Best Hinyefir in 2026

FITS: For Ford F150 F250 F350 4.6L 5.4L V10 Engines 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009.

FUNCTION: This removal tool helps remove the broken manifold studs.

INCLUDES: 1 set exhaust manifold broken stud removal tool, as the main picture shown.

FITS: For install and remove all truck brake springs. Universal fit for all eaton air brake shoe anchor springs, models：LT895.

ADVANTAGE: The grooved end on the tool always keeps the spring at the correct working angle. So you can easily connect the spring.this makes it easier to remove or install the spring.

MATERIAL: Made of high-quality steel, with high hardness, good corrosion resistance and rust resistance, and long service time.

ADVANTAGE: Accelerate pouring with flexible spout, and each can has a vent hole inside that allows you to empty the can quickly. The opening can also match perfectly with the flexible or fixed nozzle, which easily locks onto the can and allows you to tip it over and place it into the fuel neck on the vehicle without spilling everywhere.

PREVENT LEAKAGE: With the bayonet closure which seals the lid tightly, and the latch is fixed with a locking pin to effectively prevent accidental opening while you're on the road.

CONVENIENT: The gas can comes with 3 handles, can be held by two persons to save labor when you lift the tank. Perfect for the rugged off-road as the emergency backup cans.

【For Car DIYers And Beginners】This plug-and-play Autel scanner MS300 can pay for itself in the first use. It communicates with vehicles through standard 16-PIN OBD2 cable and it’s powered by vehicle directly (no battery needed). It capable of scanning vehicle Diagnostic Trouble Codes (DTCs) in seconds to pinpoint emission-related issues. The little guy should be a member of your toolbox, always in your car and ready to be taken out and used.

【Read Codes & Clear Codes In Seconds】Getting diagnostic codes(DTCs) should be the start of all repairs if you don't want to be ripped off. You can use MS300 to read the codes in seconds and look them up to quickly locate the problem areas, then determine if you can do the repair yourself or go to a mechanic, and clear the codes to get everything back to normal.

【Turn Off Check Engine Light】The check engine light is always annoying you, most of the time because of a little thing, isn't it? Maybe it's just a gas cap that's not tightened but you paid hundreds of dollars for it? With Autel MS300 scan tool, you can read code to quickly find out why the check engine light is on and reset it.

Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles

Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed

Durable construction - this kit is made from quality components to ensure reliable performance and a long service life

PROFESSIONAL STRAIGHT EDGE: Our straight edge tool is designed to be used with feeler gauges to complete engine work; Straight edge tool for cylinder heads features a machined straight edge, making inspections for distortion and flatness easy

USEFUL FOR MANY AUTOMOTIVE REPAIRS: These machinist tools allow you to inspect for flaws on engine blocks, cylinder heads, fly wheels, main bearing saddles, cam bearing saddles, cam covers, and bell housings

ACCURATE STRAIGHT EDGE: This machinist straight edge features a precision ground edge to +/- 0.001 inch for inspections; These straight edges provide true precision, eliminating the imprecision of visually inspecting cylinder heads for flaws

A simple way to expand a warped manifold so all bolt holes are accurately aligned

Helps prevent cross-threading of manifold bolts

Works best when used in pairs or install before removing manifold to prevent misalignment

Fitment: This Exhaust Manifold Bolt Set Compatible with Dakota V8 4.7L Club Cab 2WD 05 06 07 08 09 10 11 , 1500 V8 4.7L Laramie Quad Cab 2WD, Laramie 2005 2006 2007 2008 2009 2010, Commander 8 Cyl 4.7L Base 2WD, Base 4WD, Limited 2W 06 07 08 09, Grand Cherokee 8 Cyl 4.7L Laredo 2WD, Laredo 4WD, Limited 05 06 07 08 09

Interchange/ Part Number: 6505316AA, 6507746AA, 6508219AA, 6508220AA, Specification: Thread Size: M6-1.0, Thread Size: M8-1.25, Material: Steel, Length: 2.82 In

Package included: 4 Studs(2 Long & 2 short), 4 Bolts and 4 Nuts

Innovative fix - this exhaust manifold to cylinder head repair clamp fixes a leaking exhaust due to broken manifold bolts

Complete kit - comes with clamp and bolts for solid repair

Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience

stainless steel exhaust manifold studs and stainless steel serrated face flange nuts.

stainless steel exhaust manifold stud kit will replace the factory hardware that rust and break on Ford 4.6liter and 5.4liter engines

Reference Numbers: N811313S431, W701706-S2

Meets Or Exceeds OEM Specs

Factory OEM Fit Form And Function

♥Compatible Fitment - Manufacturer Part Number:N811313S431,W701706-S2.Each exhaust studs and nuts have 2 years warranty.

♥Premium Quality - Exhaust manifold studs and nuts kit is made of high standard 304 stainless steel,heat-treated for enhancing its stable performance and durability.Wear resistance, anti-rust and corruption resistance.

