Best Siemens Grounding Bars in 2026

Used in load centers, CSED devices and NQOD and NF panel boards

Feeds wires to neutral bar in load centers

Compact and lightweight

Please note that this grounding rod is made of copper plated steel for optimum lightning dissipation. If you expect a pure copper grounding rod, please do not purchase this product.

It's used for grounding off-air antennas and satellite dishes for optimum protection and performance .

Ship with Pre-installed Screw Wire Clamp. Suitable for grounding construction under different soil moisture, temperature, pH and resistivity changes.

One Kit includes:One 3/8'' Plated Copper Ground Rod (4 feet FULL LENGTH) and attached binding clamp

Premium for Satellite dishes, off-air antenna and electric fence grounding installations

This solid, sturdy steel reinforced copper grounding rod provides lightning dissipation for a safe grounding solution

Ground Bar Kit

For 70A 2 Space Main Lugs Load Center

Necessary With Equipment Used As Service Entrance

14 terminal openings

Each terminal opening accepts No.14-4 CU/AL conductors

Insulated Ground Bar

15 Terminal Openings

Each Terminal Opening Accepts No.14-4 Cu/Al Conductors

Ec2Gb Series Ground Bar

8 small and 3 large terminal openings

Small openings accept a wire range of No.14-6 CU/AL

Large openings accept a wire range of No.14-1/0 CU/AL

GOUNENGNAIL branded .25" (1/4") x 2" x 10" Copper Ground Bar with 5/16'' * 12 Terminal Positions. With SM40 polyester insulators made from UL material - QMFZ2.E252110,Rated Uimp up to 7.4kV.

The ground bar kit includes: 1x copper plate, 2x stainless steel brackets, 2x SM40 polyester standoff Insulators, 12x sets of stainless steel washer& bolts,and warning tag for negligence of disconnection.

Comes pre-assembled with brackets and insulators attached for quick installation.

.25" (1/4") x 2" x 10" Copper Ground Bar with 1/4''* 16 Terminal Positions.

This is a high conductive copper ground bar set, including one copper plate, two SM40 polyester standoff Insulators, two stainless steel brackets, 16 sets stainless steel washer& bolts .

SM40 polyesters made from UL material - QMFZ2.E252110,Rated Uimp up to 6kV .

Oval-eye ground rod 1/2’’(12mm) diameter and 18’’long.Preinstalled with a convenient tinned copper ground wire lug for wires up to 4 AWG solid or stranded .

Oval-eye design for convenient to drive into ground, pull out and tie out for anchor ropes.

Color Zinc finish for greater corrosion resistance.Solid steel shaft with high tensile strength for robust and steady driving.

1.Wall mounted .24"x 1.97"x 9.8"(6×50×250mm) copper ground bar kit,copper grounding busbar.

2.Material: copper,stainless steel,resin;colour:yellow,red,silver.

3.Size :6x50x250mm;total length:250mm(9.8''),width:50mm(1.97''), thickness:6mm(.24'').

Ground Bar Kit

10-Circuit/Terminals

For CH/BR Type Load Centers

Fits up to 4 AWG solid wire. If using stranded wire, please be advised that fitment may be tighter.

High grade aluminum for dependable connectivity

Feeds wires to neutral/ground

【Great Service】Alopee offers one year warranty for this 𝐜𝐚𝐫 𝐡𝐨𝐨𝐝 𝐥𝐢𝐠𝐡𝐭 𝐬𝐭𝐫𝐢𝐩. No matter what problem you came across before or after order, just message Alopee, our customer service team will respond within 24 hours.

【Cool Design】Automatical dynamic scan mode when starting the car and then stay on constant lighting mode, making your car outstanding. Double side adhesive, just peel and stick, pasted or hung as you want, no tools required, no need to change the wire connection. Eye-catching white light reminds the coming vehicles or pedestrians and reduce the incidence of traffic accidents effectively.

【IP68 Waterproof】Made of high-quality flexible silicone material, the led hood light strip is waterproof, dustproof, fogproof and anti exposure, not easy to be damaged in any weather condition. Non-heating elastic material prolongs its working life.

5/8" Hot Dip Galvanized Ground Rod,32" long,with insulated T-handle for easier and safer grounding. includes ground terminal bolts stainless steel made for convenient wire connection to other devices.

Ideal for Electric Fence grounding, energizers and temporary fences that will be moved frequently.Satellite dishes, off-air antenna and lightning dissipation grounding rod.

Hot dip galvanized steel construction meets to ASTM A-153 requirements, with great tensile strength ,anti-corrosion feature and electrical performance.

Distance between mounting holes is 1-3/4 in.

Number of terminals: 21

Size: 3/4 in.

Designed for use with Leviton Load Center Panels

Required for all panels

Easily mounted inside the panel

COPPER GROUNDING BUS BAR with Six 1/4" Holes: The package contains 2 Heavy Stainless Steel Mounting Brackets, 2 UL Recognized Polyester Thermoset Standoff Insulators Rated to 2,500 Volts, which Meets BICSI and J-STD-607-A Requirements for Network Systems Grounding Applications.

