Best Makita Power Tool Battery Chargers in 2026

Simultaneous Charger: All ports of the DEWALT 20V battery charger charge at the same time

Charges 12V MAX, 20V MAX, and FLEXVOLT 20V/60V MAX DEWALT Batteries

8 amps output per port (simultaneously)

SPEED - Charges 18V LXT 2.0Ah battery in 25 minutes, 3.0Ah in 30 min., 4.0Ah in 40 min., 5.0Ah in 45 min.

TECHNOLOGY - Communicates with the battery's built-in chip during the charging process to optimize battery life

INNOVATION - Built-in fan cools the battery during the charging process for faster charge time

li-ion Charger for Makita Battery BL1013 BL1014(Battery Not Included)

Lithium-ion Batteries charger

Lithium-ion Batteries charger for Makita BL1013 BL1014

Better security: The adapter(1pcs included) is equipped with a fuse and high-quality wire to prevent excessive transient current from damaging the battery and equipment. You can use it safely

Perfectly compatible : work with for Makita BL1860 BL1850 BL1840 BL1830 BL1860B BL1850B Li-ion batteries. Easy to install ,locks on you battery very well.

Easy to DIY operate:The adapter is equipped with a switch to control the current of the battery on or off. At the same time, it is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better.

Replace DC18RC 14.4V-18V rapid lithium ion battery charger. Input Voltage: 100v-240V, 50/60Hz. Combine all chargers into one, no need to spend the big bucks on other chargers

DC18RC Charger: Compatible with 14.4V - 18V Lithium-ion batteries, BL1815 BL1830 BL1840 BL1850 BL1860 BL1415 BL1430 etc. Just need one Energy tech 18V lithium-ion Rapid Optimum Charger, let your battery have a nice extended run time

The charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature.

Battery Specifications. Battery Type: Li-ion | Voltage: 18V | Capacity: 5000mAh. Capacity upgrade to 5000mAh, longer run time and improved performance

Charger Specifications. Input: AC 110V–240 V | Output: DC 14.4V - 18V | Output current: 2.5A. Rapid Charger, A full charge for 5.0Ah battery needs only 45 minutes, 3.0Ah battery in 30 minutes, and 1.5Ah battery in 15 minutes

Fully compatible with 18V cordless power tools, replace 18V batteries BL1860 BL1860B BL1850 BL1850B BL1840B BL1840 BL1830 BL1830B BL1820 194205-3 196399-0 194309-1 LXT-400. Charger charges all 14.4V-18V Lithium-Ion Battery. With the LED indicator which can monitor the battery's status

Updated USB charging adapter: Long press the flashlight button for 3 seconds to light up. Compatible with 14.4v ~ 18v LXT Lithium ion battery, such as BL1415, BL1430, BL1445, BL1815, BL1830, BL1845 (Replacement for ADP05, NOT original )

Unique LED Light Design: 200 lm High brightness LED Light, lighting time more than 25 hours if use 4.0AH battery. Not only as a light on the job site, but also be used as flashlight, emergency light.

Make Full Use Of The Battery: 2 USB ports provide quick and easy charging. 3.6A Max total output when both USB ports are connected. Applicable to mobile phones, tablet PC, USB fans, and speakers.

【DC18SF BATTERY CHARGER】This is a replacement charger for Makita 14.4v-18v lithium-ion batteries, such as BL1830, BL1840, BL1850, BL1860, BL1815 etc. Fast charges your batteries without any damage.

【EFFICIENT 4-PORT FAST CHARGER】Can charges 4 for Makita 14.4V-18V lithium batteries simultaneously for increased efficiency and less downtime or one independently. Charges 18V LXT Lithium-Ion 3.0Ah batteries in only 30 minutes, 4.0Ah batteries in 40 minutes, 5.0Ah batteries in 45 minutes, 6.0Ah batteries in 60 minutes.

【INTELLIGENT PROTECTION】The built-in safeguards (built-in chip and cooling fin) can monitor each battery and are going to protect against overcharging, overloading, overheating & short circuiting. 4 ports and each 3A output.

Replacement Charger Compatible with Makita 14.4V to 18V Lithium ion Batteries

Compatible with Makita BL1815 BL1830 BL1840 BL1850 BL1860 BL1415 BL1430 BL1440 BL1450 BL1460 etc

Universal 110V to 220V voltage input, charges Li-Ion 3.0Ah battery in only 22 minutes and Li-Ion Compact series batteries in only 15 mins

Battery adapter compatible with makita 14.4v ~ 20v LXT Lithium ion battery, such as BL1415, BL1430, BL1445, BL1815, BL1830, BL1845

1.5A output from each USB port to provide quick and easy charging, 3.0A total output when both USB ports are connected

Special Design of This Cordless Power Source with High Bright 200 lumens LED light. It can help customers to provide light in the dark environment or when the electricity is cut suddenly.

Charges 18V LXT 2.0Ah battery in 25 minutes, 3.0Ah in 30 min., 4.0Ah in 40 min., 5.0Ah in 45 min., 6.0Ah in 55 min.

Replace Makita DC18RC 14.4V-18V rapid lithium ion battery charger. Fit for Makita BL1830, BL1840, BL1850, BL1860, BL1815 power tool batteries.

Integrated LED Battery charge level indicator allows user to monitor battery charge.The built-in fan circulates air through the battery during the charging process to cool the battery for faster charge time.

Brand new replacement, JANRI Brand ,Top quality

2-in-1 14.4/18V 4A Li-ion Battery Smart Charger for Makita DC18RD DC18RC DC18SF DC18RA

It can independently charge two batteries at the same time

Widely Compatible: Replacement for all Makita 14.4V-18V LXT lithium ion battery charger DC18RC, DC18RA.

Fit Makita Battery Models: 14.4V-18V LXT Lithium-Ion Battery BL1850, BL1840, BL1830, BL1815, LXT-400, 194205-3, 194204-5, BL1415, BL1440, BL1430, 194065-3, 194066-1, DA340DRF, BDF343.

Real Rapid Charger: Advanced charging technology, universal 110V-220V voltage input. A full charge for 5.0Ah battery needs only 45 minutes, 3.0Ah battery in 30 minutes, and 1.5Ah battery in 15 minutes.

Equipped with Bluetooth to wirelessly connect your mobile device to play music

Charges 18V LXT Lithium-Ion and 12V max CXT batteries

Charges an 18V LXT Lithium-Ion 5.0Ah battery in only 80 minutes

Replace DC18RC charger, compatible with makita 14.4V-18V Lithium-Ion Batteries

Built-in circuit protection against over heating, short circuit and overloading, together with detection for damaged batteries

DC18RC charger will come with a small fan cooling to extend the service life

Application - Suitable for Makita DC18RD Double Charger & Makita DC18RC DC18RA DC18SC DC18RF DCB18SD Single Chargers & Makita DC18SF 4-Port Chargers to fasten on the wall, bench, garage, workshop, work truck, use to secured and out of the way, allow for more workspace.

Installation - Simply install the makita charger holder to the back of your charger, no need to mark the installation positions in advance, you can rotate out the charger holder to mount any your desired surface directly with 4screws(included).

Features - Our makita charger mount is made of high-quality ABS plastic, which is sturdy and durable(not 3D printed). Weight as low as 14g per holder, very easy to carry and install.

【WIDE COMPATIBILITY】 Replacement for Makita DC18RC DC18RE DC18RA charger, compatible with Makita 14.4 V / 18 V lxt lithium-ion battery BL1860 BL1850 BL1840 BL1830 BL1815 BL1415 BL1440 BL1430 and more.

【FAST CHARGER】 Advanced charging technology, supports 100V-240V AC input, 6A output, It charges two 2.0Ah batteries in just 25 minutes, two 3.0Ah batteries in just 30 minutes, two 4.0Ah batteries in just 40 minutes, two 5.0Ah batteries in just 45 minutes, two 18V 6.0Ah batteries in just 60 minutes.

【SAFETY AND RELIABILITY】 Made of high quality ABS fireproof plastic and metal, equipped with an intelligent protection system that protects your battery from overheating, overcurrent, overload, overcharging and short circuit, for longer battery life and safe charging.

