Best Cordless Tool Chargers Converters in 2026

Compatible with most DEWALT 18Volt tools and allows for use of 20Volt MAX compact batteries

Requires use of DEWALT 20Volt MAX charger

Use with DCB201, DCB203, DCB203BT compact batteries

Compatibility: Our battery power connector is well-made, snug fit your battery, can install and lock your battery easily.Compatible with Dewalt 20V /18VDCB series lithium-ion batteries.

Safety Design: For your safety, Our product has some security design. The switch ensures you can turn on&off the battery easily. The fuse supply overpowers protection. The copper contact improves the conductivity and safety. Heat-resistance 12 AWG wire is suitable for high-power batteries.

Easy to Install: Just move the power adapter to the inside of the groove, then push the converter and ensure it had locked the battery. ( Tips: If you want to remove the adaptor from the battery, Please press down the buckle of the battery, then remove it. ）, there are 4 fixing screw holes on the adapter for easy fixing with screws.

【Adapter Converter】: This QINIZX adapter can compatible with Dewalt 18V 20V max or Milwaukee 18V Li-ion Slide Battery to make them apply to Craftsman 19.2Volt C3 Cordless Tools. NOTE: When installing the battery at the bottom of the adapter, please use a larger force to press the button of the adapter, otherwise the battery will not be installed. If you need use on craftsman 20V V20 tools, please purchase in B0C6HHZPR4 .

【Applicable Batteries】: The bottom of 19.2V tools adapter can compatible with Dewalt 18V/ 20V max XR Slide-on Lithium-ion battery, eg. DCB180, DCB181, DCB182, DCB184, DCB200, DCB201, DCB203, DCB204, DCB205, DCB206, DCB207, DCB208, DCB230, DCB240, DCB606, DCB609, N123283 etc.; It also Compatible with Milwaukee 18V li-ion battery, eg. M18, 48-11-1811,48-11-1815,48-11-1820,48-11-1822, 48-11-1828, 48-11-1840,48-11-1841,48-11-1850,48-11-1852,48-59-181, 48-59-1850, 4932352071, 4932430063, etc.

【Replace 19.2Volt NI-MH Battery】: Replacement for Craftsman C3 19.2V Lithium batteries 11375, 11376, 130279005, 11375,11376,130279003,1323903, 1323517,315.114480, 315.114852,315.101540, 15.11448, 315.115410 130239006, 130235021. Compatible with Craftsman C3 315.115410 C3 19.2Volt Tools 10126,11541,11543,11570,11576,11578,11580,11586,17338,17339, CRS1000.

✈【Applicable Models:】--- Perfectly matched for Makita 18V 20V Max Li-ion Batteries BL1830 BL1840 BL1850 BL1860 BL1860B BL1850B BL1830B BL1820 BL1815;

✈This adapter can use the lithium batteries listed for DeWalt DCB200 20V MAX lithium power tools and enjoy the benefits of extended lithium ion battery operation time on existing 18V instruments;

✈The maximum initial battery voltage (measured without workload) is 20 volts, the nominal voltage is 18 volts;

Allows for use of Black & Decker 20V Lithium Battery LBXR20, LBXR20OPE, LB20,LBX20,LBX4020,LB2X4020,BXR2020-OPE,LB2X3020-OPE, LBXR20BT

High quality 20v battery adapter for Black & Decker original adapter HPA1820 for 18V NiCad & NiMh battery Tools

For Black&Decker For Porter HPA1820 18V To 20V Battery Convertor Adapter

Brand new battery adapter, Compatible with Dewalt 20V MAX XR battery or Milwaukee 18V M18 battery, and converted to replacement Makita 18V Battery BL1830 BL1840 BL1850 BL1860 battery etc, Compatible with Makita 18V Cordless LXT Power Tools.

With USB Port 5V/2.1A, Can be used for smart phone, iPad, camera, shaver and more.

Thickened pure copper contact design, made of high quality material, durable and safe, portable and convenient to carry and easy to use.

