Best Fogwowo in 2026

Package:Including 1pcs drip irrigation pipe hole punch(can punch four sizes pipes) and 1pcs 2-in-one drip irrigation tubing hole punch

Size: Suitable for PE pipes with a diameter of 16/20/25/32 mm, punches holes measuring 3 mm (0.118 Inches), proper size can make sure that sprinklers can snug fit on the tubing for minimizing waste

Easy to Use:Irrigation pipe punch can be used to punch polyethylene pipes to install drippers;suitable for PE pipes with a diameter of 16/20/25/32mm;2-in-one punch is suitable for both drip tubing punch and 1/ 4 fitting insertion use

【Products include】: 8 Pcs 1/2" to 1/4" barbed tee, 8 pcs 1/2" to 1/4" barbed 4-way,4 pcs 1/2" to 1/4" barbed 6-way,20 pcs1/4 inch rubber end caps.A total of 40 pieces can meet your different irrigation needs and long-term daily maintenance

【Measurement】:1/2 Inch to 1/4 inch barbed tee works perfectly with raindrip# 052010P 1/2" tube whose outside diameter (OD) is 0.620 in (16mm), internal diameter (ID) is 0.520 in.Please pay attention to the specifications before purchasing

【Quick and anti-drop】:Easy to install without any other tools.Just push the tube firmly onto the barb and tighten the nut. Locks increases the tightness and will not leak,providing effective and lasting connections for your hose system

【Package & Material】:Product comes with 5 units of 3/4" to1/2" US standard faucet adapters,5 filter washers,and 5 rubber washers.Made of high quality durable,practical,anti-aging and anti-ultraviolet hard plastic

【Measurement】:1/2 Inch drip irrigation fittings,fit for the tubing with an inner diameter of 1/2 inch and an outer diameter of 0.6-0.63" (16 mm) tubing.Compatible with many types of tubing/drip lines

【Quick and anti-drop】:Easy to install without any other tools.Just push the tube firmly onto the barb and tighten the nut. Locks increases the tightness and will not leak,providing effective and lasting connections for your hose system

Specification:Package contains 2 plant support cages.Max diameter of plant cage ring is 8.7 inch. Height of cage is 9.8 inch.Great for small or medium size plants

Easy to Assemble:No extra tools required, just simple assembly,can complete the support cage to protect your plants.By adjusting the ring and the plant stakes to meet your different needs.Bottom tip design helps push the stakes into soil more easily.Detachable and easy to store

Protect Healthy Growth of Plants:Can well prop up plants to grow uprightly and healthily.Protect plants against strong wind, heavy rain, or their own weight; prevent plants from falling over and sprawling out, keep them upright and elegant

🌞【Powered by Solar Energy】Automatic watering system for potted plants is powered by solar energy. It’s a system of controller (solar panel, 2200mAh battery, 2.5w pump and timer), pipe and drippers that deliver the proper amount of water to each plant. There is no need to connect the power cord to charge the plant watering system, as long as the sun can reach the place to self-charging.

💧【Take Water Anywhere】This solar plant self watering devices can take water directly from containers such as buckets /water tank, without the need for a tap. Excellent for yard, urban patios and balconies where faucets are unavailable.

⏱️【6 Preset Precise Timer Watering Modes】Press the MODE to switch the watering frequency. Blue indicator light shows from left to right according to your press: 5mins /15mins /20mins per 12H and 5mins /15mins /20mins per 24H. The watering flow from controller outlet is about 400ml (0.1gal) per minute, please select the number of drippers and the watering frequency according to your actual water demand of plants. Generally, 10-gallon water can last for at least 3weeks for 15 pot houseplants.

