Best Hachiemon in 2026

This is a saw for craftsmen made using traditional Japanese methods "MOROTEGAKE".

The vertical lines on the surface of blades made with the "MOROTEGAKE" technique reduce the drag of each stroke and smoothly remove shavings.

The double bladed saw has a ripping blade and a crosscutting blade.

This durable and easy-to-use Hand Tool Hoe and Cultivator is produced in a traditional Japanese blacksmithing factory.

Nicely balanced and is fairly pleasant to use. It has a moderate weight and it is easy to cultivate the soil.

Be very careful, this blade is super sharp. Keep it far away from children.

This ninja claw garden cultivator completely breaks up and loosens the soil into smaller pieces, allowing air and water to penetrate deeper into the soil and drain more effectively.

The wooden handle is easy to grip, compact and lightweight, which makes gardening easier.

The five tines are sturdy, lightweight, weather-resistant, rust-resistant, and require little maintenance.

It's a Wood Planer made with a traditional design used by Japanese carpenters. Great for grinding wood surface.

It is one of the most compact sizes among Japanese Wood Planer, but it is large enough for home use such as DIY.

Perfect for smaller detailed work, chamfers, end grain etc. it excels on softer woods like pine, redwood, cedar.

A double-sided grindstone for roughing and finishing small cutting tools for gardening.

Ideal for caring sickles, clippers, shears, etc.

It's small and comes with a cord that makes it easy to carry.

3 SIDED RAZOR TEETH FOR EFFICIENT CUTTING: 10" blade is ideal for cutting 5" - 6" diameter, small to medium, branches

ERGONOMICALLY DESIGNED, COMFORTABLE, CO-MOLDED HANDLE: Provides a comfortable grip for extended use

EASY TO LATCH BLADE PREVENTS INJURY WHEN NOT IN USE: Folding blade is curved, taper-ground, and replaceable

Hardened Steel Teeth

with English users manual

Teeth Designed To Prevent Clogging

The curved blade coupled with pull-cut technology results in the fastest cutting speed available - approximately 15-20% faster than straight blade PocketBoys

5-inch (130mm) Blade length, 6.8 teeth per inch teeth configuration, taper ground to reduce resistance resulting in smoother, easier, faster cutting performance. Cut capacity 2.6"

Impulse Hardening: The teeth of the blade are heated instantly and hardened and stay sharp about three times longer than non-hardened teeth

PORTABLE FOLDING HANDSAW: This professional handsaw combines superior performance and ergonomics with high-quality design. The handle is made of an arbor composite which provides excellent grip and control for wet, cold and game-processing conditions and the blade itself can be folded down. A storage case is included.

A VARIETY OF USES: This saw handles large limbs, small trunks and even many construction projects with no problem. A versatile blade for a number of jobs including pruning, trimming, branch cutting, hunting, game-processing or maintaining your lawn or garden. No matter the work you have to do, whether it be hard or delicate, this blade makes the perfect addition to your tool collection.

LIGHTWEIGHT BLADE: Blacking plating allows the entire blade, including the teeth to be coated with a unique, highly durable Nickel/Tin blend which provides a longer blade life and improved cutting performance.

【 Durable SK5 Blade】 This 6” hand saw is perfect for woodworkers, carpenters and sculptors who need fast and precise cutting. Its SK5 high-carbon steel blade is designed to be flexible yet strong, providing a smooth and accurate cut every time.

【 Non-Slip Beech Handle】 The handle of this Japanese pull saw is laser-engraved with traditional Japanese patterns, making it both beautiful and functional. The pattern provides a non-slip grip, ensuring that you have a firm hold on the saw while you work.

【 Double-Sided Design】 One side of this hand tools is 11TPI for Rip cut or cutting hardwoods such as oak and maple, the other side is 17TPI for Cross cut or cutting softwoods such as pine and spruce, making it a versatile woodworking tools that can be used for a variety of projects.

JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge.

JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts.

MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years.

QUIK LOK BLADE CLAMP: Switching blades for different applications is as easy as opening and closing the latch

ALL METAL GEARBOX: If you drop this in the middle of a job, the metal construction will help protect the internal components, so you can continue to work

COUNTER BALANCE MECHANISM: If you’re tearing through thick pieces of lumber, vibrations will be reduced with the tool’s internal counter balance measures

JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cut through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge.

JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts.

MADE IN JAPAN: All SUIZAN woodworking tools are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years.

REMOVES 2X MORE MATERIAL: RazorTOOTH saw technology; 18” blade is ideal for cutting branches up to 9-10” in diameter

MAXIMUM SHARPNESS: Each tooth is triple-ground, providing multi-faceted angles to maximize efficiency of cuts and removal of wood

UNBEATABLE STRENGTH: High carbon Japanese SK5 steel blade provides exceptional hardness

IDEAL FOR LARGE BRANCHES: 13 inch blade ideal for cutting 7 inch diameter branches

INNOVATIVE ERGONOMIC HANDLE: Pistol grip and finger hook provides efficiencies for Professional Arborists

3 SIDED RAZOR TEETH FOR EFFICIENT CUTTING: Triple ground teeth cut more material at greater angles per saw pass

RazorTOOTH SAW TECHNOLOGY removes significantly more material per pull stroke than conventional blades, finish cutting up to 2x faster

3 SIDED RAZOR TEETH efficiently cut limbs up to 6" in diameter

HIGH-CARBON STEEL BLADE made of Japanese SK5 steel for long-lasting sharpness

Aggressive Tooth Design of the hand saw cuts up to 50% faster than traditional tooth designs

The handsaw has multiple material usage for use on drywall, plastic and other building materials

Induction-hardened teeth stay sharp for long life

JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge.

JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts.

MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years.

POWERSTATE Brushless Motor: Increased cutting speed and power throught the toughtest applications

REDLINK Plus Intelligence: The most advanced system of cordless power tool electronics; provides optimized performance and overload protection using total sysem communication between tool, battery and charger

REDLITHIUM battery technology: Superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market

JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge.

JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts.

MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years.

Makita-built variable speed motor delivers 0-2, 800 strokes per minute and a 1-1/4" Stroke length for faster cutting

"Tool-less" Blade change system allows for faster blade installation and removal for increased productivity

Refined crank mechanism design minimizes blade deflection and reduces vibration

The LENOX hacksaw uses an I-beam construction, allowing the blade to tension up to 50,000 psi

Rubberized handles allow for confident handling, even in wet and cold environments

Hacksaw accepts any LENOX reciprocating saw blade to be used as a jab saw

Folding saw with durable carbon steel blade is as sturdy as fixed blade jab saws

Hand saw has faster cutting blade with triple ground teeth and ability to cut in both directions

Lockback mechanism secures the blade open at 125-degree and fully open at 180-degree

One handed design gives you superior control to standard reciprocating saws, especially when you’re working in tight conditions

Anti-vibration handle: the handle is specially designed to reduce user fatigue when ripping through heavier pieces of lumber

Quick lok blade Clamp: you need only to tighten and loosen the on-board latch near the front of the tool to be able to replace blades with ease

FAST & CLEAN CUTS: The hand saw has an exclusive tooth geometry for a fast clean cut

DURABILITY: Induction hardened teeth for a long lasting sharpness

COMFORT: Ergonomically designed bi-material handle for comfort and control

Professional interlocking fiberglass poles used by professional tree care companies in the US along with home owners

Set includes (3) 6 ft fiberglass poles & 15" heavy duty double thick blade

Rust resistant chrome plating and impulse hardened teeth hold sharpness on blade edges longer, 8" Cut Capacity

【 Larger Working Area 】 Compared with 6 Inch saw, 9.5 inch pull saw enables larger working area for more working possibilities. Meanwhile, 9.5 inch saw saves at least 50% force than 6 inch in principles of Physics;

【 Sturdy Durable Material 】 We have blade made from SK5 high carbon steel, which is known for its hardness and wear-resistant; and we have handle made from beech and rattan, which is light and ergonomic for time and force saving;

【 3-Sided Grinding Teeth 】 As woodworking professional knows, saw with 3-sided grinding teeth is sharper and wear-resistant and thus has a longer life span. Besides, the denser side teeth are quenched to be harder;

► Specification & Dimension - Total length: 11-3/4 inch (299 mm); Handle Length: 6-3/4 inch (172 mm); Saw Blade Length: 5 inch (127 mm), Saw Blade HRC 62-68.

► Faster Cutting - Precision triple ground teeth allow for smooth, faster, and effortless cutting. 8 TPI bi-metal blade cuts in both directions (push and pull). Extra secured blade to handle assembly for safety. Deep gullets between saw teeth keep the blade free of material. The Jab Saw features a sharpened tip that quickly punches through drywall or other similar materials.

► Ergonomic Handle - Anti-Slip Super Grip handle resists slipping, adding comfort. The proper size design fit most hand size and help lessen fatigue when cutting, allowing for a superior cutting angle.

Thick-body blade is exceptionally rigid for better cut control.

Tri-Ground Teeth are aggressive for fastest, smoothest cutting.

Ergonomic handle with ProTouch rubberized grip provides comfort and control.

✅ Blade Features: D6A+M2 6-inch bi-metal smooth blade, both sides have inverted teeth to increase the pulling force, three cutting surfaces leads to 50% faster than traditional versatile tooth.

✅ Ergonomic Grip Design: Lightweight jab saw with soft grip and slip-resistant handle, ergonomically designed for continuous use with minimal fatigue, more prominent handle guard for improved safety.

✅ Practical & Durable: Sharpened tip with an oblique angle for plasterboard or splint. Precision cross-ground teeth cut in both push and pull directions for fast, clean, and effortless cutting. Deep gullets between saw teeth keep the blade free of material.