Best Cmt in 2026

Cutting depth 1/8 to 1/2-Inch by replacing bearing, 1-3/8-Inch Diameter & 3/4-Inch Cutting Length.

For rabbeting of different size on wood and wood composites.

Anti-kickback design.

For fast rip cuts on soft/hardwood thanks to the thin kerf design.

To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. Good on plywood.

0.102 kerf thickness, 0.071 plate thickness, 10° Hook Angle, alternate teeth Grind.

Makes biscuit joining quickly and easily

High-grade German steel and 8 micrograin carbide-tipped teeth guarantee years of use.

Fits Lamello, DeWalt, Skil, Bosch, Freud and other popular biscuit joiner models.

For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.

Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.

0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 4/20° alternate teeth Grind.

1-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation

Premium Quality Solid Carbide, Excellent finish on the workpiece lower side Upward chip ejection

For cutting, copying, sizing and routing wood products, plastic & laminates

Fits most popular mortising jigs

Mortise perfect hinges with no splintered edges or rough bottoms

Manufacturer: Cmt

3/4-Inch Diameter, 4-5/16-Inch Overall Length

2 carbide cutting tips for long-lasting performance

Down shear design allows for clean smooth cuts on many materials

1/2-Inch Cutting Diameter, 2-9/64-Inch Length Ideal on plastic laminates and aluminum laminates

Super-strength superior steel, Non-Stick Orange Shield Coating

2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges

3-35/64-Inch Overall Length, Right-Hand Rotation.

2 spurs, 2 precision ground cutting edges, long-lasting cutting performance

Drill precise flat bottom holes with no chipping in any thickness of soft wood

3/4-Inch Cutting Diameter, 4-5/16-Inch Length, Bearing Included

Super-strength superior steel, Non-Stick Orange Shield Coating

2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges

For for fast, smooth, heavy-duty rip cuts on soft/hardwood Good performance on plywood

To be used on radial arm saws, miter saws, table and special saws

Technical details: kerf thickness 0126, plate thickness 0087, 20° hook angle, FTG -Flat Top Grind

Made of heavy-duty steel.

1/2-Inch Shank for 1/2-Inch collets.

3-15/32-Inch overall length.

One (1) Year Warranty

Heavy Duty Construction

Not Sold By the Dealership Separately!

Rout safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms.

Easy to screw on wooden panels, MDF or chipboard for creating forms, arcs and curved elements.

Made of a highly-resistant flexible plastic, that can be tied in knots without reducing flexibility.

For crosscuts, fine finish on two-sided laminates without using scoring blades

Use on radial arm, miter and table saws for cutting wood, moldings, melamine, laminates, chipboard

0.094 kerf thickness, 0.063 plate thickness, 10Degree hook angle

Makes biscuit joining quickly and easily

High-grade German steel and 6 micrograin carbide-tipped teeth guarantee years of use.

Fits Lamello, DeWalt, Skil, Bosch, Freud and other popular biscuit joiner models.

For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.

For radial arm saws, miter saws, table & special saws. Cut soft and hardwood, plywood & chipboard.

0.126 kerf + 0.087 plate thickness, 12° hook angle, 4 alternate teeth, 1 trapezoidal tooth Grind

for rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance.

Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood.

0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 1 Flat and 4 Alternate Teeth grind.

For heavy-duty crosscuts, perfect finishing on single-sided laminated panels.

For radial arm saws, miter/table & special saws. Cut chipboard, MDF, laminate, hardwood & plywood.

0.126 kerf thickness, 0.087 plate thickness, 10° hook angle, Trapezoidal tooth Grind.

For fine finish crosscuts. Glass-smooth finish on your miter cuts.

Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.

0.098 kerf thickness, 0.071 plate thickness, 5° Hook Angle, 40° Alternate Teeth Grind.

3/8-Inch Cutting Diameter, 2-11/16-Inch Length, Bearing included

Super-strength superior steel, Non-Stick Orange Shield Coating

2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges

For fast crosscuts on wood and plywood. Good rip cut on wood.

To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood.

0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind.

3-35/64-Inch Overall Length, Right-Hand Rotation.

2 spurs, 2 precision ground cutting edges, long-lasting cutting performance

Drill precise flat bottom holes with no chipping in any thickness of soft wood

For fine finish crosscuts. Glass-smooth finish on your miter cuts.

Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.

0.110 kerf thickness, 0.087 plate thickness, 5° Hook Angle, 40° Alternate Teeth Grind.

1-1/4-Inch Cutting Length, 2-3/4-Inch Length, Equipped with Bearing

Smooth and precise cut Exceptional chip ejection to allow cleaner and more constant cutting

2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges

For crosscuts. Excellent cut with perfect finish on two-sided melamine, wood and plywood.

To be used on portable and cordless circular saws.

0.069 kerf thickness, 0.043 plate thickness, 5° cutting angle, 10° ATB+Shear grind.

For fast extra-clean crosscuts and occasional rip as well on wood and plywood.

To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood.

0.102 kerf thickness, 0.071 plate thickness, 15° Hook Angle, alternate teeth Grind.

3 straight bits featuring the following cutting diameter: 15/64, 31/64 and 21/32 inches

For making perfectly matching joints on plywood

Super-strength superior steel, Non-Stick Orange Shield Coating.

For fine finish crosscuts. Glass-smooth finish on your miter cuts

To be used on compound miter saws for cutting soft/hardwood, plywood and two-sided laminates

0.102 kerf thickness, 0.071 plate thickness, 7° Hook Angle, alternate teeth Grind

For fast extra-clean crosscuts and occasional rip as well on wood and plywood.

To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood.

0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/20° alternate teeth Grind.