Best Elsoon in 2026

Bearing Buddy Fits 1.980 inch hub grease cap bore diameter

Bearing Buddy Cap Permanent protection against water, dirt and road grime

Wheel Bearing Grease Maintains pressure and keeps bearing greased

【Material】Stainless steel extended air duct, copper motor can be durable, high-quality plastic material and rechargeable lithium battery power supply.

【Ergonomic Design】Ergonomic design makes it easier to hold and use. Electric blower is more labor-saving than traditional manual products. Wireless blower is more convenient to use than traditional wired products.

【Stepless Speed Regulation】The wind can be adjusted steplessly through the knob, and it can be used for 2 hours after one charge.

【Adjustable Cutting Angle】The maximum depth of cut at 90°is 51mm and bevel capacity at 45°is 1-1/8in. Perfect for miter cuts, bevels, framing and edging. Angle guide and quick adjustment gives you a huge degree of versatility in your cuts.

【Powerful Cutting Ability】Upgrade pure copper brushless motor deliver up to 3500 RPM for efficient cutting performance. You can use it for cutting wood, PVC pipes, plastics, aluminum and tile.

【Precise Cutting】Design of calibration port for high precision cutting base gives you a better alignment during cutting which ensures precise and straight cutting.

【Specification】Input: 100V-240V 50/60Hz, Output: 21V 2A.

【Fast Charger】A full charge for 1.5Ah batteries in 15 minutes, 3.0Ah battery in 30 minutes, 5.0Ah battery needs only 45 minutes.

【Multiple Protection】Our Li-ion battery charger built-in charger diagnostic program checks batteries with every charge, features quick charging and a LED indicator to display charging status: charged, charging, battery too hot or too cold.

【High-Efficiency Brushless Motor】Cordless impact wrench equipped with a high-efficiency brushless motors, the operation becomes more stable and stable. Tool speed can increase by increasing the pressure on the switch trigger. The maximum torque of the impact wrench can reach 310ft-lbs (420N·m) and max 3100 RPM speed, allowing you to tighten or loosen various nuts and bolts easily which saves your time and energy. Providing you with a more comfortable user experience.

【Two Directions & Modes】The left and right buttons control the positive and negative directions respectively. Press the direction button you want. There are 2-speed modes (0-1800rpm, 0-3100rpm; the reverse direction only 1 speed: 0-2400rpm). These 2 modes can help you work at the right occasion at the right speed to avoid damage to your work.

【4.0Ah Battery & Fast Charger】 Our rechargeable lug nuts impact wrench is equipped with a 4.0Ah Li-ion battery and a fast charger. LED real-time power indicator and fast charger. Compared with other 2.0Ah batteries, it far exceeds their working time and can keep the wrench running continuously. You will not have to charge the battery frequently anymore.

【Powerful Motor】Hammer drill no-load speed up to 8000rpm, generating 28J of impact energy. Pick up the hammer and aim at the target, with the sound of da da da da, easily complete the work of breaking concrete, brick, clay, metal, rock, masonry, wall and other hard materials.

【Cordless & Rechargeable Design】The hammer drill equipped with 4000mA rechargeable battery which enrich your experience of working. The cordless design allows you to work in various complicated and narrow places, and get rid of the shackles of wired use.

【Ergonomic Design】The cordless hammer drill is equipped with a safety clutch device to protect your safety during work. Soft wrap handle prevents slippage and brings better, more comfortable grip during use.

【High-Efficiency Brushless Motor】It equipped with a high-efficiency brushless motors, the operation becomes more stable and stable. Tool speed can increase by increasing the pressure on the switch trigger. The maximum torque of the impact wrench can reach 346ft-lbs (470N·m) and max 3200 RPM speed, allowing you to tighten or loosen various nuts and bolts easily which saves your time and energy. Providing you with a more comfortable user experience.

【Two Directions & Modes】The left and right buttons control the positive and negative directions respectively. Press the direction button you want. There are 2-speed modes (0-1800rpm, 0-3200rpm; the reverse direction only 1 speed: 0-2400rpm). These 2 modes can help you work at the right occasion at the right speed to avoid damage to your work.

【4.0Ah Battery & Fast Charger】 Our rechargeable cordless impact wrench is equipped with a 4.0Ah Li-ion battery and a fast charger. LED real-time power indicator and fast charger. Compared with other 2.0Ah batteries, it far exceeds their working time and can keep the wrench running continuously. You will not have to charge the battery frequently anymore.

For use with 1.968 inches (49.99 mm) hub bore, Outer Bearing Cone: M - 12649, 07100, Outer Bearing Cup (race): M-12610, 07196, weight: 1.00 lbs

Prevents wheel bearing failure on boat, snowmobile, ATV, horse, RV and utility trailers

Grease level is shown with Auto Check feature - Eliminates bearing repacking

4 sets of inner bearings and races L68149/L68111

4 sets of outer bearings and races L44649/L44610

4 pieces of double lip grease seals 10-19 (171255TB, 1.719'' I.D.)

✔ Bearings - 100% Size inspection for optimum assembly.