🛒【Function】DM18M battery adapter converts for DeWalt 18v-20v & Milwaukee M18 18v lithium batteries to Makita 18v lithium battery, use for Makita 18 volt cordless power tools. with 5V/2.1A USB output port, charge your mobile device anytime.

🛒【Superior Compatibility】Not only compatible with DeWalt 18v - 20v lithium batteries(DCB200, DCB201, DCB203, DCB203, DCB204, DCB205, DCB206 etc.), but also compatible with Milwaukee M18 18V lithium compact batteries(11-1820, 11-1822, 11-1828, 11-1840, 11-1841, 11-1850 etc.), Convert them to Makita 18v lithium batteries.

🛒【Safe & Reliable】Echoyee convert adapter built-in voltage protection chip, comply with FCC RoHS and CE security testing standards, made of high quality ABS plastic, safe and durable.

【Adapter Converter Feature】This adapter can make listed lithium batteries use on for craftsman 19.2V Cordless Tool 315.115410, 10126, 11541, 11543, 11570, 11576, 11578, 11580, 11586, 17338, 17339, CRS1000. and let you Enjoy the benefits of extended run-time of Li-Ion Batteries on your existing 19.2V power tools. (Tips: NOT 20v & V20 tools)

【Adapter Install Battery Type】The adapter bottom: Compatible with Dewalt 18v/ 20v MAX Slider Lithium Batteries. eg. DCB200 DCB201 DCB203 DCB204 DCB205 DCB206 etc.; It also can Compatible with Milwaukee M18 18v Lithium Iron Batteries. eg. 48-11-1811, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1828 , 48-11-1840, 48-11-1841, 48-11-1850, 48-11-1852, 48-59-1812, 48-59-1850 etc.

【With USB Output Port】Built-in 5V 2.1A (Max) USB Charge Function, when the mobile phone is temporarily out of power, you can charge the charging treasure function. (Not contain USB charge line, Not fast charing device)

The Battery Adapter is repace of DCA1820 Converter. It is compatible with dewalt 18V/20V Lithium-ion batteries and Milwaukee M18 18V Lithium-ion batteries.

Compatible with DEWALT 18V tools and allows for use of 20V MAX compact batteries

Compatible with DCB201, DCB203, DCB203BT compact batteries

🔋【Product Advantages】This battery adapter can make listed lithium batteries use for Milwaukee M18 lithium cordless power tools,and let you enjoy the benefits of extended run-time of li-Ion batteries on your existing 20V tools.

🔋【Compatible with Battery】Allows for use of 18v/20v lithium batteries and replacement batteries in most batteries for dewalt DCB184 DCB181 DCB182 DCB200 DCB201 DCB205, DCB180, DCB204-2, DCB205-2, DCB200-2, DCB200 DCD series, DCF series, DCG series, DCS series etc.

🔋【Applicable Battery Voltage】Battery adapter for dewalt to milwaukee maximum initial battery voltage(measured without a workload) is 20volts,nominal voltage is 18volts.

【Using Notes】 1. Adapter Can NOT be used for power tool battery charging, it NOT fit into any chargers when adapter with battery. If you need to charge your battery, please use the original brand battery chargers; 2. Please remove it from the battery when not in use, Safe to use;

【Adapter Converter Feature】: This Adapter Converter can make Lithium batteries of the listed brands compatible with the tools of the craftsman c3 19.2v max system. and let you enjoy the benefits of extended lithium ion battery operation time on existing 19.2-Volt instruments. Replacement Battery Compatible with Craftsman 19.2V C3 130279005 130279003 130279017 130235021 315.113753 315.114850 315.114852 315.11485 315.115410 1323903 1323517 11375 11376 Cordless Tools.

【Convert 20V Li-ion Battery Models】: The bottom of this 20V lithium battery adapter can compatible with Porter-Cable 20V Lithium Battery(PCC685L, PCC680L), or Compatible with Black&Decker 20V Lithium Battery(LBXR20, LBX20, LB2X4020), or Compatible with Stanley 20V Lithium Battery(FMC680L).

