Best Hooto in 2026

NBR fuel line 3/8 specification: ID: 3/8" (10mm), OD: 5/8 inch (16mm), material: NBR, Length: 10FT,Working Pressure: 1.8Mpa, Burst Pressure: 5.6Mpa, Temperature Range: -40°F to 248°F.

NBR Push on Hose Fuel Gas Line with Clamps Application: 30r7 fuel line 3/8 widely used in fuel system, oil cooling system, steam emission system, PCV system, etc.

Fuel Line 3/8" ID NBR Hose Applicable Medium: 3/8 fuel line fit for small engine, it can work with diesel, biodiesel, gasoline, Oil, grease,water and air,etc.

The vf3500 filter rigid fit for ridgid VF3500 filter, 3-Layer replacement filter vf3500 for Ridgid VF3500 3-4.5 gallon portable vacuums WD3050, WD4070, WD4080, WD4522, 4000RV, 4500RV.

3-Layer dust filter fit any 3-4.5 gallon Portable Wet/Dry Vacuum dust filter. vf3500 replacement filter rigid using with the 3-layer design, this rigid filter vf3500 picks up 99% of material that is 1/2 micron or larger, perfect for ash, superfine dust, dirt, sawdust and more.

This wet/dry shop vac filter vf3500, 3-layer pleated design, make the filter have larger surface area to capture more particles, effectively improve the air quality. Improve your health and the look of your living or work area,keep your workshop and home clean.

The complete wiring harness kit fits almost Chinese made 4 stroke QUAD / ATV 150CC 200CC 250CC 300CC Go Kart and dirt bike.

The complete wiring harness compatible with Lifan Loncin Ducar Shineray Zongshen YX and others with GY6 engine motorbikes Mini ATV / QUAD 150CC 200CC 250CC 300CC Go Kart and dirt bike(DO NOT FIT:GY6 engine motorbikes and other Mini ATV / QUAD 50CC 70CC 90CC 110CC 125CC with different stator or CDI).

The complete electric wiring harness kit includes: 1x ATV wiring harness, 1x ATV Stator 8 Coil, 1x CDI(6Pin AC), 1x Ignition Switch, 1x Upgraded Multi-functional ATV Switch, 1x Spark Plug, 1x Rectifier, 1x Ignition Coil with Lead, 1x Solenoid Relay.

This complete wiring harness kit fits almost Chinese made electric start upright engine 50cc 70cc 90cc 110cc 125cc engines. Quad Wire Harness Kits for GY6 4-Stroke ATV, Coolster, Quad Bike, Dirt Bike, Pit Bike, Go Kart, 4 Wheelers, Scooter,Buggy, Taotao, Motowork, Dune.

This complete wiring harness for 125cc atv fits for most of Chinese made 50CC 70CC 110CC 125CC ATV / QUAD and Dirt Bike(DO NOT FIT: GY6 engine motorbikes and other Mini ATV / QUAD 150CC 200CC 250CC 300CC with different stator or CDI), suitable for brand of engines: Lifan, Loncin, Ducar, Shineray, Zongshen.

This complete electric wiring harness kit includes: 1x ATV wiring harness, 1x ATV Stator 6 Coil, 1x CDI(5Pin AC), 1x Ignition Switch, 1x Upgraded Multi-functional ATV Switch, 1x Spark Plug, 1x Rectifier, 1x Ignition Coil with Lead, 1x Solenoid Relay.

Triple gauge kit oil/volt/water gauge includes oil pressure, voltage, and water temperature, is made of high quality instrument materials, stable performance, reliable quality. Comes with complete accessories for installation.

This volt triple gauge kit fits for GM - CHEVY, FORD, GMC, CADILLAC, OLDS, PONTIAC, BUICK & MOPAR - DODGE, CHRYSLER, PLYMOUTH and so on.

Tjhe 2'' triple gauge kit with LED back-lit gauge, has high sensitivity and unparalleled accuracy. Numbers and pointer clearly show, Lighting on the dial for easy reading in the darkness.

【Widely used】This matte black front door handle set fits most standard-sized doors from 1-3/8 inch to 1 3/4 inch thickness, fits most decoration styles, and suitable for both commercial and residential applications.

【High quality material】This black front door handle is made of high quality zinc alloy, strong and durable, long service life, The front door handle set adopts advanced electroplating coating technology, matte black surface treatment, has the function of rust and corrosion resistance.

