Best Electrocookie in 2026

Useful in transferring breadboarded prototypes to reliable and permanent circuits

Popular breadboard alignment for versatile prototyping purposes

Adaptable with a variety of MCU boards. Compatible with Arduino Nano, ESP8266, NodeMCU, etc.

Useful in transferring prototypes to reliable and permanent circuits

Snaps Into 4 small boards for versatile prototyping purposes

Adaptable with a variety of MCU boards. Compatible with Arduino Nano, ESP8266, NodeMCU, etc.

Miniature Desktop Style Case for Raspberry Pi 4B (Not Compatible with Pi 3)

Matte Black Aluminum Body and Transparent Dark Gray Acrylic Cover

Effective CPU Cooling System with Large Heatsink and 4000rpm Fan

★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out

★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects

★4 mounting holes at the corners of the board are very convenient for installing them together.

400 point and 830 point breadboards are available to meet your various experimental needs.

White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips.

With Self-Adhesive Tape on the Back, Easy to Stick on the Arduino Prototype Shield.

Useful in transferring breadboarded prototypes to reliable and permanent circuits

Popular breadboard alignment for versatile prototyping purposes

Adaptable with a variety of MCU boards. Compatible with Arduino Nano, ESP8266, NodeMCU, etc.

This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place

Breadboard PCB for any type Raspberry Pi GPIO

Gold plated finish prevents oxidation, High quality Gold finish for easy soldering

This product contains five different sizes of circuit boards£¬2*8CM,3*7CM,4*6CM,5*7CM,6*8CM,You also can cut these pc boards into any shape any size, it can meet all your needs.

The boards are all basic green body with soldered holes. Good plating around the holes and a nice variety of sizes for the price.

Package comes with totally 50 pcs prototype circuit blank breadboards that is enough for various electronic and soldering project.

100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering; 0.1" hole spacing for DIP integrated circuits and headers.

THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions

MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use; With pre-tinned plated holes; Double sided board with plated-thru holes allows components to be easily soldered to either side of the board

Useful in transferring prototypes to reliable and permanent circuits

Snaps Into 4 small boards for versatile prototyping purposes

Adaptable with a variety of MCU boards. Compatible with Arduino Nano, ESP8266, NodeMCU, etc.

PCB Board: 30 pieces double sided PCB prototype boards in 4 different sizes, 10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards

Header Connector: 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header; pitch: 2.54mm, single row and straight connector

Screw Terminal Block: 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P ; pitch: 5.08mm, rated voltage: 300V, rated current: 16A

These double side (DS) pcbs with plated through holes design, Each hole on the same side are electrically isolated (NOT a stripboard or sigle side) solderable, You can solder to bridging holes together or use 22-29awg jumper wires for connection. Isolate points bare perfboard.

Lettering on both side of the PC board makes it easier for prototyping projects, Cuttable fiber glass and FR-4 flame resistant good for soldering,Muti Pins, easy to cut and solder with appropriate tools. Flux for easy soldering and extended serving life of printed blank perforated board. Pre-tined plating thru holes

Kits : 20pcs set ( 5pcs 4x6 / 5pcs 3x7 / 5pcs 5x7 / 5pcs 2x8 ) 2*8 3*7 4*6 5*7 CM protoboard | Hole-diameter: 1 mm / 0.04 inches | Hole-pitch point: 2.54mm / 0.1 inches | Conner Mounting-Hole: 2 mm / 0.08 inch | Thickness: 1.6mm / 0.06 inch 5pcs 4 X 6CM double-sided PCB board with 280 holes 5pcs 3 X 7CM double-sided PCB board with 240 holes 5pcs 5 X 7CM double-sided PCB board with 432 holes 5pcs 2 X 8CM double-sided PCB board with 168 holes

The Package comes with 2 pcs double sided pcb prototype board, the proto boards are in the color of Green.

The size of printed circuit board : 9cm X 15cm(3.543" X 5.906"); The weight of one piece universal printed circuit board: 39.0g/1.376oz

The pcb board is double sided, with the plated holes are pre-tinned, the hole diameter of the prototype circuit board is about: 1 mm/0.039", The hole number of printed circuit universal breadboard is: 1836

Selection of Multi-Sized Proto Boards - 31 pieces double-sided prototype boards of 5 different size to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects. （10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm, 5 pieces 5*7cm and 1 pieces 7*9cm PCB boards

Header Connector - 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header; pitch: 2.54mm, single row and straight connector

Screw Terminal Block - 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P ; pitch: 5.08mm, rated voltage: 300V, rated current: 16A.

⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB Boards, Different Size to Meet Your Demands When Designing Your Own Electronic Projects, Electronic Experiments and DIY Projects.

