Best Thin Kerf Circular Saw Blades in 2026

48 tooth; 2.2mm kerf; 20mm arbor; 5 deg hook angle; ATB

Cross-cut blade for smooth cuts in veneered plywood, sheet goods, melamine, and hard and soft woods

Oversized 20mm arbor enables more secure fastening of the blade to the saw, reducing vibration for more precise cutting

Thin kerf for fast and smooth cutting action

Computer balanced plate reduces vibration for improved accuracy and better finish

Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy

Specs: Arbor 1", Diameter 12", Grind COMB, Hook Angle 10°, Kerf .091", Plate .071", Teeth 60

Premium TiCo HI-Density Carbide Combination Blend for Maximum Performance

Thin Kerf requires less power and allows for faster feed rate

Made from high-density tungsten Carbide for toughness, wear-resistance, and long life

Tough coat anti-stick coating reduces friction and gumming

Thin kerf design for smooth cuts

TiCo Hi-Density carbide specifically designed for each application to increase performance

Perma-SHIELD Non-stick Coating protects from heat, gumming, & corrosion

Super thin laser cut kerf for fast, durable, and clean cuts

For use with miter or table saws

Carbide construction

Ultra-thin kerf design for easy cuts

7-1/4X60 BULK DIABLO

7-1/4X60 BULK DIABLO

7-1/4X60 BULK DIABLO

Specs: Arbor 5/8", Diameter 8", Grind ATB, Hook Angle 15°, Kerf .083", Plate .063", Teeth 48

Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance

Positive Hook Angles produce a smoother cut and allow for a faster feed rate

TiCo Hi-Density carbide for increase performance

Perma-Shield non-stick coating protects from heat, gumming, and corrosion

Super thin laser cut kerf for fast, durable, and clean cuts

PRECISION : ATAF (Alternate Top and Alternate Face) tooth design for ultra precision cutting

EFFICIENCY : Japanese ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor

ACCURACY : Fully hardened and expertly hand-tensioned steel saw plates for true cuts

The product is 7-1/4x24t Diablo blade

Easy to use

The product is manufactured in Italy

The product is 12x80t Diablo blade

Easy to use

The product is manufactured in Italy

Tougher tungsten carbide stays sharper longer

Thin kerf for fast and smooth cutting action and The arbor size is 5/8”.

Computer-balanced plate reduces vibration for improved accuracy and better finish

Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss

Carbide tooth construction for clean cuts and long life

Fully hardened and expertly hand-tensioned steel saw plates for true cuts

TiCo high-density Carbide for increased performance and maximum cutting life

Perma-shield Non-Stick coating for protection against heat, gumming and corrosion

Super-thin kerf design for fast and effortless cuts

Specs: Arbor 5/8", Diameter 8", Grind ATB, Hook Angle 20°, Kerf .087", Plate .063", Teeth 22

Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance

Thin Kerf allows for faster feed rate and reduced waste

Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish

Super thin laser cut kerf gives extremely fast, durable, and clean cuts

Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp

Durable product

This product meets the customer requirements

Manufactured in Italy

The only approved James Hardie polycrystalline diamond ( PCD ) tipped fiber cement saw blade. Developed by James Hardi and Freud Diablo for all James Hardie fiber cement products and other fiber cement brand products

The PCD triple chip design offers up to 60 times longer cutting life than standard carbide blades

The laser cut thin kerf design gives fast and precise cuts with less dust and waste

Specs: Arbor 5/8", Diameter 10", Grind TCG, Hook Angle 12°, Kerf .091", Plate .071", Teeth 30

Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance

Heavy-Duty Thick Kerf and Plate ensure a stable, flat blade for long cutting life

Up to 100% faster cutting compared to standard blades

Up to 30% more cuts per charge compared to standard blades

Thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss

If you’re like most DIY’ers or woodworkers, you have a few saw blades laying around your garage or workshop. You could make a saw blade rack out of scrap lumber or maybe stack the blades in a corner exposing your blade cutters to getting chipped. The best solution is to protect your blades by simply slipping a blade into a Sili Saw Blade Sleeve. Once in a sleeve, you can hang your blade up and out of the way! All the while protecting you and your saw blade from harm while its not in use.

Made from a softer silicone rubber material, the Sili Saw Blade Sleeve is perfect for protecting your saw blades. While some blades are inexpensive compared to others, why not protect your blades from the daily rigors of job site or workshop use to get the absolute most out of them. The silicone material neatly wraps around the teeth of your saw blade and won’t mark or mar the blade.

These are the ideal storage solution for contractors. With each of your blades protected with a Sili Saw Blade Sleeve, you’ll know that when you get to the next job your blades are ready to go! No more changing blades and seeing a chipped tooth or two rendering the blade useless. Not only will the Sili Saw Blade Sleeves save you time, but they’ll save you money by cutting back on your hardware or big box store visits.

Specs: Arbor 5/8", Diameter 10", Grind ATB, Hook Angle -5°, Kerf .090", Plate .071", Teeth 60

Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance

Negative Hook Angles minimizes climbing for better control

Super thin laser cut kerf gives extremely fast, durable, and clean cuts

Non-stick perm shield coating reduces gumming, rusting, and corrosion - ideal for decks

Durable micro grain titanium carbide for extreme durability and razor-sharp cuts

TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer

Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion

Super-thin laser cut kerf for fast, durable and clean cuts

Real industry quality level with Non-stick coating surface, C4 construction grade tungsten carbide teeth provide maximum resistance for 3X longer life

Ideal for ripping & crosscutiing in softwood, hardwood, chip board and plywood with fine finishing

For use on Miter Saws and Table Saws, Max RPM 6,000

Super Thin Kerf for Fast Cuts

Fits: Makita, Craftsman, Skil and Ryobi

Aggressive Hook Angle

Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts

Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts

Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts