Best Federal Mogul in 2026

Auburn WCC-1138L Liquid Level Sensor (CS 14450)

Alumina Insulation

Hex: 13/16"

Auburn I-18 Igniter (CS 12969)

Replaces Crown CA200, CHAMPION OP-10, R6050

Hex: 15/16"

Auburn I-2-1 Igniter (CS 12946)

Replaces: Crown CA101, Eclipse 17232, R6025

Hex: 7/8"

Auburn IC-9-2 (CS 12965)

Replaces Crown CA480

Hex: 1-1/8"

1/4" male national pipe thread

1/4" basic flow size

Maximum inlet pressure of 300 pounds per square inch

Approvals: CE, UL, CSA, NSF

Electrical Ratings: 240 VAC, 0. 14A; 120 VAC, 0. 28A; 120 VDC, 0. 07A; 24 VDC, 0. 28A

Stem Material: Polypropylene

Great tool for the Blind and Low Vision

Pocket-sized and easy to carry with you

Uses one 9-volt battery (included)

Contact Water/Liquid Level Sensor, This is a photoelectric water liquid level sensor that is operates using optical principles. Open collector output mode, suitable for connecting various circuits and product applications.

The sensor has no mechanical parts, requires no additional adjustment, and has high sensitivity, low power consumption, corrosion resistance, high pressure resistance, high temperature resistance and chemical stability.

This sensor probe is small in size and has a structure that can be placed up, down, laterally, and diagonally in multiple orientations to detect solution spillage, dryness and horizontal level. Can be used as a reminder and alarm function.

Float Ball Material: PP; Float Body Material: PP, the electrical life: can reach more than 1 million times.

Cable Length: 30cm, Float Ball Size(Approx): 19x16.5mm, Total Length: 45mm / 1.77", Temperature Rating: -20 ~ +80 C

The switch has the advantages of high sensitivity and durability. PP material is environmentally friendly and has excellent acid and alkali resistance.

Operating voltage: DC3-5V;Operating current: less than 20mA

Sensor Type: Analog

Operating temperature:10-30

The CQRobot non-contact liquid level sensor realizes non-contact detection of the liquid level in a closed container. It adopts advanced signal processing technology and high-speed signal processing chip, breaking through the influence of container wall thickness. It is simple to install and easy to use, and can detect the level of various toxic substances, strong acids, strong alkalis and various liquids in high-pressure airtight containers.

The principle is to use the inductive capacitance of water to detect whether there is liquid. When there is no liquid close to the sensor, the sensor has a certain static capacitance to the ground due to the existence of distributed capacitance on the sensor. When the liquid level slowly rises and approaches In the case of an inductor, the parasitic capacitance of the liquid will be coupled to this static capacitance, making the final capacitance value of the inductor larger.

The changed capacitance signal is then input to the control IC for signal conversion, which converts the changed capacitance into a change of a certain electrical signal, and then a certain algorithm is used to detect and judge the degree of this change. When the change exceeds a certain amount It is considered that the liquid level has reached the sensing point when the threshold is reached.

The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.

The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.

The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.

Can do multi-point control, the control switch can be fixed with the liquid level position

High accuracy, high reliability and easy installation

Made of 304 stainless steel material, can be used in weak acid and alkali places

Intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break the influence of container wall thickness and achieve a true non-level Contact detection.

Non-contact liquid level sensor is not afraid of affecting water quality, does not need regular cleaning, long service life

The liquid level sensor can detect the level of various toxic substances, strong acids, strong alkalis and various liquids in high-pressure closed containers, has no special requirements on the material of the liquid medium and the cont

The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.

The liquid level sensor has intelligent liquid level reference adjustment and liquid level memory function, liquid level status display mode, which can realize multi-point series connection; can support high and low level output, NPN, PNP signal output and RS485 communication interface output ;Open collector output mode, wide voltage range (5~24V), suitable for connecting various circuits and product applications(Please Choose the appropriate model for your usage).

High stability, high sensitivity, strong interference capability, free from external electromagnetic interference, special treatment for power frequency interference and common mode interference, to be compatible with all 5~24V power adapters on the market.

This is a non-contact water / liquid level sensor. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection.

No contact with liquid makes the module suitable for hazardous applications such as detecting toxic substances, strong acid, strong alkali, and all kinds of liquid in an airtight container under high pressure.

