Best Freelight in 2026

⭐Combined with double Carbon fiber rods of each legs, this bipod is lighter than metal aluminum, but strength is higher than steel. Designed for real caliber, no collapse.

⭐With return springs and leg release button, the leg length can be adjusted from 6 inches (152mm)to 9 inches(225mm).

⭐Swivel style from side to side by Pivot Leg, This function enable you to rotate the gun from side to side and compensate for ground that is un-level up to 20 degrees. Pod Lock replaces the thumbnut on pivoting bipods to make locking them down easier

This is the Side Mounted Bipod/Rail kit, which is specifically designed for Breakbarrel and Underlever air rifles in that it still allows the cocking mechanism to move freely. This can be used on both synthetic and wood stocks

The kit comes complete with the Bi-directional folding Bipods, 5-Slot alloy picatinny rails and the four installation screws.

Made of high quality aluminum alloy material, non-rust black anodized finish, sturdy and durable.Can increase shooting accuracy due to the excellent stability offered by bipod.

Mil-spec hard anodized 6061 T-6 aluminum

Stainless steel internals, and injection-molded reinforced polymer

Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand

Made of LIGHTWEIGHT MIL-SPEC hard anodized 6061 T-6 aluminum and Injection-molded polymer; aesthetically pleasing, LOW-PROFILE DESIGN conceals its mechanisms and hardware, smoothly brushing off Snags and bumps

Optimized for RAPID ONE-HANDED ADJUSTMENTS; quickly and quietly transitions between countless user configurations

Easily loaded with STABILIZING FORWARD TENSION without fear of failure or warping; at just over 11 ounce , The Magpul bipod is LIGHTER THAN MANY PRICIER BIPODS currently on the market

Mil-spec hard anodized 6061 T-6 aluminum

Stainless steel internals

Spring-tensioned legs stow neatly forward and snap down

Product 1: Mil-spec hard anodized 6061 T-6 aluminum

Product 1: Stainless steel internals

Product 1: Spring-tensioned legs stow neatly forward and snap down

Mil-spec hard anodized 6061 T-6 aluminum

Stainless steel internals

Spring-tensioned legs stow neatly forward and snap down

Sport Type: Tactical & Military

High strength reinforced injected molded polymer, steel and Mil-Spec hard anodized 6061 T-6 aluminum construction; Uncle Mike’s-style sling stud on rear of mounting body

+/- 25 degrees of tilt (about the longitudinal axis of rifle) for a total of 50 degrees

Coming with Picatinny adapter, the bipod can be quickly attached or detached by using the swivel stud.

Made of hardened steel and aluminum, non-rust black anodized finish, the bipod is duty and light weight.

Adjustable extension leg slide and lock securely with a button.5 notches for different length to meet your needs.

DIMENSIONS: Weighs approximately 5.5 pounds with a 10 inch diameter and 8 inch vertical adjustment

ACCURACY: With fingertip elevation adjustment, a rubber or metal feet option, a cast iron base and a ¾ inch diameter steel elevation post with a lock lever, this rest is made for rock-solid stability

NON-DESTRUCTIVE: This rest can be used with a filled, medium varmint bag (included) and is compatible with any Caldwell Deluxe Universal Front Rest Bags that will securely hold your gun without damaging the barrel or stock

Country Of Origin : China

The Package Height Of The Product Is 4 Inches

The Package Length Of The Product Is 9 Inches

DIMENSIONS: Weighs under 6 pounds and adjusts from 20 inches to 42 inches high

ACCURACY: With a dual frame for maximum stability, upper frame balance point adjustment, a tension knob for tilting the frame up or down and independent height adjustable front and rear supports, this rest is solid before, during and after every shot

NON-DESTRUCTIVE: This rest features over molded, non-marring rear stock and front forend support that will securely hold your gun without damaging any point of contact

Made using the highest quality materials

Tested for durability

Designed to be safe and unique

Hunting range gear monopods

Made of the highest quality materials

Another great Primos product

SPECS: Weighs 8.5 lbs with a 13 inch diameter base

EASE OF USE: Fingertip elevation adjustment

CONVENIENT: Built-in carrying handle

New Quick Detach Yoke System with Integrated Lock

New Contoured Grip with No-Slip Backbone

Strengthened Rotating Joint for Smooth Panning

Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is heavy-duty and lightweight.