Micro-Drip-System-a water-conserving method to deliver a targeted amount of water via drip heads directly to the plant

Watering is perfectly adapted to the individual needs of your plants: From continuous drops to a slight drizzle, to a gentle mist spray - this advanced irrigation system will help you to conserve water

With the Micro-Drip-System drip irrigation, the water quantity per plant can be exactly dosed, so that no water is wasted

Valve for use with 1/4" Drip irrigation tubing

Top cap turns to adjust or completely shut off water flow

Self-piercing design; use with 1/4" Drip tubing or insert into 1/2" or larger Drip tubing

Orbit extra valve for complete watering kit is completely waterproof for uninterrupted operation

Valve has a leak-free design

Easy to install by plugging into timer; no wiring required

Universal coupling fitting connects two sections of any brand 1/4" Drip irrigation tubing in a straight line

Self-piercing barbed end for insertion directly into the side of 1/2" or larger Drip tubing

Unique barb design reduces insertion force; natural color blends with all earth tones

IRRIGATION VALVE BOX: Protect irrigation system components from the elements, foot traffic, lawncare equipment, and potential vandalism, and keep them out of sight; Fits over valves, control zone kits, and other irrigation accessories

DURABLE PLASTIC: Structural reinforcing ribs provide support and strength to protect items housed inside against damage; Made of durable PP treated with UV inhibitors

SECURE COVER PROTECTS AGAINST DIRT: Overlapping cover prevents dirt and debris from entering the box; ICV designation; slot on lid for easy lifting with flathead screwdriver

Complete 42-piece Drip irrigation kit eliminates watering by hand

Provides convenient water-saving Drip irrigation for up to 6 planters

Easy to assemble: just attach to faucet, cut tubing and connect watering devices

Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6 tubing end cap closures.

These 17mm barbed fittings work with half inch drip tubing from 0.560 to 0.600 Inside Diameter (ID). Compatible with many types of Rainbird, Orbit, Dig and Toro tubing as well as generic 1/2" blank tubing or drip lines.

The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. These 17mm drip fittings are made with long-lasting and environmentaly-friendly regrind tubing plastic.

【Fits 1/4 Inch Irrigation Tubing】：Quarter Inch Tubing Connectors. Universal 1/4” drip irrigation parts work with most brand of 1/4’’ drip irrigation tubing. Note: Please check the size carefully before purchasing.

【Easy to Install】: The drip tubing parts are designed with barbs. Before assembly, please place these drip pipe fittings in 70-80 ° water for 10 seconds, and then push the pipe onto the barb. The pipe will remain tight after cooling.

【Enough Quantities】: 295pcs matching kits total, Drip Elbows Fittings (20pcs), Barbed Drip End Plug (30pcs), Barbed 4-way Connector (25pcs), Single barbs (35pcs), Straight Barbs (110pcs), Barbed Tees (75pcs). Meet all needs for 1/4 inch irrigation tubing connecting.

Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connection kit. Connect your drip irrigation system to your water supply, keep out debris with a filter, maintain optimally low flow water pressure, and prevent backflow all with a single pre-assembled unit.

Connect ½” tubing to any standard ¾” male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit. Leakproof connector is compatible with any 1/2" tubing sizes .520 to .620 ID (inner diameter) including Rain Bird and Dig.

Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately.

【PERFECT MATCH 1/4 INCH IRRIGATION TUBING】JOYPRO 1/4 inch irrigation fittings can work with most of the standard 1/4" drip irrigation tubing. (Note: Please check the size of tubing carefully before purchasing.)

【MADE OF DURABLE PLASTIC MATERIAL】JORPRO drip line connectors are made of high quality engineering plastics, so our irrigation fittings are durable, strong, water resistant, chemical-resistant and long-lasting than others.

【EASY TO INSTALL】It is easy to install without any glue, tools or clamps. Simply push the tubing over the barbs, the barbed ends can grab 1/4" tubing tightly for a secure leak-proof connection.

【Adjustable Flow Velocity】- The water flow rate can be adjusted by adjusting the control valve. Our automatic plant watering device can control the speed, and the continuous dripping time is 3-20 days. Don't need to worry about your plants withering during during travel, business trips and vacations.

【New Upgrade Design】- Compared to other normal products, our upgraded watering spikes do not need to poke holes in the bottom of the bottle when in use. Its appearance is also more beautiful with three colors of blue, orange and green. The most important thing is that it will not stop watering due to the influence of water pressure.

【Eco-Friendly and Easy to Use】- Our plant watering spikes are made of high quality PP material, non-toxic, odorless, non-fading. Without any complicated installation, you just insert these automatic watering devices into the soil.

