Best Ersiqi in 2026

1. Right-angle stainless steel level monitoring float switch, easy to install and high sensitivity; The rod body and screw are all 304 stainless steel, and the wire is high temperature wire and anti-corrosion process, which can withstand high temperature, and is very suitable for use in special liquid and high temperature environment.

2. Liquid level float switch sensor is type A contact (normally open). Working temperature range (- 40 ℃ - 200 ℃), contact power: 70W,

3. Water level switch sensor is packaged in electrostatic bag, each bag is equipped with a liquid level sensor, and the sensor is equipped with a 30cm extension cable, which is convenient for users to connect.

1.Float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device.easy installation。 liquid level controller Light weight and simple working principle,high reliability.It can be easily converted from normally open to normally close by inverting the float.

2.Water level sensor switch： contact form A-type contact (normally open)，Contact power 10W,Load current 1A.Temperature range (- 40 ℃ - 80 ℃)

3. Float switch water liquid level sensors is packaged in electrostatic bags, each bag is equipped with a liquid level sensor, and the sensor is equipped with a 30 cm extension cable, which is convenient for users to connect.

1/4" male national pipe thread

1/4" basic flow size

Maximum inlet pressure of 300 pounds per square inch

Professional, premium aftermarket replacement

Provides the performance and dependability you expect from ACDelco

Manufactured to meet expectations for fit, form, and function

Standard Motor FV1T T-Series Other Fuel Valves and Solenoids (FV1T)

Part number: FV1T

Package Weight: 0.65 pounds

Direct replacement - this fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles

Restores functionality - this valve is made to fit and fully restore part functionality after the original valve fails

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Approvals: CE, UL, CSA, NSF

Electrical Ratings: 240 VAC, 0. 14A; 120 VAC, 0. 28A; 120 VDC, 0. 07A; 24 VDC, 0. 28A

Stem Material: Polypropylene

Great tool for the Blind and Low Vision

Pocket-sized and easy to carry with you

Uses one 9-volt battery (included)

Please Check The Compatible Table Note Above To Make Sure It Fit Your Model.

Every single Fuel Tank Pressure Sensor EVAP Vapor is 100% tested before shipping out

This fuel tank pressure sensor EVAP vapor vent switch is especially designed for Buick Century LeSabre Rainier Regal Cadillac Escalade Avalanche 1500 2500 Aveo5 C3500 Suburban GMC Envoy Sierra K P Yukon etc

Fit for: Acura Chevrolet Cadillac GMC Isuzu Oldsmobile Pontiac Buick

Note: THIS PART ATTACHES TO THE TOP OF THE FUEL PUMP MODULE ASSEMBLY FOR THOSE FUEL SYSTEMS THAT REQUIRE DUAL (2) PLUGS.

Other OE standard replacement for AC DELCO # 16238399, GM # 12219388, 16196060, 16217059, 16238399, 16257276, 22678829, 9377680, ACURA / HONDA # 8093776800, ISUZU # 8162117490, 8162383990, 8162572760, DENSO # 8162384090

Contact Water/Liquid Level Sensor, This is a photoelectric water liquid level sensor that is operates using optical principles. Open collector output mode, suitable for connecting various circuits and product applications.

The sensor has no mechanical parts, requires no additional adjustment, and has high sensitivity, low power consumption, corrosion resistance, high pressure resistance, high temperature resistance and chemical stability.

This sensor probe is small in size and has a structure that can be placed up, down, laterally, and diagonally in multiple orientations to detect solution spillage, dryness and horizontal level. Can be used as a reminder and alarm function.

Diesel Engine 6 Port Fuel Tank Selector Valve features upgraded latch and robust plastic housing for improved reliability and lifelong uncompromised performance

Replacement For Ford Part Number: 6C3Z-9189-A, 6C3Z9189A, 6005966, 5746352, F5TB9F271AA, F5TB-9F271-AA, 904-454, E9TZ9189A, F4TZ9189A

6 Ports Fuel Tank Selector Valve Diesel 5 Pins Replacement For F-250 F-350 F-450 F-550 Super Duty F-Series Truck

Float Ball Material: PP; Float Body Material: PP, the electrical life: can reach more than 1 million times.

Cable Length: 30cm, Float Ball Size(Approx): 19x16.5mm, Total Length: 45mm / 1.77", Temperature Rating: -20 ~ +80 C

The switch has the advantages of high sensitivity and durability. PP material is environmentally friendly and has excellent acid and alkali resistance.

