Best Hi-Lift in 2026

Alleviates jack sinkage on soft surfaces

Serrated teeth along one side helps scrape or level ground for base

Drilled hole in center of base for convenient storage on jack bar

The Hi-Lift Handle-Keeper holds the Hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

Crafted from durable, transportation grade rubber

Easily slips onto Jack handle and is secured with integrated strap

The Hi-Lift 36 inch cast and steel jack is constructed with a mix of cast components and four high-strength stamped steel components

Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks

Two piece handle and socket is durable and reliable; Operation type : Mechanical. Tested and certified to meet applicable requirements of ASME B30.1-2015.

3 inch x 15 ft

Reflective loops make night recovery easier

30,000 lbs/13,607 kg rating

Specifically designed to mount and secure your Hi-Lift Jack horizontally

6061-T6 structural and anodized aluminum

No drill design

The Hi-Lift Jack 42 inch UTV Jack is a crafted with the same high quality components as standard Hi-Lift jacks, sized and equipped for use with UTVs.

Unique gold zinc-coated winch/clamp/spreader attachment

Black powder-coated jack and handle with gold zinc-coated hardware

The Hi-Lift Jack Off-Road Kit contains all the accessories needed for winching with a Hi-Lift jack all in one convenient bag. Use this kit to turn your Hi-Lift jack into an even more versatile tool.

Includes winch tensioner

Includes custom nose attachment

The Hi-Lift Jack PP-300 Post Popper is designed to remove metal T-posts, wooden fence posts, cement plugs or small stumps

Applies a tremendous amount of lifting force directly on the post, lifting it straight out of the ground

Attaches directly to T-Posts

Ideal for remote access with limited resources

Marked with luminescent tape for use in IDLH and low light atmospheres

36 square inch, 360 degree rotating base for an array of rescue options

The Hi-Lift Jack HM-825 Hood Mount for Jeep TJ models, designed and produced in the USA, makes it simple to securely mount a Hi-Lift jack in a readily accessible location - ready to use, and easy to get at, when you need it.

Mounts directly to Jeep hood hinge holes

No drilling required

Each Side Two D Rings Design: You can freely choose the hanging height according to the length of the safety chain, avoiding the safety chain being too long or dragging on the ground after hanging, resulting in rusting. D rings keeps the tow chains in a good place and helps secure the jack cover down.

Large Jack Cover Size: 14″H x 5″W x 10″D. Large size can be adapted to more different types of trailer tongue jacks.

High Quality Material: BougeRV RV jack cover is made of 600D waterproof Oxford cloth so that can keep your tongue jacks dry; D ring is thickened and widened to fit thick safety chains; Fixed belt is extra wide to carry more weight and will not break.

Product 1: Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support

Product 1: Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks

Product 1: Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity

Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support

Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks

Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity

Extended height, lightweight, steel jack stands; Sold in pairs

Lift range of 14" to 20-1/2" allows for higher clearance lite duty vehicles such as jeeps, SUV's, and UTV's

Saddle has a large surface area that provides better contact with the load being supported; Large foot base size of 8-9/16" by 7-3/16"

Pair of 3-ton jack stands with 6,000-pound capacity total (when used together)

Self-locking ratchet means no locking key is necessary; meets ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment

Stand can be raised or lowered to the height needed; self-locking ratchet for ease of use

Helps prevent RV jacks from sinking into the ground; Not intended for use with hydraulic jacks

Interlocking design and handy storage strap for easy storage

Made of heavy-duty, UV stabilized polypropylene; Includes a built-in handle for ease of use

Product 1: Easily converted from creeper to seat for your maintenance convenience

Product 1: Thick padded cushions create a comfortable base for easy access and movement during your maintenance tasks

Product 1: 6 swivel casters for easy maneuverability. Vinyl padded seat and headrest

【All-in-One Function】: Supports nearly any tongue jack foot, wheel jacks, 9” round 5th wheels hydraulic jack foot or Scissor Stabilizer and more! ELIMINATES NEARLY ALL MOVEMENT AND SWAY in parked RV's and Trailers (Less Stress on Your Trailer).

【Measurement】: About 6.3" tall, L:11.2", W:8.9" at base, L:9.8", W:7.5" at top (12" tall when double-stacked), recessed post-hole is 2-1/2" diameter. Top accommodates 9” round 5th wheels jack foot.

【New Upgraded】: Compared with others All-in-one Trailer Jack Block, we have upgraded the internal structure and the load-bearing capacity has been increased by 50%, extremely strong and durable. This is a very important security guarantee!

Sturdy stamped Steel Construction with 6 ton capacity

High quality cast ductile iron ratchet bar. Lifting range from 16 in. to 23-1/2 in

Double locks mechanism with both handle locks and mobility pin

Product 1: Sturdy stamped Steel Construction with 6 ton capacity

Product 1: High quality cast ductile iron ratchet bar. Lifting range from 16 in. to 23-1/2 in

Product 1: Double locks mechanism with both handle locks and mobility pin

the Scissor Jack Socket into your power drill are Simply insert,Works with all 3/4" Hex drive jacks/Scissor Recreational Vehicle Jack Trailer Stabilizers;

Reduces time and effort to raise or lower scissor jack;

Designed to work with 1/4-inch hex quick connect chucks;

Supports nearly any tongue jack, post, foot, or stabilizer (round or square)

10,000 lbs. capacity

Stackable

Helps protect your electric tongue jack from harsh weather that can degrade it over time

3 layers of breathable spunbond polypropylene provides protection from harmful UV rays, excess moisture and dirt and debris

Form fit shape with adjustable drawstring closure

Suited for all environments

The package length is 6.6 centimeters

The package height is 18 centimeters

TRAILER STABILITY. Add stability to your trailer with this simple but sturdy trailer jack foot. It attaches to the trailer jack and allows for increased stability of the trailer tongue when parked or loading

RELIABLE STRENGTH. Perfect for a wide variety of trailer types, this trailer jack foot plate is rated to support up to 2,000 pounds tongue weight

VERSATILE DESIGN. Great for use as a trailer jack foot replacement, the versatile mount fits virtually any trailer jack with a 2-inch diameter tube

Sturdy stamped Steel Construction with 3 ton capacity

High quality cast ductile iron ratchet bar

Double locks mechanism with both handle locks and mobility pin

Alleviates jack sinkage on soft surfaces

Serrated teeth along one side helps scrape or level ground for base

Drilled hole in center of base for convenient storage on jack bar

The Hi-Lift Handle-Keeper holds the Hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

Crafted from durable, transportation grade rubber

Easily slips onto Jack handle and is secured with integrated strap

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars,ATV's, UTV's, and more

Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported.Saddle Diameter:3.35 inch

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, ATV's, UTV's, and more

Features a lifting range of 15-3/8" to 23-13/16" with a 6 ton (12,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%