Best Cmt Circular Saw Blades in 2026

Specs: Arbor 5/8", Chippers (3)1/8" Chippers, (3)spacers, Diameter 6", Teeth 10

Negative hook angles

Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance

DIMENSIONS - Includes 1pc 7-1/4 Inch 24T Framing Saw Blade, 1pc 7-1/4 Inch 40T Ripping & Cross Cutting Saw Blade, 1pc 7-1/4 Inch 60T Finish Saw Blade, 5/8 inch Arbor, with a nice storage case.

DURABLE: OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life.

EFFECTIVE: Incorporates an ATB (Alternating Top Bevel) offset tooth design, sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results.

For fast rip cuts on soft/hardwood thanks to the thin kerf design.

To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. Good on plywood.

0.102 kerf thickness, 0.071 plate thickness, 10° Hook Angle, alternate teeth Grind.

DIMENSIONS - Includes 1pc 12*1*32T & 1pc 12*1*80T TCT circular saw blade.

APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain.

MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts.

Makes biscuit joining quickly and easily

High-grade German steel and 8 micrograin carbide-tipped teeth guarantee years of use.

Fits Lamello, DeWalt, Skil, Bosch, Freud and other popular biscuit joiner models.

For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.

Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.

0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 4/20° alternate teeth Grind.

Brute Carbide – an upgraded C3/C4 micro grain formulation for increased impact damage resistance

ATB tooth geometry – for fast cross cutting, cutoff and trim of wood and plywood

SpeedCoat – an antifriction finish for faster cutting with no burning or melting

For for fast, smooth, heavy-duty rip cuts on soft/hardwood Good performance on plywood

To be used on radial arm saws, miter saws, table and special saws

Technical details: kerf thickness 0126, plate thickness 0087, 20° hook angle, FTG -Flat Top Grind

For crosscuts, fine finish on two-sided laminates without using scoring blades

Use on radial arm, miter and table saws for cutting wood, moldings, melamine, laminates, chipboard

0.094 kerf thickness, 0.063 plate thickness, 10Degree hook angle

Brute Carbide – an upgraded C3/C4 micrograin formulation for increased impact damage resistance and long life

Triple chip grind tooth geometry – designed for delivering maximum performance and high quality of finishing in highly abrasive materials

Extra-hard steel blade body – delivers accuracy and resists bending and deflection for true cuts

For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.

For radial arm saws, miter saws, table & special saws. Cut soft and hardwood, plywood & chipboard.

0.126 kerf + 0.087 plate thickness, 12° hook angle, 4 alternate teeth, 1 trapezoidal tooth Grind

for rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance.

Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood.

0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 1 Flat and 4 Alternate Teeth grind.

For fine finish crosscuts. Glass-smooth finish on your miter cuts.

Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.

0.098 kerf thickness, 0.071 plate thickness, 5° Hook Angle, 40° Alternate Teeth Grind.

For fast crosscuts on wood and plywood. Good rip cut on wood.

To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood.

0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind.

For fine finish crosscuts. Glass-smooth finish on your miter cuts.

Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.

0.110 kerf thickness, 0.087 plate thickness, 5° Hook Angle, 40° Alternate Teeth Grind.

Specification - Includes 3pc 7-1/4”*5/8*24T Circular Saw Blades.

Material - Fully hardened steel body allows Circular Saw Blades more stable and precise when cutting. Combined with Tungsten carbide teeth for high abrasion and heat resistance, making cutting easier and more efficient.

Technology - Adopting an ATB (alternating top bevel) offset tooth design, the angle of the tooth scores the wood surface before cutting, cutting the wood fibers cleanly before the following teeth remove the wood chips. The alternating left and right teeth can achieve a more even cutting efficiency and a smoother cut.

For crosscuts. Excellent cut with perfect finish on two-sided melamine, wood and plywood.

To be used on portable and cordless circular saws.

0.069 kerf thickness, 0.043 plate thickness, 5° cutting angle, 10° ATB+Shear grind.

For smooth finish crosscuts. Faster cuts thank to the special ground teeth.

Cuts lumber, plywood, OSB sheets. To be used on portable and cordless circular saws.

0.069 kerf thickness, 0.039 plate thickness, 20° hook angle.

Makes biscuit joining quickly and easily

High-grade German steel and 6 micrograin carbide-tipped teeth guarantee years of use.

Fits Virutex and Porter Cable machines.

For making clean edges, square shoulders & flat bottoms. Splinter-resistant cuts in all wood.

Ideal for underpowered saws.

0.125 kerf thickness, 0.098 plate thickness, -12° hook angle, Flat Tooth + Alternate Tooth.

For fine finish crosscuts. The 5° negative hook limits splintering and "climbing".

Use on radial arm saws & sliding compound miter saws for cutting soft/hardwood, plywood & laminates.

0.118 kerf thickness, 0.098 plate thickness, -5° hook angle, 4ATB + 1 trapezoidal tooth Grind.

For framing/decking & general construction. Faster cuts thanks to the special teeth geometry.

For cutting lumber, plywood and OBS sheets. To be used on portable and cordless circular saws.

0.069 kerf thickness, 0.043 plate thickness, 20° hook angle, 10° ATB+Shear grind.

For smooth finish crosscuts. Faster cuts thanks to the special teeth geometry.

For cutting lumber and plywood. To be used on portable and cordless circular saws.

0.069 kerf thickness, 0.043 plate thickness, 18° cutting angle, 10° ATB+Shear grind.

Legend: D = Diameter (inches and/or mm) T = Tooth Count B = Bore (inches or mm) K = Tooth Thickness (inches) P = Blade Thickness (inches)

High Quality Saw Blades for Accurate and Precise Cuts

Steel Plate of Blades are Laser Cut then Polished and Tensioned

Heavy-duty cutting, smooth finish with no melting. For radial arm saws, miter/table, special saws.

Cut thin plastic, phenolic, plexiglass, vinyl, laminate flooring and plywood.

0.110 kerf thickness, 0.087 plate thickness, -3° hook angle, Alternate top bevel with chamfer grind.

Legend: D = Diameter (inches and/or mm) T = Tooth Count B = Bore (inches or mm) K = Tooth Thickness (inches) P = Blade Thickness (inches)

High Quality Saw Blades for Accurate and Precise Cuts

Steel Plate of Blades are Laser Cut then Polished and Tensioned

For very long-lasting cuts, up to 60 times longer than carbide blades.

For portable circular saws/miter saws. Cut fiber cement & plasterboard.

0.083 kerf thickness, 0.063 plate thickness, 12° hook angle, Trapezoidal Grind.

0.102 kerf thickness, 0.062 plate thickness, 10Degree hook angle, 15Degree ATB grind, 2/6/32 pin hole.

For crosscuts. Perfect finishing.

Cut soft, hard and exotic wood,wood-based panels, one-sided veneered, paper-based laminated.

Legend: D = Diameter (inches and/or mm) T = Tooth Count B = Bore (inches or mm) K = Tooth Thickness (inches) P = Blade Thickness (inches)

High Quality Saw Blades for Accurate and Precise Cuts

Steel Plate of Blades are Laser Cut then Polished and Tensioned

For fast cutting through iron, steel pipe, metal rods and sheet metal. Suggested RPM: 4100~8000

For low RPM metal chop saws, such as Jepson. Cut iron, steel pipes, metal rods, sheet metals.

0.079 kerf thickness, 0.063 plate thickness, 0° hook angle, Trapezoidal tooth Grind.