Best Hordion in 2026

High-Quality Material: The 3 inch hole saw is made of M42 bimetal, with hardness up to 65HRC, with higher toughness, stronger wear resistance and higher performance cutting strength

Dimensions: Cutting Diameter: 75mm / 3"; Cutting Depth: 32mm / 1.3"; Shank Diameter: 10mm / 0.4"; Total Length of Shank: 97mm / 3.8"

Fast & Smooth Cutting: The sharp tooth edge design makes the cutting smooth and fast. More than that, the spring on the drill is very good because it automatically pushes the disc out of the saw after completing the hole

High-Quality Material: The 2 3/8" hole saw is made of M42 bimetal, with hardness up to 65HRC, with higher toughness, stronger wear resistance and higher performance cutting strength

Dimensions: Cutting Diameter: 60mm / 2 3/8"; Cutting Depth: 32mm / 1.3"; Shank Diameter: 10mm / 0.4 "; Total Length of Shank: 95mm / 3.7"

Fast & Smooth Cutting: The sharp tooth edge design makes the cutting smooth and fast. More than that, the spring on the drill is very good because it automatically pushes the disc out of the saw after completing the hole

Package Includes: 1 x 7/16" hole saw arbor, 1 x 1/10" L hex wrench, 1 x 1/6" L hex wrench, 3 x 6mm drill bit

High-Performance Material: The 7 / 16-inch shank hole saw arbor adapter is made of high-quality alloy steel material to ensure heavy load and ultra-fast connection speed

Wide Range of Applications: The hole cutter shaft can be connected to 1.4" to 15.7" hole saw, excellent function, because the hexagonal shank cutter bar on the market can only connect large holes from 1-1 / 4 inch to 6-3 / 8 inch saw

High-Quality Material: The 3-1/2 inch hole saw is made of M42 bimetal, with hardness up to 65HRC, with higher toughness, stronger wear resistance and higher performance cutting strength

Dimensions: Cutting Diameter: 90mm / 3-1/2"; Cutting Depth: 32mm / 1.3"; Shank Diameter: 10mm / 0.4 "; Total Length of Shank: 95mm / 3.7"

Fast & Smooth Cutting: The sharp tooth edge design makes the cutting smooth and fast. More than that, the spring on the drill is very good because it automatically pushes the disc out of the saw after completing the hole

High-Quality Material: The 6 inch hole saw is made of M42 bimetal, with hardness up to 65HRC, with higher toughness, stronger wear resistance and higher performance cutting strength

Dimensions: Cutting Diameter: 150mm / 6"; Cutting Depth: 32mm / 1.3"; Shank Diameter: 10mm / 0.4 "; Total Length of Shank: 95mm / 3.7"

Fast & Smooth Cutting: The sharp tooth edge design makes the cutting smooth and fast. More than that, the spring on the drill is very good because it automatically pushes the disc out of the saw after completing the hole

Industrial Grade Structure: This 1 3/8 inch hole saw uses high-quality TCT cemented carbide. Carbide tipped hole cutters are an excellent alternative to traditional bimetal hole saws. The excellent durability of TCT hole saws is unmatched by bimetal and HSS hole saw

Fast & Accurate Cutting: Carbide technology and optimized tooth profile make cutting faster, more precise, smoother and longer service life, reducing the chance of tooth chipping. At the same time, the cutter body cuts clean and burr-free holes faster than traditional twist drills or hole saws

Size: Cutting Diameter: 1 3/8" / 35mm, Cutting Depth: 1" / 25mm, Total Length: 3.1" / 78mm, Drill Bit Diameter: 0.24" / 6mm, L-Wrench Diameter: 0.12" / 3mm

Industrial Grade Structure: This 1 inch hole saw uses high-quality TCT cemented carbide. Carbide tipped hole cutters are an excellent alternative to traditional bimetal hole saws. The excellent durability of TCT hole saws is unmatched by bimetal and HSS hole saw

