Best Farnavi in 2026

Stainless steel face and plastic body prevent rust.

Size: 1.77'' width x 0.75'' long nipple. Please kindly check its size before buying.

Thickness of sink should be LESS than 0.4 inch. (This is NOT long enough for granite counter tops.)

Connections: G1/2". Please kindly check the thread is suitable for your use before buying.

This valve is designed for single cold automatic faucet, with it you can use hot and cold water. (without shut on/off function)

By rotating the knob of this valve you can adjust water temperature easily.

Chrome finish is highly reflective for a mirror-like look that works with any decorating style.

Faucet total height: 4.5'';Spout height: 1.4''; Length:4.7''. Please check the size before buying.

1 Lever handle is designed for ease use of water flow & temperature adjustments.

Better quality: Just net weight of single faucet is around 1.7 lbs(0.75KG); Solid brass construction for reliability and long lasting performance.

Simple operation: When sensor is activated, the faucet will automatically supply water once hands are within sensing range, and stop when you move away your hands. Notice: this is a single cold faucet.

Dual power: This faucet can be powered with either 4-AA batteries (not included) or plugged into a 110v outlet.

DIMENSIONS: 27-1/2" x 13-1/2" x 1-1/4"

CUSTOM SIZED: Designed to cover the bottom of specific Elkay sink bowls.

CORROSION RESISTANT: Constructed of solid stainless steel to resist corrosion.

Standard size 3-1/2inches opening: Fits for most American families / commercial kitchen sink. It can fit for sink with 3.23inches - 4.45inches opening. The height of this kitchen sink drain is 3.85-inches. Please measure if it is fit with existing plumbing before buying.

Well made 304 stainless steel construction, except plastic nut (Metal nut will corrode, bonding the nut to the strainer) and brushed nickel finish.

The removable separate deep basket prevents debris from clogging drain pipe. ( NOTE: It can not be connected to the garbage disposal.)

Stainless steel face and plastic body prevent rust.

Size: 1.77'' width x 0.75'' long nipple. Please kindly check its size before buying.

Thickness of sink should be LESS than 0.4 inch. (This is NOT long enough for granite counter tops.)

Universal accessory

Fits most double bowl sinks w/ rear drains

PVC feet elevate grid from surface

DURABLE CONSTRUCTION: Bottom sink grid is made from premium stainless steel material

HEAVY DUTY: Extra thick construction, sturdy wire frame, and rubber feet ensure protection against scratches

SCRATCH-FREE: Vinyl feet and side bumpers protect sink from scratches

The Waste King EZ Mount twist-and-lock design provides a fast and easy way to install your disposal

Removable splash guard prevents any unwanted items from the sink from going down the drain or into the disposal

Flange kit is compatible with most existing EZ Mount garbage disposals including Waste King and Whirlaway

Best way to repair an undermount sink --- A once-for-all effort for you because this product sets you free for good from having to frequently fix your falling sink. Enjoy your cooking without worrying about your sink.

Easy to install --- No need to remove the sink to install this product. All you need is an electric wrench and screws to fix the base of the bracket, and tighten the hexagon threaded rods until the entire bracket is firmly thrust against the edge of the sink. The attached manual gives detailed step-by-step descriptions.

Strong steel --- A perfect bracket for undermount single/double bowl sink. Even a double bowl sink fully loaded with water does not swing when supported with this bracket. Surface galvanization makes sure this bracket does not grow rust in the humid kitchen conditions and provides prolonged services to you.

Leak-proof cover: the hole cover of stainless steel sink faucet soap liquid device is decoration and leakage prevention, keep the kitchen clean and tidy, preventing water from leaking onto the floor, a useful kitchen accessory

Easy to install: longer threaded shank designed to screw into place for a quick and easy installation, easy to install with no tools required; The silicone holds it firmly in place, no need to worry about it getting loose

Stainless steel material: filled the hole in the granite, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures, not a heavy metal but it works as

Material: our sink faucet hole cover is made of durable stainless steel and plastic, you needn't to worry about rusting and tarnishing, which can be last for a lifetime.

Advantages: quick and easy installation without any tools, just pass the cover through the faucet hole, then under the sink, tighten the bottom screw. It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn't leak. Simple and generous design, make your kitchen look beautiful.

Size: our faucet hole cover is the standard size for most homes; This is suitable for hole sizes between 1.2 and 1.6 inches, the thickness of the sink should be less than 0.4 inches (This is not long enough for granite counter tops), please check the size before purchase.

