Best Engineered Marine Parts in 2026

3/8-18 Thread Temp Sender for Marine Engines

Replaces Mercury Marine/ Quicksilver 806490T

Replaces OMC/Volvo Penta 3853787

Motor mount kit designed for Index inflatable boats

Lets you attach up to 3.5-horsepower motors

Made of plastic backing with aluminum support arms

Efficient Power: 55Lb Thrust - This 12V Electric Trolling Motor Provides Excellent Power And Efficiency For Any Boater. The High Quality Build Allows The Motor To Run All Day Long Without Overheating, Or Making Noise To Spook Fish

Features: This Motor Features A 30 Inch Shaft, A 5 Led Battery Meter, A 6 Inch Telescoping Tiller Handle, And 3 Blade Propeller. The Mount Angle, Height, And Direction Can All Be Adjusted And Locked Into Place When Needed

Speed: This Motor Has 8 Speeds, 5 Forward And 3 Reverse. The Motor Is Designed For Trolling, So The Top Speed Of This Motor Is About 4Mph, But Depends On Your Boat Shape, Weight, Water, Wind, And Other Factors. Our 3 Blade Propeller Gives The Motor Great Low End Torque To Get The Boat Moving

SIGNAL OUTPUT: Standard American Output, 240 ohm - 30 ohm (Empty - Full), Non-Linear Output, 18-21mm Per Step

MOUNTING METHOD: SAE 5 Hole Mounting Pattern ( NOT equidistant )

OPERATING: 12V/24V, -40° F to + 185° F (-40° C to +85° C)

New

EXTERNAL BATTERY PORTS - Safely and easily connect your trolling motor or accessory to the battery ports without opening the box.

DUAL INTEGRATED CIRCUIT BREAKERS - Integrated with 10 Amp and 60 Amp circuit breakers to protect your trolling motor and other accessories from electrical damage.

DIRECT USB CHARGER AND ACCESSORY PORT - Provides one USB Charger and one 12V accessory port for convenient connection of various DC accessories.

Innovative Transom Saver helps lessen stress on a boat’s transom when boat with an outboard motor is being trailered

Reliably supports the cantilevered engine during transport

Comes with a choice of mounts for the end attached to the trailer: roller bracket or trailer mount bracket

ULTRA ABSORBENT QUICK DRY TOWEL: Our highly absorbent towel is made from sponge-like synthetic chamois PVA material that sucks up and holds onto water, drying surfaces faster than cloth towels. The ultimate chamois towel & drying towels for cars.

USE FOR ALMOST ANYTHING: Use as a car shammy towel drying, PVA cooling towel, swim towel, boat shammy ,boat towel, chamois cloth for car. Leaves your boat, car or RV interior and exterior spotless! The ultimate in personal use & car washing supplies

SUPER SOFT, LINT-FREE & SCRATCH-FREE: This synthetic chamois towel is ultra-gentle making it a highly versatile and a safe absorber drying cloth for various surfaces. Will never scratch or scuff, leave behind streaks, lint, water-marks or residue.

MOTOR ACCESSORY: Keep your boat’s engine in good condition by protecting it with the efficient and durable Shoreline Marine Dual Flow Flusher. This equipment is designed for most inboards and outboards and helps increase its life by protecting it from contaminants.

PROTECTS ENGINE: This motor flusher helps extend your outboard engine’s life by regularly flushing away salt, silt, and grime after use. Not only clean, but you can also winterize your boat with the help of this essential boat accessory and keep your investment in good condition.

EASY-TO-OPERATE: You can connect this boat motor flusher to a standard garden hose and help keep your motor clean by flushing away sand, salt, silt, and mud. If you need to tune your engine and make minor adjustments when on the water, you can trust this tool.

REMOVES MARKS & DIRT: Our premium Original Boat Eraser cleaner quickly removes dirt, grime, grease, salt, mud & scuffs from the deck, console, hull & seats of your boat. They lift away marks from shoes, fishing poles, nets, tackle boxes and coolers.

NO HARSH CORROSIVE CHEMICALS: Effortlessly and magically cleaning marks from the interior & exterior of your boat. Simply add water, squeeze to activate, and wipe away dirt and stains. These sponges DO NOT contain bleach or other harsh chemicals.

SAFE ON LOTS OF SURFACES: This perfect cool boating gift or accessories is safe and a perfect addition to your boat maintenance supplies pontoon or sail boat. Safe on fiberglass, leather, vinyl, plastic, aluminum, gelcoat & metal surfaces.

Number of Blades: 6, Brass Hub, Net Weight: 40g

Height: 18.71mm(47/64")

External Impeller Overall Diameter: 50.90mm(2")

Removes harmful deposits that accumulate from normal use

Improves fuel/air flow and overallengine performance

For use with all 2‐ and 4‐cycle carbureted and fuel‐injected gasoline engines

Kayak Shaft: 24-Inch Fiberglass Shaft Allows For Variable Depth Placement, While Offering A Lifetime Of Dependable Performance

Variable Speed: 8 Speeds (5 Forward & 3 Reverse) With 6-Inch Telescoping Handle Puts You In Total Control Of Your Ride

Saltwater Rated: Durable All Aluminum Motor Head W/ Corrosion Resistant Magnesium, Zinc, And Stainless-Steel Hardware For Saltwater Use (Lead-Acid Dc 12V)

Semi-universal outboard and stern drive flushing kit makes quick work of protecting your engine and drive from the harmful effects of galvanic corrosion

