Best 12 Inch Circular Saw Blades in 2026

Thin kerf for fast and smooth cutting action

Computer balanced plate reduces vibration for improved accuracy and better finish

Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy

For use with miter saws

Shear-face grind design delivers effortless cuts with a reduced amp draw on tools for less material waste and to help maximize tool performance

Laser-cut stabilizer vents trap noise and vibration and stabilizes the blade

The product is 12x80t Diablo blade

Easy to use

The product is manufactured in Italy

UP TO 3X LIFE and UP TO 2X LIFE** - Designed For Increased Accuracy***

Patented Body Slot Design for Low Vibration

Optimized Tooth Geometry Designed For Increased Accuracy

Specs: Arbor 1", Diameter 12", Grind ATB, Hook Angle 10°, Kerf .116", Plate .098", Teeth 96

Freud’s exclusive blend of TiCo Hi-Density Carbide is specifically designed for each cutting application to maximize cutting life and material finish

Alternate Top Bevel (ATB) 38-degree tooth with positive cutting angle

The ATB Grind + Rakes tooth Design Allows For Straighter Rips And Improved Performance

Freud's Tic Hi-Density Carbide For Extreme Durability And Cutting Life Up to 4 Times Longer Than Standard Carbide

Cuts Like A Hot Knife Through Butter

Freud's limited lifetime

12X8 PCD FIBER CEMENT BLADE

The PCD triple chip design offers up to 60 times longer cutting life than standard carbide blades

Real industry quality level with elegant and simple design, C4 construction grade tungsten carbide teeth provide maximum resistance for 3X longer life

Ideal for ripping & crosscutiing in softwood, hardwood, chip board and plywood with fine finishing

For use on Miter Saws and Table Saws, Max RPM 5,000

Arbor: 1"-7/8" bushing, Segment height .395"(10mm). Size is 12"x.115"x.395"/10mm.

Hot-pressed sintered blade: The grain of diamond will not become larger, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high.

Main features: The product is 12" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal.

Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts

Exclusive, patent-pending toughtrack tooth design for accurate tracking over the life of the blade

Made from high-density tungsten Carbide for toughness, wear-resistance, and long life

Tough coat anti-stick coating reduces friction and gumming

Featuring both a 32-tooth blade for general woodcutting and a 80-tooth blade for fine-finish woodworking

Blades measure in at 12-inch diameter (305 mm) with a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM

Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts

▲Material: OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other blades

▲Thin kerf: Thin kerf or fast and smooth cutting action and minimum waste

▲Low Noise & Cutting Stable: 12 Laser cut expansion slots and 8 Laser-cut stabilizer vents trap noise and vibration, keeping it cool and reducing blade warp

UP TO 3X LIFE*- Designed For Increased Accuracy**

Patented Body Slot Design for Low Vibration

Optimized Tooth Geometry Designed For Increased Accuracy**

DIMENSIONS - Includes 1pc 12*1*32T & 1pc 12*1*80T TCT circular saw blade.

APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain.

MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts.

[Warm Reminder]: The installation slot of this tile blade fit with 2 arbor sizes, 5/8" or 7/8". The central ring core can be installed or removed to fit different hand-held angle grinder saws

[Wet & Dry Cutting]: The tile saw blade 7" works on most hand-held angle grinder saws, air cut off tool and electric cut off tool with arbor size 7/8" or 5/8" , universal for dry or wet cutting

[Excellent Tile Blade]: GoYonder diamond blade comes with X teeth rim adge, offer fast and smooth cutting,1.4mm thickness runs smooth fast and quiet actually

Specs: Arbor 1", Diameter 12", Grind ATB, Hook Angle -5°, Kerf .090", Plate .071", Teeth 72

Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance

Negative Hook Angles minimizes climbing for better control

Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.8 mm) provides clean and efficient cuts

1600 RPM

60 Carbide Teeth, .083-Inch Kerf

1-Inch Arbor Size, -Note: Designed for use with Evolution saws or other low RPM saws.

Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts

Miter Saw Blade ideal for ripping, cross cutting, and miter cutting on hardwood, softwood, lumber, plywood, hardboard, MDF, and more; not designed for cutting steel or iron

Includes (1) 100-tooth blade made of tungsten carbide and alloy steel

Laser cut to maintain strength and precision and to minimize noise and vibration, which helps keep the blade cool

High performance aluminum oxide grain for long life and high material removal of the metal cutting disc

High grain concentration of the cutting wheel is made for aggressive cutting action and smoother running wheels

2 full sheets of thicker fiberglass to withstand extreme applications and hold up to high speeds

10pcs Saw Blade Bush / Spacer, Saw Blade Bushing Washers

1"-20mm, 1"-5/8", 7/8"-5/8", 20mm-5/8", 5/8"-1/2"

Thickness: 1.3mm

Professional Grade C-1 Carbide

Negative Hook Angle

Triple Chip Tooth Grind

Benchmark Abrasives 12" TCT saw blade is ideal for cutting non-ferrous metals such as aluminum, brass, copper, and bronze, as well as plastics, plexiglass, PVC, acrylics & fiberglass, etc.

They are crafted using tough and tempered high-density steel, which makes them solid and durable. The TCT blade for aluminum cut longer than abrasive blades.

Our TCT saw blades are designed to meet industrial standards and offer smooth cutting performance. They are suitable to use with saws of various brands.

1-Inch to 5/8-Inch Saw Blade Bushing

1-Inch to 5/8-Inch Saw Blade Bushing

1-Inch to 5/8-Inch Saw Blade Bushing

Fit 12" Craftsman Band Saw Made of prime quality carbon steel

Wood and general purpose cutting

Unique welding technique :strong and smoother welding point

These 80 inch Bandsaw Blades Can Fit 12" Craftsman Band Saw Made of prime quality carbon steel

Wood and general purpose cutting

Unique welding technique: strong and smoother welding point

12X96X1 DIABLO BLADE

12X96X1 DIABLO BLADE

12X96X1 DIABLO BLADE

▲Standards - Blade Diameter - 12 inch, Teeth qty - 60T, Arbor Size - 1 inch, Blade Speed - RPM 5000 max

▲Material - OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades

▲Alternate Top Bevel Teeth - The 12 inch saw blade with unique tooth design provides straight cuts and cutting smoother