There are no special requirements for the liquid or container and this liquid sensor is easy to use and easy to install.

Auburn WCC-1138L Liquid Level Sensor (CS 14450)

Alumina Insulation

Hex: 13/16"

Simple to use liquid level indicator for blind, visually impaired or elderly.

Easy to attach to most glasses and cups to have audible indicator of liquid levels to prevent overspill.

Small and easy to store. Measures 1.5 x 2.5 inch.

Max Contact Rating :10W.Max Switching Voltage:100V DC.Max Switching Current: 0.5A.

Temperature Rating: -30~125 degree Centigrade.Switch Forms：N.O /N.C.

Screw Thread: 1/2"NPT.Body Total Length : 11cm / 4.33".

Specifications: Operating voltage: 5V; Relay contact capacity: 10A / 250V; Controller size: 42 x 69mm; Sensor size: 83 x 21mm.

Three colors LEDs indicate low (red), medium (yellow) and high (green) water level, low water pumping or high water pumping respectively, and can be switched on and off by pressing the function switch rebound.

According to the water level of the detection pool (water tower), control the high current relay to realize the control, so that the water level is maintained between the low water level and high water level, easy to switch function.

They have no moving parts and are ideal for point level sensing of water and other liquids.

Installation is simple and quick through the tank top, bottom or side.

The sensor offers ±1 mm accuracy and broad liquid compatibility.

[Liquid level transmitter]Input level transmitter and high-precision diffusion of silicon for more accurate monitoring of water level.

[4-20mA]Full digital conditioning circuit, 4-20mA signal output ensure more stable performance.

[IP68 waterproof]IP68 multi-layer waterproof protection ensure safe use and long service time.

The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.

The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.

The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.

The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.

The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.

The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.

Max Switching Voltage : DC100V; Max Switching Power : 10W; Float Ball Size : 26x26mm; Wire Length : 300mm; Screw : M10

The float switch can be installed at the top or bottom of the tank, depending on whether you want to detect water rising or falling.

Floating ball switch is a kind of liquid level control device with simple structure and convenient use. It has the advantages of small volume and long working life compared with general mechanical switch. When selecting the right material, any kind of liquid, pressure and temperature can be used.

1. Right-angle stainless steel level monitoring float switch, easy to install and high sensitivity; The rod body and screw are all 304 stainless steel, and the wire is high temperature wire and anti-corrosion process, which can withstand high temperature, and is very suitable for use in special liquid and high temperature environment.

2. Liquid level float switch sensor is type A contact (normally open). Working temperature range (- 40 ℃ - 200 ℃), contact power: 70W,

3. Water level switch sensor is packaged in electrostatic bag, each bag is equipped with a liquid level sensor, and the sensor is equipped with a 30cm extension cable, which is convenient for users to connect.

1.Float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device.easy installation。 liquid level controller Light weight and simple working principle,high reliability.It can be easily converted from normally open to normally close by inverting the float.

2.Water level sensor switch： contact form A-type contact (normally open)，Contact power 10W,Load current 1A.Temperature range (- 40 ℃ - 80 ℃)

3. Float switch water liquid level sensors is packaged in electrostatic bags, each bag is equipped with a liquid level sensor, and the sensor is equipped with a 30 cm extension cable, which is convenient for users to connect.

Max Switching Voltage : DC100V; Max Switching Power : 10W; Float Ball Size : 26x26mm; Wire Length : 350mm; Screw : M10

The float switch can be installed at the top or bottom of the tank, depending on whether you want to detect water rising or falling.

Floating ball switch is a kind of liquid level control device with simple structure and convenient use. It has the advantages of small volume and long working life compared with general mechanical switch. When selecting the right material, any kind of liquid, pressure and temperature can be used.

Intelligent liquid level benchmark adjustment and level memory function, liquid level display mode, can achieve multi-point series connection.

Strong compatibility through a variety of non-metallic material containers, such as plastic, glass, ceramics etc, with a 20mm induction distance. Electronic circuit structure rather than machinery ensures stable performance, durability and a long service life.

Wide voltage range (24V), suitable for connecting various circuits and product applications. Apply for all kinds of curved surface, arc, cylindrical container or pipeline liquid level detection.