Drain for stainless sinks

Fits sinks with standard 3-5/8” outlet

Includes lock nut

Chrome finish to create a bright, highly reflective, cool grey metallic look

Extend the handle of your Moen tub/shower

For use with Moen PosiTemp Single-Handle Tub/Shower

EFFORTLESSLY HOLDS UP YOUR SINK: Our sink clips are meant to hold up to 1000lbs to firmly clamp your Undermount Kitchen Sinks & Undermount Bathroom Sinks. (When using a set of 10.)

EASY INSTALLATION: No tools are required or special expertise are needed to install. Just four easy steps to get the job done. (Epoxy not included.)

ANTI-CORROSION COATING: Each sink clip is layered with our protective coating to ensure our quality will last.

DIMENSIONS: 26-3/4" x 16-9/16" x 1-3/8"

CUSTOM SIZED: Designed to cover the bottom of specific Elkay sink bowls.

CORROSION RESISTANT: Constructed of solid stainless steel to resist corrosion.

Overall 9.625" X 13.125" X 0.625"

T-304 stainless steel

Includes plastic feet to protect sink surfaces

Stainless steel: this faucet hole cover is made of durable stainless steel and plastic, you needn't to worry about rusting and tarnishing, which can be last for a lifetime

Easy to install: just put the cover across the faucet hole, then get underneath the sink to tight the bottom screw; It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn't leak

For use in: faucet hole cover is standard size for most households; Please check its size before purchasing, this suitable for hole size between 1.1 to 1.7 inch, thickness of sink should be less than 0.25 inch

HIGHLY DURABLE ---- The BOTEMY Kitchen sink drain kit is all made of 304 heavty duty stainless steel which is built to last. Durable and reliable, rustproof and no leaks.

3-1/2 INCH KITCHEN SINK DRAIN ---- The kitchen sink strainer assembly fits most American standard kitchen sinks with universal 3-1/2 inch standard sink drain hole.

STAINLESS STEEL DRAIN STOPPER ---- Upgrade stainless steel T-knob instead of rubber stopper to ensure longevity and good water sealing. Small and numerous drain holes for quick drainage and anti-clogging.

Kitchen Sink Bottom Grid Dimension: 26 x 14 Inches.

Sink Protector: Soft Protective Bumpers Prevent Sink Surface Scratch.

Sink Rack for Bottom of Grid: Durable Stainless Steel Construction with Flawless Chrome-plated Finish.

EASY TO INSTALL - Install the sink support kit without removing other components of the sink. All you need is an electric tool and an Allen wrench to complete the installation.

SOLID CONSTRUCTION - Made of metal with a thickness of more than 1mm, strong and durable. Sink support surface is galvanized to ensure that it can be used for a long time in a humid environment like the kitchen.

ADJUSTABLE SUPPORT ROD - The support rod is rotatable and can be placed in any position as required. The sink is available even if it is a bit far from the wall.

FITS STANDARD SIZES SINK: This BEHOK sink grid length 28-3/8", width 15-3/8", height 1", with rear drain corner diameter 5" for bottom of sink, fit sinks corner radius R1-1/2". Please notice your sink's size and drain location. (Note: Please measure the inner dimension of your sink. It's VERY IMPORTANT to measure the dimension of your sink bottom at 1 inch height, DON'T from the sink bottom directly.)

MULTI FUNCTION: This BEHOK sink grid can use on many purposes. You can use it as a drain rack, cooling rack, defrosting grid, drying grid, dishware drainer, etc.

HIGH-QUALITY STAINLESS STEEL: Made of food-grade 304 stainless steel, allowing direct contact with food. It’s durable, corrosion-resistant and rust-resistant. Attractive, stainless steel finish gives bottom grid a pristine look that complements all sink materials.

IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you.

Grid dimension: 29-5/8" X 14-7/8" for your sink bottom with Corner Radius 2"

Center Drain LOCATION

100% Authentic Genuine In-Sink-Erator replacement part

Anti-microbial material helps inhibit growth of odor-causing bacteria

Perfect fit for all Evolution Series Dispoals

INCLUDES EVERYTHING YOU NEED TO INSTALL A GARBAGE DISPOSAL

EASY INSTALL - Quick and Simple Installation.

DO IT YOURSELF - Fro Wall Water Supply and Drain

Easy To Install. Flexible Design For Any Space

Smooth Interior Wont Clog

No Leaks

This kit provides universal installation

Allows for two Outlet Connection types: Center or End

Can be connected to the Wall or to the floor

Fits the Orwell (model # SK202-30AC) and David (model # SK203-31AC)

Protects your copper sinks finish and fragile dishes

Rubber feet provide added protection. Integral dish rack : No

Air gap cap with flange and plastic body included

1-3/4 in. cap diameter

2-3/4 in. cap height