Best Ez Supply in 2026

[LOAD CAPICITY] - This industrial Pallet Jack, lift capacity is 5500Lbs.

[EASY OF USE]- Pallet Jack entry/exit is enhanced with rollers, exit ramp & tapered fork tip design.

[CONTROL] - 3-function hand control operation (raise, neutral and lower).

pallet jack stop, jack stopper, heavy duty jack stop

【PREMIUM AND DURABLE RUBBER】: The pallet jack chock is made of high-quality rubber. The wheel gear is resistant to oxidation, has a high bearing capacity, is resistant to friction, and is durable.

【ANTI-SLIP CHASSIS】: Scientifically designed pallet stopper with anti-slip bottom. No matter what the environment and the weather, it can better avoid the danger of rolling.

【STABILITY】: Fix the wheel in the hole of the heavy-duty pallet jack chock belt to maintain the stability of the vehicle and cargo and avoid damage.

Pallet Jack / Truck Steer Wheels Replacement Poly on Steel Red Grade A

EFFORTLESSLY PULL PALLETS: Attach this heavy duty pallet puller to any pallet (wood, polyethylene plastic, steel, aluminum, cardboard, etc.) in order to drag it to the rear of a trailer for easy forklift truck access; Puller has a single scissor design to allow for a wide jaw opening; 10 teeth on either side of jaw to easily grab pallets; As you pull, the puller will increase the grip on the pallet plank for safe movement; For pulling only; Not intended for lifting

LARGE SIZE: Rated to pull 6,000 pounds (2,722kg) of cargo across a smooth surface or floor; 6-inch (15.2cm) jaw opening (measured from tooth point to tooth point) opens wide enough for large jobs; 2.9-inch x 1.9-inch (7.4cm x 4.8cm) jaws with 0.4-inch (1cm) long teeth; Overall dimensions 19.25-inch to 13.75-inch (48.9cm to 34.9cm) length; 11-inch to 13.25-inch (27.9cm to 33.7cm) width; 3.4-inch (8.6cm) thickness; Best suited to grip planks ranging from 1.25-inch to 4-Inch (3.2cm to 10.2cm) thick

USE YOUR CHAIN OR STRAP: 2.25-inch x 1.3-inch (5.7cm x 3.3cm) inside diameter (ID) end loop will connect to your 1/4-inch GR 43 proof coil chain or strap with a grab hook and attach to your forklift truck to pull a loaded pallet to a convenient spot for lifting, transporting, or unloading

Stop for holding pallet truck still in a moving truck or trailer.Handle for carrying

Just pull it into this Pallet Truck Stop and it's parked in less than 2 seconds

Special design at the bottom to increase friction on the ground and the chassis is supported by the stop

COMPACT & FOLDABLE - Are you tired of big, clunky carts that take up precious space? That’s why we designed a functional platform push cart that can be tucked away for easy storage, but ready and available for when you need it. Simply fold down the padded handle in seconds to lay flush on the platform and your cart is ready to stowaway whenever, wherever.

EASILY MANEUVERABLE - This four wheel platform push cart is built for easy maneuverability and maximum stability. The four secure, heavy duty wheels offer seamless and reliable transportation for your items and materials. And for sharp angles and getting around corners, the two back wheels are engineered with 360-degree swivel functionality for easy transit.

MAXIMUM SUPPORT - We want you to be able to handle your materials and items with confidence. That’s why we’ve engineered a push cart that can hold up to 330lbs. The custom support guard ensures items won’t slip backwards and arrive safely to where they need to be.

Pallet Jack / Truck Load Wheels Replacement Poly on Steel Red Grade A

[Stabilize Pallet Jack] Fix the pallet truck wheel in the heavy-duty pallet jack chock to limit wheel movement, safer and more efficient handling of goods

[Durable Pallet Stopper] Made of heavy-duty rubber, special treatment on the bottom enhances friction and further improves the stability of the pallet jack during load, pallet truck is fixed in place. Suitable for standard and heavy duty pallet jack

[Pallet Stopper Details] Heavy-duty pallet jack chock measure 14.2 x 11.2 x 2 inches and its weight is 3.5lbs. Lightweight and durable, easy to carry, suitable for handling operations

Stop for holding pallet truck still in a moving truck or trailer.Handle for carrying

Just pull it into this Pallet Truck Stop and it's parked in less than 2 seconds

Special design at the bottom to increase friction on the ground and the chassis is supported by the stop

Stop for holding pallet truck still in a moving truck or trailer.Handle for carrying

Just pull it into this Pallet Truck Stop and it's parked in less than 2 seconds

Special design at the bottom to increase friction on the ground and the chassis is supported by the stop

Pallet Jack / Truck Load Wheels Replacement Poly on Steel Black Grade A

DELUXE VERGO PALLET BUSTER: The perfect tool for a variety of projects, use the pallet breaker tool to pry apart pallets, remove wooden boards, and reclaim wood for future projects. No need to use a hammer or a crowbar.