Fast & Accurate Cutting: Carbide technology and optimized tooth profile make cutting faster, more precise, smoother and longer service life, reducing the chance of tooth chipping. At the same time, the cutter body cuts clean and burr-free holes faster than traditional twist drills or hole saws

Size: Cutting Diameter: 1" / 25mm, Cutting Depth: 1" / 25mm, Total Length: 3.1" / 78mm, Drill Bit Diameter: 0.24" / 6mm, L-Wrench Diameter: 0.12" / 3mm

Industrial Grade Structure: This 2 3/4 inch hole saw uses high-quality TCT cemented carbide. Carbide tipped hole cutters are an excellent alternative to traditional bimetal hole saws. The excellent durability of TCT hole saws is unmatched by bimetal and HSS hole saw

Fast & Accurate Cutting: Carbide technology and optimized tooth profile make cutting faster, more precise, smoother and longer service life, reducing the chance of tooth chipping. At the same time, the cutter body cuts clean and burr-free holes faster than traditional twist drills or hole saws

Size: Cutting Diameter: 2 3/4" / 70mm, Cutting Depth: 1" / 25mm, Total Length: 3.1" / 78mm, Drill Bit Diameter: 0.24" / 6mm, L-Wrench Diameter: 0.12" / 3mm

Package Includes: 1 x 3" hole saw, 1 x 7/16" hole saw arbor, 1 x hex shank drill bit adapter, 1 x 1/10" L wrench, 1 x 1/6" L wrench, 2 x 6mm drill bit

Professional Cutting: 76mm hole saws are designed to cut round holes in corn hole boards, drywall, wood boards, wood, thin slate, plastic, soft plaster, acrylic boards and thin metals

High-Performance Materials: The 3 inch hole saw is made of M42 bimetal, with hardness up to 65HRC, with higher toughness, stronger wear resistance and higher performance cutting strength

Professional Cutting: This 6 5/8" hole saw bit is designed for wood / plastic cutting. Very suitable for making Cornhole Boards

Sharp Teeth: The teeth are sharp, the vibration is small, more stable operation, and can cut holes quickly and balancedly

Widely Used: Suitable for pistol drill, bench drill, vertical drilling machine, etc. Widely used in hole openings for board holes, household wood, galvanized pipes, fire hoses, plastics, gypsum boards, air ducts, speakers and other opening operations

Professional Cutting: This 135mm hole saw is designed for wood / plastic cutting. Very suitable for making Cornhole Boards

Sharp Teeth: The teeth are sharp, the vibration is small, more stable operation, and can cut holes quickly and balancedly

Clean Edge Design: The hole saw uses a non-binding clean edge design, which cuts smoothly and easily. After drilling the hole, the spring on the drill bit will automatically push the disc out of the saw

Conducting Baton Length: 15inches / 38.5cm, Maximum Handle Diameter: 0.87inch / 2.2cm

High-Quality Material: The baton is made of glass fiber. The handle of the baton is made of high-quality plastic. It's very durable

Maximum Comfort: The pear-shaped baton handle is very comfortable and easy to grip. The pear-shaped design is very beautiful and elegant. The baton shaft is straight and even, looks great

Professional Concrete Hole Saw Kit: This hole saw kit provides hole saws with 3 diameters (1-2/11", 1-9/16", 2.36") to meet your professional needs. Allows you to quickly drill the most commonly used size clean holes

Fits SDS Plus Hammer Drills: The design of SDS lengthened shank bit and male thread adapter makes your drill chuck more tightly matched, which can greatly increase the drilling speed and make your hammer drill more useful than before

Rugged & Durable: Made of high-quality YG8C alloy, very durable and impact-resistant, and can provide you with many years of service even under severe use conditions

Package Includes: 1 x 2" hole saw cutter, 1 x 7.95" connecting rod, 1 x 0.28" drill bit, 1 x screw

Industrial Grade Material: Made of high-quality YG8C alloy, which is very durable and impact resistant. At the same time, using high-frequency welding technology, the welding joint is very firm, the inner and outer welding joints are smooth, the joint is accurate, and the cutting is more perfect and precise

SDS Plus Shank Design: The connecting rod handle adopts SDS PLUS design, and the male thread adapter is convenient to be used with the round shank four-pit electric impact drill

Neck mounting screws specially designed for electronic guitars to help connect the body and neck.