【Multifunctional Wall Mount】Specially designed for the Makita product line, the bracket can hold up to one Makita single charger DC18RC, 2 Makita batteries (14.4V/18V), 2 Makita cordless drills. Allows you to have a small integrated tool bench

【Save space】Makita batteries including charger are always ready to hand and stored on the wall of your workshop or garage to save space. You can now use the space for the bulky charger on the work surface sensibly again. Store your Makita tools and keep them away from children.

【Excellent Material】The charger wall bracket is made of high quality iron, and its bearing capacity far exceeds that of traditional wall brackets, very strong, not easy to rust, so you don't have to worry about it being damaged during use.

Widely Compatible: Replacement for Makita 14.4V-18V LXT lithium ion battery charger DC18RC DC18RD DC18RA

Dual-Port Charge Simultaneously: 2 packs of Makita 14.4V-18V LXT Lithium‑Ion batteries can be charged at the same time, minimizing downtime. 4-amps output per port for efficient charging and improve work efficiency. Enables you to move quickly from one task to the next with tools that are ready for the job

Real Rapid Charger: Advanced charging technology, universal 110V-220V voltage input. A full charge for 5.0Ah battery needs only 45 minutes, 3.0Ah battery in 30 minutes, and 1.5Ah battery in 15 minutes

【WIDE COMPATIBILITY】 Replacement for Makita DC18RD DC18RC DC18RA charger, compatible with Makita 14.4 V / 18 V lxt lithium-ion battery. Compatible with Makita BL1860 BL1850 BL1840 BL1830 BL1815 BL1415 BL1440 BL1430 and more.

【EFFICIENT 4-PORT FAST CHARGER】Supports 100V-240V AC input, 3A Max output. Can charges 4 Makita 14.4V-18V lithium batteries simultaneously for increased efficiency and less downtime or one independently. Charges 18V LXT Lithium-Ion 3.0Ah batteries in only 30 minutes, 4.0Ah batteries in 40 minutes, 5.0Ah batteries in 45 minutes, 6.0Ah batteries in 60 minutes.

【LED INDICATORS & 2 USB PORTS】 Portable battery charger diagnostics with an LED indicator light that communicates the battery charge status and enables you to plan work efficiently. DC18SF with dual 5V 2.1A USB ports for charging your mobile devices, such as mobile phone, USB fan, USB light, power bank etc.

Backpack utilizes four Lithium-Ion batteries to provide longer run time for LXT and LXT X2 (36V) tools

Provides up to 4X the run time when used with Makita LXT 18V products

Provides up to 2X the run time when used with Makita LXT 18V X2 (36V) products

★[REPLACEMENT FOR MAKITA DUAL CHARGER DC18RD] - We test every charger with Makita OEM battery and most 3rd party batteries before we put charger to your hand. Voltage Input: 110v to 240v, Voltage Output: 14.4v-18v, output Current: 3.5A. Great Replacement for Makita original DC18RD 18v Lithium-Ion 2-port rapid optimum charger DC18RD and DC18RC DC18RA DC18SF 18v drill tool battery charger. Our charger's cable length is 4 Feet.

★[WORKS WITH MAKITA OEM OR 3P 18V SERIES BATTERIES] - Widely compatible with OEM Makita 18v and 14.4v LXT lithium batteries BL1830B-2 BL1850-2 BL1850B-2 BL1840B BL1820B BL1860B-2 BL1830 BL1840 BL1850 BL1860 BL1815 BL1430 BL1450 BL1440 and etc. In addition, it fits most 3rd party such as Teenpower, Amityke, Aoasur, Ibanti’s replacement batteries.

★[Why Choose US] - Our dual charger for Makita chargers 2 batteries at the same, the LED light clearly show your charging statues, we use high quality materials for the charger thus do no harm to your OEM battery or 3rd party battery and extends batteries’ life, the Built-in air-cooling system keep the charger and battery work in a trusted and safe condition.

【USB Charger & 12V DC Ports】output 1: Type-C,PD. output 2: USB/QC3.0. output 3:1 DC 12V 2A port.Use with BL1850 slide battery (not included) on the job site to charge small electronic devices (smartphones, MP3, MP4, cameras, iPads, iPhone tablets and other USB devices) when AC power is not available .

【Perfect Fit】for Makita 18V lithium-ion batteries： BL1815 BL1820, BL1830, BL1840, BL1850, BL1860 etc.