EASY TO USE - Simply slide the pallet buster tool in between the wooden plans and apply pressure to the handle. Effortlessly remove wooden planks, boards and break down pallets. Vergo deck wrecker comes with a forking head that allows you to apply pressure evenly helping to minimize damage to the boards.

PORTABLE - The pallet dismantling bar is ready to use in just a few steps, collapsible design can be taken apart for storage. Our pallet tool is made up of 4 pieces, Use the provided hardware to assemble the 3 piece handle and secure the handle to the forking head using the locking pin.

Stop for holding pallet truck still in a moving truck or trailer.Handle for carrying

Just pull it into this Pallet Truck Stop and it's parked in less than 2 seconds

Special design at the bottom to increase friction on the ground and the chassis is supported by the stop

AVOID DAMAGE: As its main function and purpose, the jack stop holds the pallet securely in place in any moving vehicle.

LIGHTWEIGHT: Weighing in at 5.3 pounds, it’s easily storable and transportable.

QUALITY MATERIAL: We use high quality rubber to create resistance so the pallet doesn’t slip and slide, no matter the weather or condition.

Pallet Jack / Truck Steer and Load Wheels Replacement Set Poly on Steel Red Grade A

Compalete with Back Steer Wheels Axle and fastners

Pallet Jack / Truck Steer and Load Wheels Replacement Set Poly on Steel Black Grade A

Compalete with Back Steer Wheels Axle and fastners

Pallet Jack / Truck Steer Wheels Replacement Poly on Steel Red Grade A

Sping Loaded Loop Handle - Loop handle is spring loaded to return to upright position and eliminate bending to retrieve.

27"W x 48"L Forks - Fork width: 6"; Raised height: 7-3/4"; Lowered height: 3"

3" Non Marring Load Roller, 7" Polyurethane Steer Wheels (Offers a 190° steering arc)

Pallet Jack / Truck Load Wheels Replacement Poly on Steel Red Grade A with Entry Exit Rollers

👍【2204LBS Maximum Capacity】：This pallet puller is made of thicker alloy steel，which can easily pull goods weighing less than 1T/2204 lbs.

👍【Easy-pull Design】: The pallet buster is easy to pull the pallet onto the trailer door. The scissor design increases the grip as the applied pulling force increases. The single scissors action allows a wider jaw opening

👍【Unique Convex Tooth Chuck】: 10 steel convex teeth on both sides of the jaws can easily grab the tray, with strong bite and not easy to fall off. The jaws can be opened up to 5" wide. Its pulling force is 2204 Lbs

[Fits 4.5’’ Wide Forklifts]: Features 96’’ length and 4.8’’ width that is suitable for 4.5’’ wide pallet forks; Extends the original fork’s size to carry more cargo per lift.

[Durable Alloy Steel]: Made from high tensile steel for premium strength and durability; Enables most lifting tasks in a warehouse or building site; Surface spray painting technology provides efficient rust and corrosion protection.

[Effortless Installation]: This pallet fork extension can be easily installed by one person without any tools required; Just slide the extension onto your pallet forks and you’re all set.

Pallet Jack / Truck Steer and Load Wheels Replacement Set Poly on Steel Red Grade A

Pallet Jack / Truck Load Wheels Replacement Poly on Steel Black Grade A

Pallet Jack / Truck Load Wheels Replacement Poly on Steel Black Grade A

Replacement of pallet jack wheels located towards the front of the pallet jack forks and fit most standard pallet jack trucks.

Wheel Diameter: 2-7/8"; Wheel Width: 3-3/4"; Bearing ID: 20mm or 3/4". This particular wheel size is very common for import pallet jacks.

A pair of pallet jack load wheels feature a high grade 95A durometer black polyurethane ensures good performance and lasting use.

21"W x 48"L Forks, 3" Lowered Height, 7-3/4" Raised Height

3" Non Marring Load Roller, 7" Polyurethane Steering Wheels

6"W Tapered Forks

Load capacity: 3300lbs | Lithium Battery Capacity : 24V/20Ah

Mini type with same size as hand pallet truck, Fork size 48”x27”.

Charging Time : 3 hours, Working Time : 3 hours.

OTC's 1,500 lb. Truck Dual Wheel Dolly features a built in jack that provides almost 6-1/2 inches of lift and a jackscrew that tilts wheel assemblies up to 7 degrees to prevent damage to wheel seals

Removes, transports, and installs heavy dual wheel and tire assemblies without strain or struggle, saving you time and effort, while practically eliminating the chance of back injuries

3 swivel casters (3 inch rear, 3-1/2 inch front) ensure easy manuevering of the loaded or unloaded dolly into the exact position needed for use

Lightweight portable lifts are great for hundreds of applications

Manual cable winch easily raises and lowers forks

Counterbalance weight design keeps unit from tipping with heavy loads