Best Gounengnail in 2026

One Kit includes:One 3/8'' Plated Copper Ground Rod (4 feet FULL LENGTH) and attached binding clamp

Premium for Satellite dishes, off-air antenna and electric fence grounding installations

This solid, sturdy steel reinforced copper grounding rod provides lightning dissipation for a safe grounding solution

GOUNENGNAIL branded .25" (1/4") x 2" x 10" Copper Ground Bar with 5/16'' * 12 Terminal Positions. With SM40 polyester insulators made from UL material - QMFZ2.E252110,Rated Uimp up to 7.4kV.

The ground bar kit includes: 1x copper plate, 2x stainless steel brackets, 2x SM40 polyester standoff Insulators, 12x sets of stainless steel washer& bolts,and warning tag for negligence of disconnection.

Comes pre-assembled with brackets and insulators attached for quick installation.

Copper ground bar . Made of high conductivity copper to inhibit corrosion.Insulator material: Made from UL recognized resin material and meets the Requirements of UL 94 VO for Self-Extinguishing Materials.

Wall mounted copper ground bar kit enables multiple ground points to be connected quickly and easily.

Comes pre-assembled with brackets and insulators attached for quick installation

Copper Flat Bar 1/4" x 1" x 12" -Long

Material: 110 Copper ,has high conductivity and formability

Copper BusBar Great for electrical engineering

.25" (1/4") x 2" x 12" Copper Bus Bar with 1/4" * 20 Terminal Positions.

Made from UL Resin Material - QMFZ2.E252110,SM40 Busbar Insulator Rated Uimp up to 6kV .

Copper ground bar set,including one 12inch copper plate, two SM40 standoff Insulators,two stainless steel brackets, 20 sets stainless steel washer& bolts.

Dimensions: 3/15" x 1.2" x 19"

Set includes: Copper Busbar, 4 foot 10AWG tinned copper grounding cable, 38pcs pre-installed stainless steel #10-24 screws,2pcs M8 mounting screws 19 inch Copper Busbar Kit 1/2" x 1.2" x 19" -Can be positioned anywhere on the Rack for the grounding requirements within the Rack, Enclosure, or Cabinet.

Grounding Bar Kit Size : 24" x 4" x 1/4" ,Metric Thickness Minimum 6 mm. Precisely Machined with 36 x 0.438’’ Holes for Multipurpose Terminal Positions.

Quality Material: Ground Bar is Made from C11000 Fine Copper , 2”X2’’ Standoff Thermoset Insulators Made from UL Recognized Material,2500V for Reliable Industrial Installations. Standoff Brackets and Terminal Bolts are 304 Stainless Steel.

Kit Includes: 1x Copper Plate, 2 x Stainless Steel Brackets, 2 x 2’’ Standoff Insulators, 36 x Sets of Stainless Steel Washer & Bolts,and 1 x Alluminum Warning Tag for Negligence of Disconnection Warning.

Used in load centers, CSED devices and NQOD and NF panel boards

Feeds wires to neutral bar in load centers

Compact and lightweight

1/4" Stud - 12 Terminal Red & Black Power Distribution Block For a Variety Of wiring Scenarios

Includes 12x nylon 16-14 awg #8 1x nylon 12-10 awg 1/4 1x nylon 8 awg 1/4 1x nylon 6 awg 1/4

12 Stainless Steel #8-32 Terminal Screws and Stainless Stud Will Not Rust Or Corrode In Wet Environments

21 terminal openings

Each terminal opening accepts No.14-4 CU/AL conductors

Includes ground lug with wire range of No.14 - 2/0 CU/AL

Please note that this grounding rod is made of copper plated steel for optimum lightning dissipation. If you expect a pure copper grounding rod, please do not purchase this product.

It's used for grounding off-air antennas and satellite dishes for optimum protection and performance .

Ship with Pre-installed Screw Wire Clamp. Suitable for grounding construction under different soil moisture, temperature, pH and resistivity changes.