♥Suitable Size - Compatible With Ford 4.6 5.4 exhaust manifold studs thread Size: is M8*50,thread pitch 1.25.All parts are engineered and tested to meet or exceed original standards and performance.

Designed and manufactured to meet the needs of the exhaust system repair environment.

Verified, tested and certified proprietary Organic coating resists corrosion.

Tightly controlled coefficient of friction ensures reliable installation.

Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles

Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed

Durable construction - this kit is made from quality components to ensure reliable performance and a long service life

This Pipe For: Mini bikes, go karts, generators, Predator Tillotson 196cc 212cc, Hemi Engine

We Use True Image Of the Product Without Any Image Edit.

12 Gauge Pipe, Chrome Coated Surface Finished.

Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles

Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed

Durable construction - this kit is made from quality components to ensure reliable performance and a long service life

Upgraded materials - this replacement exhaust manifold is constructed of ductile iron to prevent future warping and cracking

Complete kit - includes new manifold, manifold gasket, flange gasket, 3 studs, 3 nuts

Direct fit - reverse engineered from original equipment for seamless installation

Direct replacement - this exhaust bolt matches the fit and function of the factory part on specified years, makes and models

Ideal solution - this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles

Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed

Durable construction - this kit is made from quality components to ensure reliable performance and a long service life

Corrects geometry for throttle valve cables

Provides proper transmission fluid pressure

Designed For vehicles with GM 700R-4 automatic overdrive transmissions

Applicable Engine : Four-cylinder EA888 petrols: 1.8 R4 16v TSI/TFSI, 2.0 R4 16v TSI/TFSI. compatible with VAG series 2006-2018 TSI, TFSI EA888 engine(1.8L, 2.0L).Engine Code: BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND, CESA, CETA, CFKA, CGYA, CJEB, CJBA, CJSB

Applicable Vehicle: Replace OEM: T10352, T10352/1, T10352/2, T10368, T40196, T10354, T10060A, T40011, T40098, T40267, T40271. Compatible with VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, VW CC, VW Scirocco, VW Golf Mk6 GTI, VW Scirocco, VW Passat B6, VW CC. Compatible with Audi A3 A4 A5 A6 Q5 TT/ TT Quattro 2.0T

More Tool: This timing tool kit have 23pc, used for correct the camshaft and crankshaft timing position, include camshaft intake and exhaust adjusting tool, had everything you needed to do a timing chain replacement, also is a must tool for timing chain replacement job, 23pc complete tools let you more efficient

SIMPLE BUT POWERFUL: XtremepowerUS 1/3 HP 4 CFM 1-Stage Rotary Air Vacuum Pump is designed to have high efficiency and low noise output with internal high volume cooling fan for extended use

HEAVY DUTY CASING: Die-cast Aluminum Alloy Casing enables the vacuum pump be light and durable at the same time. Equipped with brass fitting tethered safety caps to prevent oil leaks during transportation and handling

EASY OIL CHANGE: The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned beneath the oil reservoir to quickly drain when needed. Checking the spillage meter will help to ensure the proper level of oil

COMPLETE GAUGE SET: This professional automotive AC tool kit from Orion Motor Tech includes a 3-way gauge, 3 color-coded hoses, 2 adjustable 1/4'' quick couplers, a 1/4'' to 1/2'' adapter, and both self-sealing and puncture-style can taps; enjoy hassle-free setup and easy operation as you nip your HVAC problems in the bud

HYBRID ANTISHOCK GAUGES: The 2.6" high and low pressure gauges combine the best features of dry and liquid-filled designs, with an oil-filled core resisting wear and shock and a dry dial providing better winter performance; the moisture indicator monitors your coolant’s condition in real time; and calibration screws and superior design provide ±1.6% accuracy

COLOR-CODED HOSES: Blue for low, red for high, and yellow for charging, these durable PVC hoses have 4 reinforced layers to work with daily pressure up to 600 psi (burst pressure: 3000 psi); built-in barriers ensure the purity of your refrigerant by condensation and other moisture as you work

Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles

Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance

Complete repair - includes all necessary gaskets and downpipe hardware

Pipes Have Been Upgraded To Stainless Steel; Flex Joints & Flange Still Made Of Standard Steel For Natural Thermal Expansion/Contraction

Package Include: 1 x Exhaust Manifold, all necessary gaskets and downpipe hardware; Included heat shield, Includes flex bellows

Replace Part Number: 33007072, 4883385, 674-196, 10105812

Upgraded materials - this replacement exhaust manifold is constructed of ductile iron to prevent future warping and cracking

Complete kit - includes new manifold, manifold gasket, 2 studs, 2 nuts

Direct fit - reverse engineered from original equipment for seamless installation

Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles

Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance

Complete repair - includes all necessary gaskets and downpipe hardware

Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles

Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance

Complete repair - includes all necessary gaskets and downpipe hardware

Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles

Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance

Complete repair - includes all necessary gaskets and downpipe hardware

Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles

Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance

Complete repair - includes all necessary gaskets and downpipe hardware