Essential and easy to use tool for flushing internal parts of engines and drives used in salt or brackish water or where invasive plant species must be flushed before departing a launch ramp area

Easily connects to a fresh water source with a standard garden hose connection

ULTIMATE DUAL FEED FLUSHER: Use the Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit – Marine Outboard Engine Flushing to obliterate salt and mineral build up along with other contaminants from your outboard boat engine’s lower unit cooling system when hooked up to a garden hose; Effective way to flush engine with fresh water to prevent clogging and corrosion and allow for engine adjustments

EASY INSTALLATION: Requires no tools for installation or removal; Simply slide the flusher muff cups over the top of the water intake slots on your boat and connect your garden hose to one of the included quick connect fittings to run motor out of the water or use to winterize motor; Never turn water supply to full force or damage to drive may occur

FITS YOUR BOAT: Compatible with most Johnson/Evinrude, Mercury, Yamaha, Chrysler, Force, Honda, Nissan, Suzuki, and Tohatsu outdrives; As long as your boat includes side water inlet ports, this flusher is for you; Rotate muff ears to fit and seal over the water pick-ups on the lower unit (cups swivel to be positioned horizontally or vertically for a multitude of ways to put it on)

fits 4-30HP Outboard Engine

Fits Tohatsu outboard models: M4 M5 M6 M6 M8 M9.8 MFS4 MFS5 MFS6 MFS9.8 MFS15 MFS18 MFS20C MFS25A MFS30A

Fits Nissan outboard models: NS4 NS5 NS6 NS8 NS9.8 NFS4 MFS5 NFS6 NFS9.8 NFS15 NFS18 NFS20C NFS25A NFS30A

★Model Characteristic: Perfect quality with good painting and speed ; OEM ones for Mercury Outboard Engines 25-60HP,Ref No.48-73136A45,13 Spline Tooth

★Size&Material: 10 3/8 Diameter x 13 Pitch; Rotation: Right; Blade:3 ; Color: Black; High Quality Aluminum

★Outstanding Quality : based on strict quality control ,our propellers are extremely durable without sacrificing top speed,acceleration or rmps,reduce the wear and tear on your engine and fully-fuel efficiency. Better speed and save money for you!

✔Arms Length:10" (256mm)，Rectangular Cap Size: 4.85" * 3" (123mm * 76.7mm)

✔Quick installation and use of garden hoses, idle-speed adjustment of starting motors, convenient for cleaning pollutants in the motor system,Keep your motor clean

✔Flushes your engine after every trip with this easy to use motor flusher , High elastic quality bracket, not easy to deform

Protects your outboard by making it easy to quickly flush salt water from the engine

Fits most popular outboard engines from Mercury, Mariner, Yamaha and Suzuki

Snaps on easily and slide valve remains on the engine permanently so it’s always ready for flushing

Color: Black Material: Aluminum Alloy Material

Inner Hole Diameter: 10mm

Number Blade: 3 Propeller Size: 7.4 Diameter X 5.7 Pitch

[ STRONGER 2023 EDITION ] Our premium boat muffs outboard as well as I/Os are constructed with rubber, flexible water lines and water tight seals to test, cool, winterize, warm and idle your engine before using or as part of a winterizing kit.

UNIVERSAL FIT: Our outboard motor muffs offer rotating ears and a U channel measuring 10.5" to rotate and adapt to almost any outboard motor and Inboard/Outboard I/O engines. Large ear muffs to flush away engine dirt while allowing easy flushing.

DOUBLE SIDED: Increased water supply from two sides offers superior intake compared to old single sided boat motor muffs. The flexible water tight boat muffs measure 3 1/4" by 5" and bend to allow the flusher to snuggly pinch your intakes.

Fit Tohatsu for Nissan OEM parts number: 353068210 353-06821-0 353068210M

Fit Mercury OEM parts number: 823054 823054Q

For most Tohatsu Nissan Outboard M NS F 2.5HP - 115HP (2/4 stroke).

1/4" Npt Female Three-Way Valve Click

quick and easy way to connect one or more tanks

Three-port diverting valve to regulate flow among three sections of pipe

Boat Propeller Rotation:R

Boat Propeller Material:Alloy

Boat Propeller Number of Blades:3

Number of Blades: 6, Brass Hub, Net Weight: 42g

Height: 13.08mm(33/64")

External Impeller Overall Diameter: 69.37mm(2 47/64")

Premium Venom brand VTS trim motor Kit with CLAMPS & BOOTS

No modifications required, Replaces / Compatible With SeaDoo part numbers 278000616 and 278001292

ONLY Fits the following models & years: GSI 1997, GSX 1996-1997, GSX Limited 1998-1999 & GSX RFI 1999-2001

Fit OEM part number: 87-859032T3 859032T 3

Fits for Mercury outboard models, remote control box shift throttle control box.

Wire length: approximately 18.5inch / 47cm

Number of Blades: 6, Plastic Hub, Net Weight: 10g

Height: 21.94mm(55/64")

External Impeller Overall Diameter: 39.54mm(1 9/16")

Number of Blades: 10, Plastic Hub, Net Weight: 65g

Height: 40.76mm(1 39/64")

External Impeller Overall Diameter: 58.16mm(2 19/64")

Number of Blades: 6, Brass Hub, Net Weight: 30g

Height: 18.76mm(47/64")

External Impeller Overall Diameter: 51.41mm(2 1/32")