposes. You can also use only bass or treble mode if you want.

[Perfect HiFi Sound Quality] Make the treble clear and increase the intensity of the bass, freely enjoy clear and natural music, speaking, songs of bass or treble.

[High Quality and Super Durability] Wire wound ceramic resistor and high-quality metal film capacitors, ensure its large load power, long-term durability, hard to burnout. Any questions, please contact us immediately for solution. We will work with you to solve any problem you may have.

Model: B-301 (high, medium and low triple divider).

Install diagonal hole 10.2cm, adjacent angle: 6.2cm

Power: 150W. Impedance: 5-8 Euro.

Impedance:4-8Ohm

Power:200W

Frequency Response:45Hz-25Khz

Professional High-quality Crossover：This is a professional frequency divider, which is widely installed in the speaker. Playing an important role of the total frequency signal segmentation. Treble and bass dual frequency support, helps to transmit the treble signal to the tweeter unit, and divide the bass signal into subwoofer unit

Perfect HIFI Sound Quality：Make the treble clear and increase the intensity of the bass, freely enjoy clear and natural music.To separate the mixed audio signal into a treble, bass, and then were sent to the corresponding treble, bass speaker unit in playback, resulting in enhance the sound quality purposes

High Quality and Super Durability: wire wound ceramic resistor and high-quality metal film capacitors, ensure its large load power, long-term durability, never burnout.Large capacity, reasonable design, beautiful appearance, circuit board design with precise cutouts and lines, free for welding, very suitable for DIY

2WAY CROSS OVER

SPEAKER BOX PLUG PLATE

18AWG LEAD WIRES

This is a tweeter+mediant+bass three-way KTV, stage professional speaker crossover and DIY upgrade tool which is to improve audio quality.

High-quality materials: high temperature resistant wire, wire wound ceramic resistor and imported metal film.

High-quality capacitors: low loss and high quality, no longer have the problem of electrolytic capacitors.

Applicable resistance: 4-8Ohm

Filter characteristics: high and low frequency

Maximum : 350W

Dimensions:Length 7 cm,width 5 cm,thickness 2.5 cm

Frequency: not fixed position determined by debugging.

Power: Speakers below 400W are available.