Best Evolution in 2026

Easily cuts mild steel, aluminium, plastic, wood and wood with nails

High grade carbide teeth, offer increased durability

High quality blade manufactured in Japan

Easily cuts mild steel, aluminium, plastics and wood

High grade carbide teeth, offer increased durability

Premium quality blade manufactured in Japan

Designed to cut a wide range of materials without changing blades

Clean, consistent and smooth cutting with Left and Right 0° – 45° bevel tilt and 50-50 miter angles

Compatible with Evolutions Miter Saw Stand (EVOMS1)

Free Pilot Pin Included

3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses

Made of M2AL High Speed Steel

HEAVY DUTY, DIE-CAST ALUMINUM ALLOY BASE, CHIP COLLECTION – The S380CPS is Evolution’s flagship saw for industrial metal cutting; featuring the greatest cutting capacities, built from the toughest materials AND with on-board chip collection. With a powerful 15 Amp motor the S380CPS flies through mild steel like a hot knife through butter.

DRY-CUT, COOL TO TOUCH, BURR-FREE CUTS – The included premium tungsten carbide-tipped blade for mild steel cutting represents the latest in dry cut technology, significantly outperforming abrasives. Virtually eliminates sparks! Cuts your metals squarely and smoothly every time providing an instantly workable finish.

FITS TWO BLADE SIZES, MULTIPLE BLADE OPTIONS – Only the S380CPS lets you switch out the included 14” blade for a 15” to maximize cutting capacities. We also offer a wide range of blades for cutting everything from aluminum to 302-304 stainless steel.

TOUGH AND PORTABLE – With a powerful 15 Amp motor and lighter, pressed steel base the S355CPSL has all the power you expect but with the portability you need. A chip deflector directs chips away from the operator and reduces cleaning time.

DRY-CUT, COOL TO TOUCH, BURR-FREE CUTS – The included premium tungsten carbide-tipped blade for mild steel cutting represents the latest in dry cut technology, significantly outperforming abrasives. Virtually eliminates sparks! Cuts your metals squarely and smoothly every time providing an instantly workable finish.

MITER SAW 0-45° ANGLE CAPABILITY – Make angle cuts effortlessly. Features a cast steel vise and fence with quick-release mechanism for safe, accurate and fast clamping of the workpiece.

Vented to reduce inside helmet temperatures

Meets ANSI/ISEA Z89.1-2009, type I, class C requirements

High-density polyethylene (HDPE) shell with a full brim providing additional protection against sun, glare, rain and falling debris

Designed specially to cut stainless steel

60 tooth configuration enables fast efficient cuts

High-grade carbide teeth, offering increased durability

Unique saw fixings allow for fast and secure fitting of almost any chop saw.

Bespoke table height setting with adjustable legs from 595 - 815mm.

Left & right extendable work arms support workpieces up to 3m long! Even includes built in end stop.

Product 1: Unique saw fixings allow for fast and secure fitting of almost any chop saw.

Product 1: Bespoke table height setting with adjustable legs from 595 - 815mm.

Product 1: Left & right extendable work arms support workpieces up to 3m long! Even includes built in end stop.

Evolution saw blades are designed to deliver maximum performance by using the highest grade Carbide, Hardened blade Bodies, and ultra high-grade brazing techniques

All offer premium quality

Designed to increase performance..-Note: Designed for use with Evolution saws or other low RPM saws.

Max RPM 4000

40 Carbide Teeth, .078-Inch Kerf

5/8-Inch Arbor Size..-Note: Designed for use with Evolution saws or other low RPM saws.

Evolution saw blades are designed to deliver maximum performance by using the highest grade Carbide, Hardened blade Bodies, and ultra high-grade brazing techniques

All offer premium quality

Designed to increase performance..-Note: Designed for use with Evolution saws or other low RPM saws.

Max RPM 3900

40 Carbide Teeth, .078-Inch Kerf

20mm Arbor Size..-Note: Designed for use with Evolution saws or other low RPM saws.

3900 RPM

36 Carbide Teeth, .078-Inch Kerf

20mm Arbor Size. Note: Designed for use with Evolution saws or other low RPM saws.

1600 RPM

60 Carbide Teeth, .083-Inch Kerf

1-Inch Arbor Size, -Note: Designed for use with Evolution saws or other low RPM saws.

1600 RPM

80 Carbide Teeth, .094-Inch Kerf

1-Inch Arbor Size, -Note: Designed for use with Evolution saws or other low RPM saws.

Max RPM 3000

52 Carbide Teeth, .078-Inch Kerf

1-Inch Arbor Size, -Note: Designed for use with Evolution saws or other low RPM saws.

Metal Cutting Circular Saw Blades

For Cutting Stainless Steel

90 Tooth Carbide Tipped Blade - 14 in (1 in arbor)..,-Note: Designed for use with Evolution saws or other low RPM saws.

Dry metal cutting Chop saw; cuts metal with minimal heat or sparks and doesn't require coolant

1800 watt / 15 amp motor with high torque gearbox; reduces motor load and improves steel cutting performance

Heavy duty cast aluminum base; for industrial metal cutting

Without changing blades, This saw is designed to cut a wide range of materials

Powerful 10 amp hi-torque motor with optimized gearbox & blade system

Includes laser guidance, 10 ft power cord, 3 piece Clamp, integrated carry handles, and dust bag

Cuts through steel, aluminum, wood, and plastic.

9-Inch Diameter

Drycut technology

Easily cuts mild steel, aluminium, plastic, wood and wood with nails

High grade carbide teeth, offer increased durability

High quality blade Manufactured in Japan

1/2" Diameter x 2" Depth of Cut

M2AL High Speed Steel

3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses

1-5/8" Diameter x 2" Depth of Cut

M2AL High Speed Steel

3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses

27/64" Diameter x 1" Depth of Cut

M2AL High Speed Steel

3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses

[Heavy Duty] – Built to stand by you on the toughest job sites, the Evolution S28MAG has a powerful 10A motor and durable double dovetail slide to guarantee long lasting precision.

[Powerful 2-Stage Magnet] – With 2860 lbs of holding force, this machine isn’t moving an inch. 2-stage magnet allows you to accurately position the machine to drill the perfect hole.

[On-board Coolant] – Coolant bottle with quick push fit tube connection included for long cutter life and smooth drilling.

7/8" Diameter x 1" Depth of Cut

M2AL High Speed Steel

3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses

1-1/8" Diameter x 2" Depth of Cut

M2AL High Speed Steel

3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses

5/8" Diameter x 1" Depth of Cut

M2AL High Speed Steel

3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses