Best Fisunny in 2026

10" 3"(75mm) Wide, Sds-Plus Shank, Not Fit The SDS Max., 15 Degree Bending

Sds-Plus Shank, Not Fit The SDS Max.

Made Of Premium 40Rc Steel, Hardness Hrc 50±2, Very Sturdy For Long Time Use.

①：Diameter 7 1/4" (185mm), 24T, Arbor 5/8" with diamond washer. Max Speed RPM 8500, ATB and Thin Kerf is 1/16" (1.6mm)

②：How to choose the number of teeth? It's not that the more teeth, the better. When cutting, keep one to four teeth in the wood at the same time. Too many teeth will cause unsmooth discharge of debris and overheating of saw blade. So the best condition is 24T for 3"-1" Thickness of board, 40T for 1.8"-0.6" thickness of board, 60T for 1.2"-0.34" thickness of board. But of course, beyond the best range saw blade can also be used.

③：High hardness Carbide is design to cut Hard Wood, Plywood, Laminate, MDF, HDF also OK for soft wood, tooth can be regrind when it not sharp, But regrinding requires some skills, so if you don't have confidence in yourself, find an experienced person to help you

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster in concrete (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

The product is 5/8x6x8 SDS Plus Bit

Easy to use

The product is manufactured in China

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

Optimized brazing and hardening process for long life

15 percent faster (compared to S4L)

Bosch-made carbide tip is tougher and more durable under heavy loads

High-performance drill bits with two cutting edges from durable Carbide for durability and good resistance

Content: 7 pcs

Two Spiralizer U-shape for good

✅ MAKITA’S 7 Piece Complete SDS-Plus Drill Bit Set For 1" or Greater SDS+ Chuck Rotary Hammer Drills has 7 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block

✅ 7 Ultra-Duty Makita SDS-Plus Drill Bit Set for Up to 10“ Deep Drilling Depths, including the most frequently used diameters: 1 Bit of 5/32“ + 1 Bit of 3/16” + 1 Bit of 1/4” + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" + 1 Bit of 3/4”, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, 1" or Greater SDS-Plus Hammer Drills

✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling

HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.

Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.

Quick Change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck.

Rapid Material Removal: Their hybrid performance removes material at an exceptional rate while maintaining surface quality ready for final finishing.

Easy to Control: The Rotary Burrs can easily cut with or against the grain with incredibly smooth cutting action. The 1/8" diameter shaft burrs are great for intricate details and small areas. **Must use with 1/8" collet or adjustable chuck**

Versatile: Easily shape, contour, relieve, notch flatten, trim, hollow or adjust a wide variety of non-metallic materials including wood, fiberglass, foam, rubber, plastic, drywall, composites and soft-stone.

3 Joules of impact energy

8.5 Amp high performance motor

The product is 5PC Rock Carb Bit Set

UNIVERSAL: Fits all SDS-max hammers and Hilti hammers with TE-Y/TE-FY shanks

DURABLE: Solid carbide head is ideal for drilling masonry and concrete

RELIABLE: Stays sharper longer to drill more holes than competitors' bits

EFFICIENT: The Bosch SDS-max carbide-tipped rotary hammer core bit features an effective wave design to transfer energy for up to 40 percent speedier drilling versus other bit designs.

POWER: With an integral shank, the HC8526 offers better power transmission and is designed to allow smaller hammers to drill larger holes.

VERSATILE: This core bit is versatile in application with materials including concrete, brick, and block.

UNIVERSAL: Fits all SDS-max hammers and Hilti hammers with TE-Y/TE-FY shanks

DURABLE: Solid carbide head is ideal for drilling masonry and concrete

RELIABLE: Stays sharper longer to drill more holes than competitors' bits