❀PACKAGE INCLUDES：This 200-pieces barb connector kit includes: 80 x straight barbs，60 x tube tees , 20 x elbows fittings, 20 x end plug, 20 x 4-way coupling. Meet all the needs of garden irrigation parts.

❀LONG-LASTING: Made of high quality engineering plastics, durable, strong, water resistant, chemical-resistant materials to assure long life.

❀EASY TO USE: Use these durable irrigation fittings to your connect 1/4 inch drip irrigation tubing.Save money and time buying everything you need at once. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.

Total length: 5.2 inches / 13cm; water outlet hole diameter: 0.05 inch / 1.4mm. Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top.

Make sure the hose is softened before connecting, you soak end of 1/4" tubing in VERY hot water before attaching to the dripper, A firm push with a little added wiggling gets the hose on with sprinkler.

Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head on an underground system for pots, tubs, ground cover, landscaped gardens and Etc...

【Adjustable Flow Velocity】- The water flow rate can be adjusted by adjusting the control valve. Our automatic plant watering device can control the speed, and the continuous dripping time is 3-20 days. Don't need to worry about your plants withering during during travel, business trips and vacations.

【New Upgrade Design】- Compared to other normal products, our upgraded watering spikes do not need to poke holes in the bottom of the bottle when in use. Its appearance is also more beautiful with three colors of blue, orange and green. The most important thing is that it will not stop watering due to the influence of water pressure.

【Eco-Friendly and Easy to Use】- Our plant watering spikes are made of high quality PP material, non-toxic, odorless, non-fading. Without any complicated installation, you just insert these automatic watering devices into the soil.

Be a Gardening Master with the help of our superior and complete Drip Irrigation Kit: 10 Drip Irrigation Emitters Vortex + 20 Drip Emitters Spray + 50ft flexible & durable 5/16 irrigation tubing + 50ft 1/4 inch Drip Irrigation Tubing + 12 tubing coupler + 5 ¼ Tubing Tee Splitter + Tubing End Plugs + Water Connector + 1 x Complete Instructions Guide Hard Copy + 2 Grow your Own Vegetables & Fruits Guide full with pieces of advice and practical tips Digital Format.

Cut down your water bill - Minimize the amount of water loss by watering the roots of the plants with the garden drip irrigation system. Adjust the drip emitters 1/4 by rotating the cap and give your thirsty plants the amount of water they need. Our irigation system can be used for raised garden bed, as garden watering system for healthy vegetables, automatic watering system for potted plants, drip system for fruit trees, or as patio irrigation kit. Enjoy healthier plants with less cost and work

Make your own garden irrigation system kit easier than ever: run a 3/4 connection from your water source to the watering area. Use the 5/16 drip irrigation tubing as the mainline. Branch off with the 1/4 drip irrigation tubing and connect the drip irrigation emitters. Stick the dripper stake into the soil, adjust the desired irrigation spray width and feed your plant with your own drip irrigation system. Designed to work with between 20 and 45 PSI and a maximum output of 60 gallons/hour/emitter.

*QUALITY, MEET SIMPLICITY* The Garden Grid watering system solves the problems of leaky, hard to assemble, & short-lived drip lines & planting guides. It's UV resistant, ready to use in seconds, helps organize plants & designed to last!

*DESIGNED TO LAST* Unlike drip lines & soaker hoses, which often leak & need replacing after a few seasons, the Garden Grid is durable & long-lasting. How long will it last? We're not sure! Some prototypes from 2013 are still used today!

*PREASSEMBLED* The Garden Grid comes in preassembled sections that press together by hand in seconds. Connect it to your garden hose & you're ready to grow! No cutting or perforating rolls of tubing & no complicated assembly.