Operating voltage: DC3-5V;Operating current: less than 20mA

Sensor Type: Analog

Operating temperature:10-30

The CQRobot non-contact liquid level sensor realizes non-contact detection of the liquid level in a closed container. It adopts advanced signal processing technology and high-speed signal processing chip, breaking through the influence of container wall thickness. It is simple to install and easy to use, and can detect the level of various toxic substances, strong acids, strong alkalis and various liquids in high-pressure airtight containers.

The principle is to use the inductive capacitance of water to detect whether there is liquid. When there is no liquid close to the sensor, the sensor has a certain static capacitance to the ground due to the existence of distributed capacitance on the sensor. When the liquid level slowly rises and approaches In the case of an inductor, the parasitic capacitance of the liquid will be coupled to this static capacitance, making the final capacitance value of the inductor larger.

The changed capacitance signal is then input to the control IC for signal conversion, which converts the changed capacitance into a change of a certain electrical signal, and then a certain algorithm is used to detect and judge the degree of this change. When the change exceeds a certain amount It is considered that the liquid level has reached the sensing point when the threshold is reached.

【 STANDARD MOTOR PRODUCT】STANDARD MOTOR PRODUCT FV5K w/ Connectors and Clamps Complete service kit. With Complete Instructions.

【 STANDARD MOTOR PRODUCT】DUAL TANK VALVE ( FOR VEHICLE WITH DUAL FUEL TANKS)

【 STANDARD MOTOR PRODUCT】Professional Quality Automotive Parts

The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.

The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.

The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.

Can do multi-point control, the control switch can be fixed with the liquid level position

High accuracy, high reliability and easy installation

Made of 304 stainless steel material, can be used in weak acid and alkali places

Intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break the influence of container wall thickness and achieve a true non-level Contact detection.

Non-contact liquid level sensor is not afraid of affecting water quality, does not need regular cleaning, long service life

The liquid level sensor can detect the level of various toxic substances, strong acids, strong alkalis and various liquids in high-pressure closed containers, has no special requirements on the material of the liquid medium and the cont

The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.

The liquid level sensor has intelligent liquid level reference adjustment and liquid level memory function, liquid level status display mode, which can realize multi-point series connection; can support high and low level output, NPN, PNP signal output and RS485 communication interface output ;Open collector output mode, wide voltage range (5~24V), suitable for connecting various circuits and product applications(Please Choose the appropriate model for your usage).

High stability, high sensitivity, strong interference capability, free from external electromagnetic interference, special treatment for power frequency interference and common mode interference, to be compatible with all 5~24V power adapters on the market.

Direct replacement - this fuel tank pressure sensor is designed to match the fit and function of the original sensor on specified vehicles

Ideal solution - this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction

Durable construction - this sensor is made from quality components to ensure reliable performance and a long service life

This is a non-contact water / liquid level sensor. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection.

No contact with liquid makes the module suitable for hazardous applications such as detecting toxic substances, strong acid, strong alkali, and all kinds of liquid in an airtight container under high pressure.

There are no special requirements for the liquid or container and this liquid sensor is easy to use and easy to install.

Auburn WCC-1138L Liquid Level Sensor (CS 14450)

Alumina Insulation

Hex: 13/16"

Simple to use liquid level indicator for blind, visually impaired or elderly.

Easy to attach to most glasses and cups to have audible indicator of liquid levels to prevent overspill.

Small and easy to store. Measures 1.5 x 2.5 inch.

Direct replacement - this fuel level sensor is designed to match the fit and function of the original sensor on specified vehicles

Ideal solution - this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction

Durable construction - this sensor is made from quality components to ensure reliable performance and a long service life

Max Contact Rating :10W.Max Switching Voltage:100V DC.Max Switching Current: 0.5A.

Temperature Rating: -30~125 degree Centigrade.Switch Forms：N.O /N.C.

Screw Thread: 1/2"NPT.Body Total Length : 11cm / 4.33".

Specifications: Operating voltage: 5V; Relay contact capacity: 10A / 250V; Controller size: 42 x 69mm; Sensor size: 83 x 21mm.

Three colors LEDs indicate low (red), medium (yellow) and high (green) water level, low water pumping or high water pumping respectively, and can be switched on and off by pressing the function switch rebound.

According to the water level of the detection pool (water tower), control the high current relay to realize the control, so that the water level is maintained between the low water level and high water level, easy to switch function.

They have no moving parts and are ideal for point level sensing of water and other liquids.

Installation is simple and quick through the tank top, bottom or side.

The sensor offers ±1 mm accuracy and broad liquid compatibility.

Fuel tank/vapor pressure sensor reports to the on-board computer fuel tank pressure

When not replaced, vehicle may experience failed emissions test and/or CEL illumination

Designed to meet or exceed OE specifications in form, fit and function