HIGH QUALITY MATERIAL: Copper Grounding Busbar Bar Kit has standoff insulator made from UL recognized material . Copper busbar made of high conductivity copper plate to inhibit corrosion and ensure good conductivity providing multiple grounding points to be connected quickly and easily.

UL Listed: Our copper ground bus bar is UL Listed for grounding which means it transforms safety, security, and sustainability challenges into opportunities for customers in more than 100 countries.

【Pack】A high conductivity copper ground set.Including 1 copper plate,2 SM40 polyester standoff insulators,2 low carbon steel brackets,27 sets washer&bolts.

【Size】Copper bar:0.24"x 3.94"x 12"(6x100x305mm),Thickness 0.24"(6mm),Width 3.94"(100mm),Length 12"(305mm),hole 0.44"(11mm).

【High Quality Material】The copper plate is C11000 grade and contains 99.9% copper.SM40 polyester insulators made from UL recognized material,rated uimp up to 6kV.The brackets are made of low carbon steel and the screws are made of 304 stainless steel.

1.10 terminal load center ground bar kit.

2.Material: brass; colour: golden-yellow.

3.Size: 4.21" x .31" x .47"; length: 4.21''(107mm),width: .31''(8mm),height: .47''(12mm).

19 inch Copper Bus Bar

Provide the common grounding point within the Rack, Enclosure, or Cabinet

Engineered to comply with US and International grounding requirements

Made of high quality brass material, these ground bars are durable and sturdy

High strength, high hardness, good wear resistance and chemical corrosion resistance

It is easy to wire, not easily being oxidized, and has strong capacity

Product Name: Ground Copper Bar; Material: Brass

Color: Brass Tone; Size: 84 x 8 x 13mm/3.3" x 0.3" x 0.5"(L*W*H)

Product Weight: 49g; Package Content: 1 x Ground Copper Bar

Dimensions: 3/15" x 1.2" x 19"

Set includes: Copper Busbar, 4 foot 10AWG tinned copper grounding cable, 38pcs pre-installed stainless steel #10-24 screws,2pcs M8 mounting screws 19 inch Copper Busbar Kit 1/2" x 1.2" x 19" -Can be positioned anywhere on the Rack for the grounding requirements within the Rack, Enclosure, or Cabinet.

Grounding Bar Kit Size : 24" x 4" x 1/4" ,Metric Thickness Minimum 6 mm. Precisely Machined with 36 x 0.438’’ Holes for Multipurpose Terminal Positions.

Quality Material: Ground Bar is Made from C11000 Fine Copper , 2”X2’’ Standoff Thermoset Insulators Made from UL Recognized Material,2500V for Reliable Industrial Installations. Standoff Brackets and Terminal Bolts are 304 Stainless Steel.

Kit Includes: 1x Copper Plate, 2 x Stainless Steel Brackets, 2 x 2’’ Standoff Insulators, 36 x Sets of Stainless Steel Washer & Bolts,and 1 x Alluminum Warning Tag for Negligence of Disconnection Warning.

Grounding Bus bars are insulated ground bus mounting plates

Type 110 alloy solid copper ground bars

¼” thick, any lug with 3/8” bolts may be used

MULTIPLE USES: This electrical grounding bar has a wide range of uses and is an ideal tool for different purposes. It is dedicated to PE30 distribution boxes, power distribution cabinets, and lighting boxes.

M5 SCREW SIZE: The size of the screw used with this electrical grounding rod is M5. If the screw is lost during use, you can equip it by yourself. When installing the circuit facilities, please cut off the power first and operate carefully.

EASY INSTALLATION: This 10 hole terminal block is easy to install and cable, so that the wires are more tidy and not easy to be oxidized, so you don't need to replace frequently, with large capacity and better performance.

【Highly Conductive Copper Ground Bar】With a resistivity lower than 0.01777, our grounding copper has a conductivity as high as 98% and can be tinned, galvanized, nickel-plated, etc., providing functions of insulation and conduction, making all electrical equipment equalized in voltage, and preventing ground potential backlash accidents.

【12 Terminal Positions & Pre-assembled Fittings】There are 12 terminal positions on the copper bar to connect multiple devices at the same time. The ground bar is pre-assembled with 2 stainless steel brackets, 2 resin standoff insulators, and 4 sets of insulator washers and bolts for quick, safe, and secure wall mounting.

【Corrosion-resistant Oxygen-free Copper】The copper ground bar, made of more than 99.95% T2 oxygen-free copper, has passed GB/T5585-85, featuring a 65HB high hardness, and a 1085 ℃ high melting point, which can withstand lightning current impact up to 200KA, resistant to corrosion, heat, and impact for a long service life of more than 30 years.