Retain the string to reduce the string friction,and keep more accurate tuning.

Easy to install and convenient to use, also lightweight and easy to carry and use.

Application: It fits for 6 string Tele style and Strat style electric guitar.

Hardtail Guitar Bridge : Made of zinc alloy; String Spread is 2.11" / 53.7mm and baseplate size is 2.55" x 1.65" / 65 x 42mm (L x W).

Easy to Use: Top loading saddle design to be easy to install and easy to use, and can be adjusted horizontally for intonation and height.

【What You Get】4pcs Round Adjustable Furniture Legs, 16pcs Screws, color: black. -- Size: furniture legs: 4.7inch; Mounting base: 2.36x1.97inch.

【Sturdy and Durable】Made of high quality aluminum alloy and ABS plastic, anti-corrosion and rust, cushion at the bottom has a good anti-skid effect, great for a long time using.

【Easy To operate】There are four holes on each mounting base. Tighten the screws with a screwdriver to fix the cabinet feet well.

4/4 Cello Bridge Maple Cello Fitted Bridge Cello Parts

Compatible with 1/4 - 1/8 Violins: Designed to fit 1/4 and 1/8 violins.

Perfect Fit: Hordion violin shoulder support includes height-adjustable feet that can be customized to fit. The feet can also be folded for easy storage in the violin case.

Ergonomic Design: This violin shoulder rest has a curved rod. It is very suitable for the shape of the human shoulder, which can prevent the violin from falling off and eliminate the pressure on the chin and neck. Provide you with a natural and comfortable experience.

Package Includes: 1 x violin chin rest for 1/4 1/8

Necessary Tools for Violin: The chin protector pad can be used to protect your violin from being scratched by clothing, etc. At the same time protect your skin, shoulders, and chin from varnish, metal, and strings.

High‑Quality: The violin shoulder rest is made of high quality cotton material, which is strong and durable, comfortable and soft to the touch, washable and reusable, and with a long service life.

Package Contains: 2 x 1/4" mono jack socket

End pin jack for acoustic and electric guitars

Can be tightened from the outside of the guitar to facilitate installation

Double tooth design strengthens each tooth for longer life and improved durability

Sharper Tooth Geometry cuts material faster for faster drilling

Thick, hardened backing plates prevent thread stripping

Folding saw with durable carbon steel blade is as sturdy as fixed blade jab saws

Hand saw has faster cutting blade with triple ground teeth and ability to cut in both directions

Lockback mechanism secures the blade open at 125-degree and fully open at 180-degree

What You Will Get - 18PCS diamond drill bits (different sizes), 1PC lettercarving knife

Various Sizes - Our drill bit set comes with 18 different sizes featuring 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 30mm, 35mm, 40mm and 50mm, can meet your different needs.

⁣Flawless Performance - Diamonds on the tip of the bit, ensuring smooth punching and making the drilling process easier, precise cutting and no rough edges.

Double tooth design strengthens each tooth for longer life and improved durability

Sharper Tooth Geometry cuts material faster for faster drilling

Thick, hardened backing plates prevent thread stripping

2X more durable with 50% longer life than previous LENOX hole saws

Increased wall thickness improves durability and minimizes tooth loss

Optimized tooth design penetrates metal with ease

2X more durable with 50% longer life than previous LENOX hole saws

Increased wall thickness improves durability and minimizes tooth loss

Optimized tooth design penetrates metal with ease

Progressor tooth design cuts faster and lasts longer in wood and metal applications

Reinforced shoulder for added strength and longer life

8 percent cobalt alloy for longer life and higher heat resistance

2X more durable with 50% longer life than previous LENOX hole saws

Increased wall thickness improves durability and minimizes tooth loss

Optimized tooth design penetrates metal with ease