⭐【Convenient for Projects】The upgrate 0.8mm solder wires, Semi-solid Flux, and High Temperature Marine Resistant Products, Providing Most Necessary Mounting Tools. It’s convenient to use.

⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header; Pitch: 2.54mm, Single Row and Straight Connector;

5PCS Solderless Breadboards - 3PCS Full-size and 2 PCS Half-size bread boards to meet your experimental needs.

Solid and Reliable - White ABS Plastic solid body with clear printed labels for rows, columns and buses.

Snugly but Lightly - Snugly enough to hold electronic components in place, but lightly enough to remove them.

Prototype PCB for Arduino UNO R3 Shield Board DIY.

Quantity: a lot of 10 pieces.

PCB Dimension: 68.58mm x 53.34mm / 2.7" x 2.1"

✔️3220 Test Points, 4 Binding Posts, 560 U-shape pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors pure(100%) Copper Jumper Wires Kit

✔️7 Power Lanes, Tie-point 700; 4 Double Strips, Tie-point 2520;

✔️ABS Plastic housing, metal contact clips; Accept wire with diameter 20-29AWG;Black aluminum plate

This Copper Clad Plated Printed Board is desgined For Etch Etching Project.Single Sided (SS) Blank Copper on the Front, FR4 Bakelite on the Back.10 pcs a Pack.

With Small Size 7x10 cm - 2.7" x 4" (W*L), 1.6mm - 0.062" Thickness, Weight in 15g 0.5oz Each.10 pieces epoxy Brown 4 x 2.7 inch

Packed with Moisture Protecting Bag to Prevent Copper Rust. 10pcs Bare Boards Kits Delivered in their Best Conditon.

This Copper Clad Plated Printed Board is desgined For Etch Etching Project.Single Sided (SS) Blank Copper on the Front, Bakelite on the Back.10 pcs a Pack.

With Small Size 7x10 cm - 2.7" x 4" (W*L), 1.6mm - 0.062" Thickness, Weight in 15g 0.5oz Each.10 pieces epoxy Brown 4 x 2.7 inch

Packed with Moisture Protecting Bag to Prevent Copper Rust. 10pcs Bare Boards Kits Delivered in their Best Conditon.

400 Points Breadboard with 2 Positive & Negative Power Lines on both ends.Perfect for Arduino Shield Prototyping and Testing.

Insertion Wire Size is 21 to 26 AWG, 0.016 to 0.028 inches diameter (0.4 to 0.7mm diameter),works with dupont jumper wires kit.

White ABS body with black printed legend. Color legend on distribution strips.

Featuers: 10pcs large breadboard, mb-102 , 830 point prototype breadboard.

Solderless breadboard in breadboard kit is for diy arduino ,and you can use with breadboard jumpers wires and breadboard power supply for toys and games.

Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard kit.

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts

✔️Will Accommodate Up To (18) 14pin DIP ICs, or (15)16 pin DIP ICs.

✔️ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips; Accept Wire With Diameter 20-29AWG;

【Material】 Material: FR-4 Glass Fiber, Copper; Layers: Double-sided.

【Size】Dimension: 100x70mm/ 3.94x2.76 inch(L*W); Thickness : approx. 1.5mm.

【Applications】Great for making PCB Circuit Board, Models. Widely used in product development, DIY experiments, maintenance, production, etc.

【Material】 Material: FR-4 Glass Fiber, Copper; Layers: Double-sided.

【Size】Dimension: 180x120mm/ 7.09x4.72 inch(L*W); Thickness : approx. 1.5mm.

【Applications】Great for making PCB Circuit Board, Models. Widely used in product development, DIY experiments, maintenance, production, etc.

This is an upgrade complete Arduino starter kit designed for beginners and electronic hobbyists.

With more than 33 projects, it is esay and convenient for you to learn Arduino and programming. If you need the guide of the projects, just email us after you getting the mega2560 starter kit..

The starter kit will make a great gift for any to-be engineers, or anyone looking to get a jump start in the world of microcontrollers and programming. Hundreds of tutorials and guides can be found online and the range of projects that can be created with an Arduino is vast

DIY Prototype

PCB Universal Board

High-quality bakelite materials

2 Sets of UNO Proto Shield prototype expansion board with SYB-170 mini breadboard

SYB-170 Mini Breadboard Based for arduino Compatible with UNO R3

The ProtoShield Prototyping Board comes with two LEDs and two pushbutton circuits that are ready to use, with all pins and power supplies present

Product name: Double-sided Copper Clad Laminate PCB Circuit Board 100x70mm 10x7cm 100mmx70mm FR4 1.5MM Thickness DIY PCB Board.

Material: FR4 glass.

Layers: double sided.

32 pieces double-sided prototype boards of 6 different size to meet your demands, for electronic experiments and DIY projects.

Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.

4 mounting holes at the corners of the board are very convenient for installing them together.