Micro-Drip-System-a water-conserving method to deliver a targeted amount of water via drip heads directly to the plant

Watering is perfectly adapted to the individual needs of your plants: From continuous drops to a slight drizzle, to a gentle mist spray - this advanced irrigation system will help you to conserve water

With the Micro-Drip-System drip irrigation, the water quantity per plant can be exactly dosed, so that no water is wasted

Micro-Drip-System-a water-conserving method to deliver a targeted amount of water via drip heads directly to the plant

Watering is perfectly adapted to the individual needs of your plants: From continuous drops to a slight drizzle, to a gentle mist spray - this advanced irrigation system will help you to conserve water

With the Micro-Drip-System drip irrigation, the water quantity per plant can be exactly dosed, so that no water is wasted

【PACKAGE LIST】The 1/2 inch drip irrigation parts kit includes 4pcs barbed tees,3pcs switch valves,4pcs 3 way 1/2" to 1/4" connector,3pcs 6 way 1/2" to 1/4" connector,4pcs end cap,2pcs elbows, which let you connect your irrigation systems as you wish.

【PERFECT MATCH STANDARD DRIP TUBING】These drip line nut connectors can connect to most of the standard 1/2" drip tubing(0.60"-0.63" OD) and 1/4" drip line(4mm ID). (Note: Please check the size of tubing carefully before purchasing.)

【MADE OF DURABLE PLASTIC MATERIAL】These drip irrigation parts are made of high quality engineering plastics, so our irrigation tee connectors are durable, strong, water resistant, chemical-resistant and long-lasting than others.

【FITS 1/4 INCH IRRIGATION TUBING】：Quarter Inch Water Hose Connectors. Universal 1/4” drip irrigation fittings work with most brand of 1/4” drip irrigation tubing. Note: Please check the size carefully before purchasing.

【DURABLE PLASTIC MATERIAL】：Made of high-impact and high-strength plastic material, this 1/4 inch irrigation connectors won’t deform or break easily and assures more durable life.

【EASY INSTALLATION】：Easy to install without glue, tools or clamps. Barbed ends grab 1/4” tubing tightly for a secure leak-proof connection. Tips: Heat the end of hose to help it connect with the connectors.

【PACKAGE LIST】It comes with 12 pieces barbed locked coupling connectors, which let you connect your irrigation systems as you wish.

【PERFECT MATCH STANDARD DRIP TUBING】These drip coupler connectors can connect to most of the standard 1/2" drip tubing(0.60"-0.63" OD). (Note: Please check the size of tubing carefully before purchasing.)

【MADE OF DURABLE PLASTIC MATERIAL】The drip line nuts connectors are made of high quality engineering plastics, so our drip barbed connectors are durable, strong, water resistant, chemical-resistant and long-lasting than others.

【Great Value】50 pieces of 1/4 inch irrigation tee connectors are included in.

【Fits 1/4 inch irrigation hose】This barbed tee fittings connect two sections of any brand 1/4" drip irrigation tubing. Note:Please check the size carefully before purchasing.

【Durable Material】Made of high-impact, high-strength plastic material, this 1/4 inch tee connector won’t deform easily and assures more durable life.

Wide range of applications: drip irrigation single barbed connector works well in connecting 2 sections of 1/4 inch mm tubing to direct water to another location, which can be applied for drip irrigation tubing system, flower beds, vegetable gardens, herbs gardens

How to install: just easily install the barbed coupling fitting by push the tubing firmly over the barbed part for a tight fit, not easy to fall off, which has strong holding power with barbed ends, making the connection more firm

No need for glues or tools: after fully inserting straight barbed connectors at the ends of the water pipe, you don't have to use any glue, tools, or clamps to fix the drippers or nozzles, garden work can be much easier and more relaxing

What's in the Package: This is expansion or extra accessories kit, including a filter, an anti-siphoning device, 10 meter Tubing, 10 Pieces of T-Joints and 10 Pieces of Drip-stakes.

Tips for Connecting: Hot water will soften end of water tube enough to fit over T-Joint barb and tighten as it cools. Lightly soap end of selected T-Joint. Dip tube end in hot water 10 -15 seconds. Dry tube end and fingers. Use repeated pushing movements to fit warmed tube end completely over T-Joint barb.

An Expansion Kit: This is an expansion or extra accessories kit. The Solar Drip Irrigation Whole Kit can support max 15 Pots, but the Whole Kit, the Standard Accessories Comes with 10 Drip-Stake. You can water plants up to 15 pots under the help with this expansion accessories kit.