【Adjustable Design】This front door handle black fits most standard-sized doors, the latch can be adjusted from 2-3/8 to 2-3/4 inch, the hole drill for adjustable through bolt can move up and down 1 1/2 inch. Reversible handle perfect fit the most standard residential, left or right handed standard doors.

【Widely used】The rattan placemats set of 6 are suitable for placing under plates, bowls, cutlery, tea sets, teapots, pots, tableware, cups and more, and rattan placemats are used widely in kitchen, dining table, meal time, outdoor picnic or other occasions, meeting different placing requirements.

【High Quality Material】Our natural seagrass place mats for dining table are made of premium natural seagrass plus inside metal wire frame, strong and durable, non-slip, heat-resistant, anti-scalding feature will effectively prevent your table from hurt.

【Perfect Size】6 pack rectangular woven placemats, rattan wicker table mats, with the size of 430mm x 300mm (17" x 12") perfect match for various tables and suitable for any plate, meeting different placing requirements.

Engine timing tool kit compatible with Ford duratec petrol engine 1.25, 1.4, 1.6, 1.7, 1.8, and 2.0 twin cam 16V engine camshaft timing tool; compatible with Ford duratorg diesel engine 1.4, 1.6, 1.8, 2.0 TDCI ngine camshaft timing tool; compatible with Ford Escoboost 1.6 Ti-VCT, 1.5/1.6 VVT ngine camshaft timing tool.

Engine timing tool flywheel locking tool kit replacement part number: 303-1097/ 303-748/ 303-1550/ 303-1552/ 303-1054/ 303-1059/ 303-735/ 303-1552/ 303-393A/ 303-393-01/ 303-393-02/ 303-376B/ 303-651/ 303-193/ 303-507/ 303-734/ 303-732/ 303-extra.

Engine camshaft timing tool set fit for engine code: 1.25 16V (DHA, DHB, DHC, DHD, DHH, DHG, F8JA, F8JB, FUJA, FUJB, M7JA, M7JB) ; 1.4 16V (ASDA, ASDB, FHA, FHD, FHE, FHF, FXDA / C, FXDB / D, FXJA, FXJB); 1.6 16V (FYDA / C, FYDB / D, FYJA, FYJB, L1F, L1J, L1L, L1N, L1O, L1T, L1V, L1W, HWDA, HWDB); 1.7 16V (MHA, MHB); 1.8 16V (EYDB, EYDC, EYDD, EYDE, EYDJ, EYDG, EYDI, EYDJ, EYPA, EYPC, RKA, RKB, RKF, RKH, RKJ, RKK).

JK locking gas cap fit for jeep wrangler gas cap cover compatible with 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Jeep wrangler JK JKU unlimited rubicon sahara fuel filler door locking gas tank cap cover.

The fuel filler door cap cover secure locking design and rubber gasket, locking fuel door provide a better security to your gas tank, fit for 2007 - 2018 Jeep wrangler JK 2-door/4-door.

The fuel door cover with Lock is made of high quality ABS plastic and aluminum alloy, strong and durable.

【Heavy-duty 5/16 Tractor Bucket Hooks】5/16 tractor bucket hooks is Grade 70 rated at 6,600 LBS (working load limit), with breaking strength up to 15,400 LBS.

【Versatile Tractor Bucket Grab Hooks】Tractor bucket grab hooks 5/16 can be used on a wide range of tractors and loaders, also as a tow hook work well for tractor bucket, RV, UTV,Truck.Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors.

【High Quality Tractor Bucket Hooksl】The tractor bucket hook is made from high-quality materials, these tractor bucket grab hooks are built to last. They are resistant to rust and corrosion, ensuring they will serve you well for years to come.

8mm folding foot pegs are universal for motorcycle/bicycle which use 8mm install bolts, compatible with 8mm Aprilla, BMW, Honda, Kawasaki, Ducati, Suzuki, Yamaha, Triumph, MV Agusta, Bimota, Buell, Momo Guzzi, etc.

8mm folding foot pegs are made of high quality T6061-T6 aluminum alloy, CNC machined, plating anodized finishes to prevent from oxidizing and scratches, durable.

8mm folding foot pegs are cylinder shape carved with non-slipping wave grooves. Easy installation, No Installation Instruction, directly replaces stock footrest.

【Replacement for Yamaha Big Bear carburetor】YFM400 carburetor replacement for 2000 2001 2002 2004 2005 2006 Yamaha Big Bear 400 YFM400 carburetor, replacement for 2000 2001 2002 2003 2004 2005 2006 Yamaha Big Bear 400 YFM400F carburetor, replacement for 2000 2001 2002 Yamaha Big Bear 400 YFM400FH Hunter Edition carburetor, replacement for 2003 Yamaha Big Bear 400 YFM400FW carburetor.

【compatible with Yamaha carburetor】YFM400 carburetor compatible with 2000-2006 Yamaha Kodiak 400 YFM400A carburetor, compatible with 2000-2006 Yamaha Kodiak 400 YFM400FA YFM400FAH Hunter Edition carburetor, compatible with 2000-2002 Yamaha Kodiak 400 YFM400FAH Realtree Xtra carburetor, compatible with 2007-2011 Yamaha Grizzly 350 YFM350G YFM350FG carburetor, compatible with 2008-2011 Yamaha Grizzly 350 YFM350FGH carburetor, compatible with 2007-2012 Yamaha Grizzly 450 YFM450FGH carburetor.

【YFM400 carburetor size】 Inner diameter (intake side): 33mm/1.3inch, outer diameter (intake side): 37mm/1.46inch, inner diameter (air filter side): 48mm/1.89inch, outer diameter(air filter side): 52mm/2.0inch.

【Wide range of application】The black candle holders can be use in living room, bedroom, bar, dinner table, to create a romantic atmosphere for wedding, home decor, party, halloweseen birthday Christmas, thanksgiving day or other special occasions.

【High quality material】 The black taper candle holders are made of high-quality metal material, with bright surface, brushed metal design, gloss and powder coating to prevent rust or chipping.

【Unique matte taper candle holder】The matte black taper candle holders, set of 6 candlestick holders, tall candle holders with 3 different heights:2.68inch×6.3inch×1.3inch, 2.68inch×7.9inch×1.3inch, 2.68inch×9.0inch×1.3inch. Suitable for 3/4inch candles and led taper candles to create an elegant visual effect and provides you a pretty romantic atmosphere.

【Widely Applications】These router bits fit for woods, MDF, solid wood, particle board, plywood, wooden door frames, wooden window frames, wooden cabinets and boxes, etc. Avoid cutting ferrous metal and non wood materials, such as steel, iron and rock, etc.

【High quality material】These router bits set made of high-quality alloy blade, sharp carbide tipped router bits with excellent resistance to heat, makes clean and accurate cuts on all types of wood. It is perfect for woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters.

【Universal 1/4 inch Shank】Router Bit Kit 1/4 Inch Shank provide greater stability and less vibration during use, suitable for 1/4" all models of routers, milling machines, woodworking machinery, tenon and various wood carvings.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 5.56 mm (0.22 inch), Outer Diameter: 11.17 mm (0.44 inch)

Working Temperature: -40°F to +300°F

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 11.12 mm (0.44 inch), Outer Diameter: 17.2 mm (0.68 inch)

Working Temperature: -40°F to +300°F

ID: 1/2inch (13mm);OD: 0.75inch(19mm).Material: NBR.

Working Pressure: 217psi.Max Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 4.7inch(120mm).

Applicable Medium: 1/2 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

ID: 3/8inch (10mm);OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

ID: 5/16". OD: 0.43inch.Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000 psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

ID:5/16". OD:0.465inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

ID: 13/32". OD: 0.543inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.AN8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium:8AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

25 Feet of multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line

Can be used with unleaded gasoline, diesel fuel, gasoline blends of ethanol (E-10), E-85 and sour gas

Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

[Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F (-40°C to 125°C);Min bending radius:63.5mm.

[Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.

ALL-IN-ONE FUEL: Ditch the gels, bars, chews, and pills and go all day with just Tailwind. Tailwind mixes with water to meet your calorie, hydration, and electrolyte needs, no matter how big a day’s in front of you.

NO GUT BOMBS: Sipping Tailwind provides steady, small doses of fuel that pass right through the stomach. The composition of Tailwind’s fuel matches what the gut is made to absorb, so Tailwind enters your system quickly, without taxing the digestive tract and causing stomach issues.

TASTY ALL DAY: If you don't like the taste, you won't drink it. That's why Tailwind has light, clean flavors that taste better the longer you go.

[Size] ID of 10an fuel hose:0.56"(14.22mm),OD:0.78"(19.8mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:101.6mm.

[Application] 10AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.

Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.

Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.

[Size] ID of 8an fuel hose:0.43"(10.9mm),OD:0.64"(16.25mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:88.9mm.

[Application] 8AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

[Size] ID of 10an fuel hose:0.56"(14.22mm),OD:0.78"(19.8mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:101.6mm.

[Application] 10AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.