【LED work light】 Equipped with 300 lm LED flash lighting system, there are three modes:100 lm/200 lm/300 lm brightnesses, suitable for camping, outdoor working in the dark and many other occasions.

Ideal replacement battery charger for power tools battery.

Battery delivers consistent power and run time in extreme temperatures.

The US standard 110v-240V plug, allows charging batteries in a faster way.

【Specification】Input: 100V-240V 50/60Hz, Output: 21V 2A.

【Fast Charger】A full charge for 1.5Ah batteries in 15 minutes, 3.0Ah battery in 30 minutes, 5.0Ah battery needs only 45 minutes.

【Multiple Protection】Our Li-ion battery charger built-in charger diagnostic program checks batteries with every charge, features quick charging and a LED indicator to display charging status: charged, charging, battery too hot or too cold.

✔Broad Compatibility: This charger fits all MechanicAnts power tools' battery pack, and fits replacement Makita BL1820/BL1820B/BL1840/BL1840B Lithium Ion Battery Pack as well

✔Tech Specs: Supports 100-240V AC input, 60Hz, 2AMPS 20V Max DC Output.

✔90 Days Money Back and 1 Year Warranty! Class2 Battery Charger, comply with ETL testing standards.

Product Specifications Input Voltage: 100V-240V Output: 20V MAX = 2.0A X2 Frequency: 50~60Hz Color: Green Great Replacement for Makita original DC18RD 18v Lithium-Ion 2-port rapid optimum charger and DC18RC DC18RA DC18SF 18v drill tool battery charger.

Compatibility The DC18RD Battery Charger Compatible for 18V BL1815 BL1830 BL1840 BL1845 BL1860 14.4V BL1415 BL1430 BL1440.BL1445 BL1460 Battery.

Simultaneous Charging: It can charge 2 batteries at the same time, eliminate the voltage error of 2 batteries, improve tool performance and extend battery life; Built-in air-cooled heat sink and cooling battery, LED indicator light and music display battery charging status.

【Compatible Models】:ERJER DC18RC Replacement Charger is Compatible with makita 14.4V &18V Lithium-ion batteries, such as BL1815 BL1830 BL1840 BL1850 BL1860 BL1415 BL1430 etc. Only for Makita Original Battery. Fully compatible with original battery. If it is a non-genuine battery, it may not be compatible. Please note.

【Rapid Charger& Sound Indicator】: ERJER Makita lxt battery Charger Output Specifications is Up to 5A. Can charge the battery as fast as possible, saving your waiting time. Charger 3.0Ah battery in 22~50 minutes. Charger 4.0Ah battery in 25~60minutes.Three melody sounds indicating normal battery connecting, fully charging, and abnormal battery respectively.

【Perfect Cooling System】Rapid Optimum Charger has a built-in fan to cool the battery while charging, Lower the temperature of the battery and charger, Extended lifetime. Safe and secure.

Widely Compatible: Replacement charger for all Makita 14.4V-18V LXT lithium ion battery charger DC18RC DC18RD DC18RA

4-Port Charge Simultaneously: 4 pack of Makita 14.4V-18V LXT Lithium‑Ion batteries can be charged at the same time, minimizing downtime. 3-amps output per port for efficient charging and improve work efficiency. Enables you to move quickly from one task to the next with tools that are ready for the job

Real Rapid Charger: Advanced charging technology, universal 110V-220V voltage input. A full charge for 5.0Ah battery needs only 45 minutes, 3.0Ah battery in 30 minutes, and 1.5Ah battery in 15 minutes

🌠【PACKAGE INCLUDE】2*BL1850B batteries and 1* dc18rc charger.100% Brand new 5000mAh Rechargeable; Battery Type: Lithium-ion; Voltage: 18V; replacement for Makita 18V batteries, not original brand, if mind, pls do not place order, thanks.

🌠【BATTERY COMPATIBILITY】100% Compatible with Makita 18Volt Lithium Cordless Power Tools BL1860B BL1860 BL1850 BL1850B BL1840 BL1840B BL1830 BL1830B BL1815B.

🌠【CHARGER COMPATIBILITY】Replacement battery charger for All Makita 14.4V-18V Lithium-ion Battery. Diagnostics with LED indicator shows battery charging status.