Loosing the bottom screw of the picatinny bipod to swivel the top adapter, you can adjust any angle you want. When tighten the bottom screw, the adapter will be secured,which provides you a steady support.

With the spring on both legs, you could fold the legs up easily and keep silent when hunting.

Handy, accuracy-enhancing accessory for your rifle with clever dual mounting design

Durable aluminum construction and steel top platform; includes both Picatinny and swivel stud mounts

Foldable arms with spring tension control, and include Posi-Lock wheel and quick retraction button

【Camo Rifle Bipod】This picatinny bipod is designed with camo color, a color closer to nature, which is also very bright and stylish.

【Sturdy and Durable】The rifle bipod is made of hardened steel and aluminum, non-rust camo anodized finish, the bipod is duty and lightweight.

【Adjustable Legs】The bipod for picatinny rail can be extended from 6” to 9”. With the release button, you can adjust the height to the exact level easily and quickly.

Adjustable leg length (5 settings) with return Springs, you could adjust the length to meet different needs when hunting.

Press the button,the legs can eject fully and quickly.The length of legs can be adjusted from 6-9 inches.

Made of hardened steel and aluminum, non-rust black anodized finish, the bipod is duty and light weight.

Legs length is 6 - 9 inches / 15 - 23 cm.

Manufactured from Carbon fiber, lighter and stronger and durable than steel.

Pivoting and Tiltable --- This function enable you to rotate the gun from side to side and compensate for ground that is un-level up to 20 degrees.

Directly attaches to m-lok handguards at the 3 and 9 o'clock positions

Ergonomic spring loaded slide locking ring for quick and effortless bipod deployment

Lightweight aircraft aluminum construction with a matte black finish

With return springs and leg release button, the leg length can be adjusted from 9" to 13"

Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.

Adjustable leg length: 10 settings for different length, the bipod is ready to meet your needs.

Lightweight aluminum alloy gun pod features rubber V shaped yoke

V-shaped yoke swivels 360 degrees allowing shots from any angle

20mm aluminum alloy legs. Folded height: 22 1/4". Extended height: 62". Weight: 1.10 lbs.

This bipod adapter is specific for the mLok hand-guard and made to work with Harris type bipods and the most common bipods on the market, it is also compatible with other accessories that attach to traditional sling studs

Upgraded low profile design, raised edges is to create a very snug fit that ensures the bipod to rest on the mlok system more securely without wiggling

Comes with one more set of the screws and T-nuts in case they're missing or damaged

Lighter, stronger-Carbon fiber is "soft outside and strong inside", the weight is lighter than metal aluminum, but the strength is higher than steel.

High &low temperature resistance,corrosion&fatigue resistance-Carbon fiber bipod can be used to any environment, it can hold the rifle more stably and shoot more accurately.

Better hand feeling-The surface of the carbon fiber bipod is more slippery, the pattern looks more stylish. It feels better and experiences better, brings you unprecedented ease.

DIMENSIONS: 6”-9” height and weighs 12 oz

ACCURACY: Notches are located on the legs for quick and easy indexing as well as an 18 degree bi-directional cant

EASE OF USE: Legs fold up for easy transport and will instantly spring out with the push of a button and the bipod mounts quickly on the forend sling stud

SPECS: 4" course elevation adjustment at the rest

EASE OF USE: Adjust windage and elevation with a single movement

NON-DESTRUCTIVE: Contoured rear support protects your firearm's finish