✔ Material - Manufactured by chrome steel sturdy and durable.

✔ Seal - Double lips and spring to provide good sealing effect.

✔ Bearings - 100% Size inspection for optimum assembly.

✔ Material - Manufactured by chrome steel sturdy and durable.

✔ Seal - Double lips and spring to provide good sealing effect.

Cast galvanized wheel hub kit for boat trailers

Kit includes pre-greased bearings, seals, dust caps, lug nuts and a cotter pin

5 UHI lugs on a 4.5" bolt pattern

4 inner bearings L68149 ID 1.378'' and 4 inner races L68111 OD 2.362'';

4 outer bearings L44649 ID 1.063'' and 4 outer races L44610 OD 1.980'';

4 double lip grease seals 10-19 (171255TB) 1.719'' x 2.565''.

L-44649 Bearing (1-1/16" inside dimension) x 4

L-44610 races (1.98" outside dimension) x 4

Grease seal x 2, Cotter pins x 2, Dust caps x 2

4-pack Grease Cap Plugs for EZ Lube Grease Caps

Rubber Lube plugs for 1.18" dust cap hole

Dexter EZ Lube Grease Cap

MODEL: Bearing Buddy 1980A (Chrome Version) / Protective Bra 19-B

SIZING: 1.980 inch (inside diameter of hub) See secondary photograph for measuring instructions.

CONTENTS: One Pair of 1980A Chrome Bearing Buddy(s) with auto check feature & Matching Protective Bra(s)

Kit Includes: (2) L-68149 1-3/8 Inch Inside Dimension INNER Bearings (2) L-44649 1-1/16 Inch Inside Dimension OUTER Bearings

(2) L-68111 Inner Race 2.362 Inch Outside Dimension (2) L-44610 Outer Race 1.98 Outside Dimension

(2) Grease Seals - 2.56 Inch Outside Dimension - 1.72 Inch Inside Dimension

Kit Includes : (4) L-44649 Bearings - 1-1/16 Inch Inside Dimension

(4) - L-44610 Races - 1.98 Inch Outside Dimension

(2) - Grease Seals - 1.98 Outside Dimension / 1.25 Inside Dimension

✔ Bearings - 100% Size inspection for optimum assembly.

✔ Material - Manufactured by chrome steel sturdy and durable.

✔ Seal - Double lips and spring to provide good sealing effect.

Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts

Fits both 1" and 1-1/16" diameter straight spindles

Hub measures 4-1/4 inches tall (through center of hub)

L-68149 1-3/8 Inch Inside Dimension x 2, L-44649 1-1/16 Inch Inside Dimension x 2

L-68111 Inner Race 2.362 Inch Outside Dimension x 2, L-44610 Outer Race 1.98 Outside Dimension x 2

Grease Seal x 2, Cotter pins x 2, Dust Cap x 2

Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts

Fits both 1" and 1-1/16" diameter straight spindles

Hub measures 4-1/4 inches tall (through center of hub)

GENUINE REPLACEMENT PART — Lippert helps you take the guesswork out of getting your trailer back on the road with exact-match replacement parts

MUTIPLE OPTIONS — Our trailer brake hubs are available in a variety of bolt patterns, axle ratings and sizes to fit your needs

DURABLE CONSTRUCTION — This industry-standard hub assembly is constructed from solid grey iron

Kit Includes (4) - L-44643 Bearings - 1 Inch Inside Dimension

(4) - L-44610 Races - 1.98 Inch Outside Dimension

(2) - Grease Seals - 1.98 Outside Dimension / 1.25 Inside Dimension

For use with BT8 spindles

Rubber, double lip design with steel construction

Dimension: 1.249'' x 1.983'' x 0.250''

Kit for Easy Boat Trailer Maintenance: Complete bearing kit with tools included for smooth boat trailer operation

Tools to Prolong Trailer Life: Replace worn bearings to extend the life of your boat trailer and accessories

Durable Parts for Marine Use: Designed for marine and boating use, perfect for fishing and recreational boats

Sufficient Wheel Replacements for You: you will receive 4 pieces of trailer hub caps with 4 pieces of rubber plugs, enough to meet your daily use or replacement, can be stored for a long term, and can be also shared with friends or relatives who have a trailer

Notable Size Details: our trailer axle grease cap measures about 1.98 inches in diameter, 1-7/16 inch high, and the rubber plug is about 1.5 x 1.5 x 0.2 inches, fit for 2,000 to 3,500 lb trailer wheel hubs

Quality Material Selection: our trailer bearing dust cap is made of iron, a galvanized surface, sturdy and tough, strong against breakage and deform, corrosion and rust, serving your trailer for a long time

Replacement bearing kit

Fits 3,500 lbs. capacity trailer axles

Includes every component needed to repack one axle hub

✔ Advantage - Rotating quiet and high speed, high quality chrome steel bearings are rugged and durable.

✔ Bearing - 100% dimensional tolerance, noise and vibration inspection, for optimal installation and performance.

✔ Fits for - Trailer axle hub wheel for 1-1/16'', L44649/L44610 x 4, 12192TB seal, cotter pin and dust cover x 2.