Best Eunice in 2026

Size: ID: 3/8" (10mm), OD: 5/8 inch (16mm), AN6 Fuel Hose, Length: 10FT.

Material: This small engine fuel line is made of high-quality NBR, which is oil resistant.

Working Pressure: 0.6Mpa, Burst Pressure: 1.8Mpa, Temperature Range: -40°F to 248°F.

Size: ID: 1/4" (6mm), OD: 0.47 inch (12mm), AN4 Fuel Hose, Length: 10FT.

Material: This small engine fuel line is made of high-quality NBR, which is oil resistant.

Working Pressure: 0.6Mpa, Burst Pressure: 1.8Mpa, Temperature Range: -40°F to 248°F.

😃<p>Absorbent Non-slip: Eunice bath mats are intended for outside a tub or shower. Super absorbs and dries water to keep the bathroom floor dry. The surface cloth is comfortable science and technology velvet, the interlayer is made of absorbent sponge foam material containing diatomaceous earth, and the bottom is high-quality natural rubber. The restroom floor mat is a printed abstract pattern, Can be used as a decent bathroom decoration.</p>

😃<p>Ultra-thin Neat: The soft diatomaceous earth bath mat is about 0.16 inches thick. They fit right underneath the door. You don't trip, and robots can glide over. Recommend for the elderly and people with mobility problems. The Bath rug is more hygienic than traditional fluffy mats. When you have hair or other debris on here can immediately clean it up instead.</p>

😃<p>Environmental and Durable: Soft rubber will never depilate and disintegrate and can withstand the test of time and use. The Mat does not contain any harmful chemicals feel free to use it.</p>

[Car Tool Kit] - The 96 pcs tools set includes 76 pcs terminal removal tool kit, 13 pcs car trim removal tool kit, 5 pcs diamond-grip terminal cleaners, one automotive circuit tester and one storage bag.

[Durable and Widely Applicable] - The terminal removal tool kit is made of plastic with high hardness and high-grade stainless steel, which makes the depinning tool sturdier and more durable. With various specifications, the electrical pin removal tool can be widely applicable for most electronic equipment.

[Diamond-Grip Terminal Cleaner Kit] - This tool set is designed to remove rust on terminals in flat and casing shape, which can extend life of wiring harness. With wear resistance, high strength and sharp head, it is easy to clean terminals.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

Net Weight: 8oz (227g) per cartridge

Height: 7. 25” Diameter: 2. 6”

Cartridge has a Notched Collar providing easier alignment in portable gas burners!

ID: 3/8inch (10mm),OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 11.12 mm (0.44 inch), Outer Diameter: 17.2 mm (0.68 inch)

Working Temperature: -40°F to +300°F

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 5.56 mm (0.22 inch), Outer Diameter: 11.17 mm (0.44 inch)

Working Temperature: -40°F to +300°F

ID: 1/2inch (13mm);OD: 0.75inch(19mm).Material: NBR.

Working Pressure: 217psi.Max Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 4.7inch(120mm).

Applicable Medium: 1/2 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

ID: 3/8inch (10mm);OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

25 Feet of multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line

Can be used with unleaded gasoline, diesel fuel, gasoline blends of ethanol (E-10), E-85 and sour gas

Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"

ID: 5/16". OD: 0.43inch.Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000 psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

ID: 13/32". OD: 0.543inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.AN8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium:8AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

ID:5/16". OD:0.465inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

ID: 3/8 inch, OD: 5/8 inch, 6 AN NBR liner hose fuel injection 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 6Mpa, Handles temperature ranges of -40 to +275 degrees F

The more an engine is driven, the more carbon deposits can build up on fuel injectors, intake valves and ports

Gumout High Mileage Fuel Injector Cleaner is specially formulated to remove carbon deposits from engines with more than 75,000 miles

Cleans fuel injectors, intake valves and ports to restore performance, fuel economy and prevents future carbon build-up, which reduces emissions

ALL-IN-ONE FUEL: Ditch the gels, bars, chews, and pills and go all day with just Tailwind. Tailwind mixes with water to meet your calorie, hydration, and electrolyte needs, no matter how big a day’s in front of you.

NO GUT BOMBS: Sipping Tailwind provides steady, small doses of fuel that pass right through the stomach. The composition of Tailwind’s fuel matches what the gut is made to absorb, so Tailwind enters your system quickly, without taxing the digestive tract and causing stomach issues.

TASTY ALL DAY: If you don't like the taste, you won't drink it. That's why Tailwind has light, clean flavors that taste better the longer you go.

[Size] ID of 10an fuel hose:0.56"(14.22mm),OD:0.78"(19.8mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:101.6mm.

[Application] 10AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

Package includes the following 4 different size fuel line hose,Please undetand that there maybe 1-3 cm dimensional deviation due to manual measurement.

The Size of small engine fuel lines: I.D. x O.D: .080" x .14", overall length: 4 feet; I.D. x O.D: 3/32" x 3/16", overall length: 4 feet; I.D. x O.D: 1/8" x 3/16", overall length: 4 feet;I.D. x O.D: 1/8" x 1/4", overall length: 4 feet.

Fuel lines will degrade over time and these replacements are perfect for bringing your small engines back to life.High-quality petrol fuel line kit - oil, gas and corrosion resistant.

[Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F (-40°C to 125°C);Min bending radius:63.5mm.

[Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.

Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.

Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.

Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.

[Size] ID of 10an fuel hose:0.56"(14.22mm),OD:0.78"(19.8mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:101.6mm.

[Application] 10AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

[Size] ID of 8an fuel hose:0.43"(10.9mm),OD:0.64"(16.25mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:88.9mm.

[Application] 8AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

Provides easier and more reliable starts

Remains stable 2 years in the tank and 5 years in the sealed container

Extends engine life and improves the performance of outdoor power equipment

ID: 3/4 inch / 19mm, OD: 1.1 inch / 28mm, 12 AN NBR liner hose, 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -40 to +275 degrees F

ID: 5/8 inch / 16mm, OD: 0.9 inch / 23mm, AN10 NBR liner hose, 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -40 to +275 degrees F

1.5 feet of fuel injection hose designed specifically for auto and truck fuel injection systems

Can be used with gasoline, ethanol, extended gasoline, oxidized sour gas, diesel fuel, biodiesel (B5, B10, B20) and lubrication oil

Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"

For meausring fuel pressureFor meausring fuel pressure, automotive air line pressure or automotive sensor transmission, T-Fitting adapter allows users to install in the fuel line

Size: 1-1/2" dial size, center back, 8mm (5/16") Brass Barbed T-Fitting Adapter, 2 Stainless Steel Clamp with handle

Pressure Range: 0-15psi single scale