By using the Ryobi adapter, it allows them to use other existing brands of batteries in their Ryobi 18V tools.

Convert the Existing Dewalt 20V/60V battery with this adapter to Ryobi 18V tools use.

The adapter offers convenience and efficiency by eliminating the hassle of constantly switching between different batteries for different tools. With the adapter, users can seamlessly interchange their Dewalt or Milwaukee battery across multiple Ryobi tools

Perfectly compatible with Dewalt 20v li-ion batteries and compatible with Milwaukee m18 18v 18V li-ion slide batteries【Note】 When installing the battery at the bottom of the adapter, please use a larger force to press the button of the adapter, otherwise the battery will not be installed, thank you for your understanding

Allows for use of Dewalt 20v or Milwaukee 18v lithium batteries listed for Craftsman 19.2Volt C3 Cordless Tools. Replacement for Craftsman C3 19.2V batteries XCP PP2020, PP2030, PP2010 , PP2025, PP2011, 11374, 11371, 17300, 935709, 11375, 11376, 130279005, 11375,11376,130279003,1323903, 1323517,315.114480 etc.

USB port for charging phones and powering equipment that uses USB(OUTPUT: 5V, 2.1A)

Work With for Blacker decker 20V & Porter Cable 20V Lithium-Ion battery.

The adapter work with for Black+Decker 20V & Porter Cable 20V battery Can Replacement for Ridgid AEG 18V Hyper li-ion Battery.

Adapter Can not be charged .You Must charge the battery with a suitable charger.

【Multi-Use】This battery adapter is universal for dewalt 18V 20V Li-ion battery DCB203 DCB206 and for Milwaukee M18 48-11-1860 18V Li-ion battery.

【Well Compatible】Fits well for RIDGID 18v Cordless Tools, which means you can use your old for Dewalt/Milwaukee batteries to for Ridgid 18V power tools.(WARNING: Not Compatible with RIDGID 18v Advanced Tools).

【Materials】DM18AR Adapter is ABS high -quality materials, high temperature resistance, wear resistance, drop resistance, easy to carry, easy to use. The solid design guarantees that it will not slip.

【Adapter Converter Function】This battery adapter can compatible with Dewalt 18V 20V MAX XR slide lithium battery to make them work on Black & Decker 20V/Porter Cable 20V/Stanley 18/20Volt Lithium-Ion cordless tools. Let you enjoy the benefits of extended lithium ion battery operation time on existing 20V tools instruments.

【Mounted Battery Models】The bottom of this adapter can compatible with Dewalt 18V 20V max XR Lithium-Ion battery, eg.DCB180, DCB181, DCB184, DCB200, DCB200-2, DCB201, DCB203, DCB204, DCB204-2, DCB205, DCB205-2, DCB206, DCB206-2, and also compatible with Flexvolt 20V max battery;

【Replace 20V Li-ion Battery】Replacement for Black and Decker 20V MAX(Not OLD 18v) Lithium Battery(LB20, LBXR20, LBX20, LB2X2020, LB2X3020, LB2X4020); or Replacement for Porter-Cable 20V Lithium Battery( PCC680L, PCC681L, PCC682L, PCC685L,); or Replacement for Stanley 18V/20V max Lithium Battery(FMC680L, FMC687L, FMC688L, SCB20C-A9, SCB20D-A9).

Adapter Bottom Compatible Batteries: Work for Milwaukee M18 48-11-1828 48-11-1815 48-11-1840 48-11-1850 48-11- 1860 48-11-1890 18V li-ion battery.

Compatible Tool Models: Works with Metabo HPT 18V and Hitachi 18-Volt slide style tools. (Not fit for HPT 36V Tool)

Important Tip: Adapter can not be charged. You must charge the battery with a suitable charger.

Condition: Made Of Mold ABS Injection Molding

Only Fits Bauer 20v MAX Platform Cordless Tools.

Compatible with Black + Decker 20v MAX (NOT OLD 18v) Lithium Batteries.