One Kit includes:One 3/8'' Plated Copper Ground Rod (4 feet FULL LENGTH) and attached binding clamp

Premium for Satellite dishes, off-air antenna and electric fence grounding installations

This solid, sturdy steel reinforced copper grounding rod provides lightning dissipation for a safe grounding solution

14 terminal openings

Each terminal opening accepts No.14-4 CU/AL conductors

Insulated Ground Bar

Ground Bar Kit

For 70A 2 Space Main Lugs Load Center

Necessary With Equipment Used As Service Entrance

Returns will not be honored on this closeout item

8 small and 3 large terminal openings

Small openings accept a wire range of No.14-6 CU/AL

Large openings accept a wire range of No.14-1/0 CU/AL

15 Terminal Openings

Each Terminal Opening Accepts No.14-4 Cu/Al Conductors

Ec2Gb Series Ground Bar

Ground Bar Kit

For 200A Main Breaker Installed Load Centers

20-40 Circuits

Package Includes: 2 x Terminal Bus Bar

Contact material: copper Production process: cold pressing Insulator material: plastic.

Total Size: 83 x 12 x 21mm/3.3" x 0.5" x 0.8"(L*W*H). Mounting Hole Diameter:4mm/0.16".

GOUNENGNAIL branded .25" (1/4") x 2" x 10" Copper Ground Bar with 5/16'' * 12 Terminal Positions. With SM40 polyester insulators made from UL material - QMFZ2.E252110,Rated Uimp up to 7.4kV.

The ground bar kit includes: 1x copper plate, 2x stainless steel brackets, 2x SM40 polyester standoff Insulators, 12x sets of stainless steel washer& bolts,and warning tag for negligence of disconnection.

Comes pre-assembled with brackets and insulators attached for quick installation.

Copper ground bar . Made of high conductivity copper to inhibit corrosion.Insulator material: Made from UL recognized resin material and meets the Requirements of UL 94 VO for Self-Extinguishing Materials.

Wall mounted copper ground bar kit enables multiple ground points to be connected quickly and easily.

Comes pre-assembled with brackets and insulators attached for quick installation

Brass terminal grounding strip bus bar block with 8 screws & 2 Stud

High quality plastics base ensures great mechanical strength and durability

Use M4 screws to fix it in place through the two screw holes on both ends of the terminal

.25" (1/4") x 2" x 10" Copper Ground Bar with 1/4''* 16 Terminal Positions.

This is a high conductive copper ground bar set, including one copper plate, two SM40 polyester standoff Insulators, two stainless steel brackets, 16 sets stainless steel washer& bolts .

SM40 polyesters made from UL material - QMFZ2.E252110,Rated Uimp up to 6kV .

8 terminal openings

Each terminal opening accepts No.14-4 CU/AL conductors

Includes ground lug with wire range of No.14 - 2/0 CU/AL

Oval-eye ground rod 1/2’’(12mm) diameter and 18’’long.Preinstalled with a convenient tinned copper ground wire lug for wires up to 4 AWG solid or stranded .

Oval-eye design for convenient to drive into ground, pull out and tie out for anchor ropes.

Color Zinc finish for greater corrosion resistance.Solid steel shaft with high tensile strength for robust and steady driving.

⭐Brass terminal grounding strip bus bar blocks with 4 screws.

⭐Hole Diameter: 5mm/0.2"; Screw Size: M4.

⭐Mounting Hole Center Distance: 59mm/2.32".

1.Wall mounted .24"x 1.97"x 9.8"(6×50×250mm) copper ground bar kit,copper grounding busbar.

2.Material: copper,stainless steel,resin;colour:yellow,red,silver.

3.Size :6x50x250mm;total length:250mm(9.8''),width:50mm(1.97''), thickness:6mm(.24'').

Brass terminal grounding strip bus bar blocks with 4 screws.

Hole Diameter:5mm/0.2";Screw Size:M4.

Mounting Hole Center Distance:57mm/2.24".

5 terminal openings

Each terminal opening accepts No.14-4 CU/AL conductors

Insulated Ground Bar

Ground Bar Kit

10-Circuit/Terminals

For CH/BR Type Load Centers