Best Horsebiz in 2026

Best Soldering Iron Tip Cleaner and Base Holder.

No Water Required, Not Reduce The Tip Temperature.

Made From Brass Wire, Cleans Better Than Conventional Sponges.

Dual Serial Device Server: Cpu: Cortex-M4 120Mhz, Serial RS485 & RS232 to Ethernet Server, 2 Serial Ports: 1 Port is RS232, 1 Port is RS485, 1 RJ45 Ethernet Port. Support RS232 & RS485 Working at The Same Time.

Data Link Protocol: Ip£¬Tcp£¬Udp£¬Dhcp£¬Dns£¬Http£¬Arp£¬Icmp£¬Web Socket£¬Httpd Client.

Speed: 10 / 100 Mbps, Mdi / Mdix Cross Direct Automatic Switching, Baud Rate: Rs-232£º600Bps ~ 230. 4Kbps£¬Rs-485£º600Bps ~ 1Mbps; 1.5Kv Electromagnetic Isolation, Shell Isolation Protection; Anti-Static 2Kv, Lightning Protection.

Lead free (RoHS Compliant)

Removes tip oxidation

No-Clean compatible formulation

Reduce Residue on Tip: Weller's Soldering Brass Sponge effectively remove residual solder from your soldering tools without damaging your tips.

Prevent Tip Cool Down: Maintain tip temperature when compared to cellulose sponges, improving the productivity and quality of solder joints.

Easy to Use: Remove solder residue quickly and easily by simply inserting your soldering tip into the center of the Brass Sponge Tip Cleaner during and after use.

Size: length 186 x width 84 mm.

Applicable models: FX-600, FX-601, PRESTO, DASH

Weight: 380 g.

Cleans Tip Without Messy Wet Sponges

Uses Low Abrasive Brass, No Water Needed

Works With Any Tip

Cleans better than conventional sponges

No water required

Will not reduce the tip temperature

Cleans better than conventional sponges

No water required

Will not reduce the tip temperature

Best Soldering Iron Tip Cleaner and Base Holder.

No Water Required, Not Reduce The Tip Temperature.

Made From Brass Wire, Cleans Better Than Conventional Sponges.

12 grams each / 10 per pack

Used for cleaning soldering tips

Material Composition: 100% brass

SET OF 4: 20 cleaning needles + 10 nylon brushes + 26 cleaning wires. Brush diameters: 2mm, 3mm, 4mm, 5mm, 7 mm. Wire sizes diameters: 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5mm.

CLEANING NEEDLES AND BRUSHES: Perfect for clearing out blockages or obstructions in the narrow passage of auto motorcycle carburetor. Comes with a detachable key ring for convenient hanging and storage.

MATERIAL: Made of high density Nylon brushes and stainless steel material, it's rust-proof, non-deforming with good elasticity and no hair loss, Spiral bristles, great access to the inner side, making the washing clearly and thoroughly.

Needle brush material: made of 304 stainless steel flexible handle, no deformation, with nylon and spiral bristles, easy to clean; Detachable key ring, easy to hang and store

Size: the diameter of stainless steel needle cleaning tools are 1.1 mm, 1.4 mm, 1.6 mm, 1.8 mm and 2.1 mm; The diameter of stainless steel nylon brush includes 2 mm, 3 mm, 4 mm, 5 mm and 7 mm, and all of their overall lengths are 11 cm, including brush size of 3 cm; The size of oil cleaner box is about 10.2 x 2.3 x 1.2 cm

Function: this motorcycle carburetor cleaning tool kit is designed to clean dirt from small jets and carbohydrate channels to help your motorcycle run well; Spiral bristles are designed to make it easy to get inside and clean thoroughly

What you will get: 2 pieces 5 inches (130 mm) and 2 pieces 3 inches (75 mm) tip cleaners; Each welding tip cleaner includes 13 wire files in different lengths, which can meet your different need; All includes a flat file

Quality material: the torch tip cleaner tool is made of quality stainless steel and comes with a lightweight, compact aluminum carrying case, a practical tool are easy to carry and use,13 pieces wires set with spiral knurling for cleaning common size jets and carb body holes passages

Different diameters and lengths: the carburetor cleaning kit comes with 13 different diameters, especially designed to clean out the tiny jets and carb passages from dirt; The wire sizes are 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6 mm; The length of small set is 2.6 inches (66 mm) and big set is 4.5 inches (112 mm)

✅A must have kit for solder tip cleaner: this MEKNIC soldering tip brass cleaner cleans much better than conventional sponges, it’s no need water, will not reduce the tip temperature when clean tips, also no solder ball breaks out than conventional tip tins, improve work efficiency.

✅The soldering iron tip cleaner can prevent the iron tips oxidation effectively, to prolong the life of your tip, they help to remove oxides and excess solder to preserve tip life and enable clean precise soldering. Soldering tip cleaner wire uses high quality brass material, It is smokeless, tasteless, non-toxic, Soft coiled brass tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life.

✅Extra 6pcs replacement brass pads: brass tip cleaning ball can improve your soldering capabilities and it’s way better than paper, sponge or steel wool. No contamination risk compared to conventional tip tinners with this MEKNIC soldering iron cleaner.

Cleans better than conventional sponges

BEST QUALITY - Each piece Cleaning wire sponge 26 grams, total 130 grams lot.

EASY TO USE - No water required, cleaning your soldering iron tips.

PROFESSIONAL TECHNOLOGY - Soldering clean wire ball Will not reduce the tip temperature.

What you receive: this hand drill bits set includes 1 piece of pin vise hand drill, 46 pieces of micro twist drill bits and 10 pieces of PCB mini drill bits, total 57 pieces for your craft carving DIY work

Pin vise hand drill: made of aluminum alloy, this pin vise hand drill is durable and firm, adopting 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp, its tail can be rotated, sturdy and convenient for you to operate

PCB mini drills: PCB mini drills are made of tungsten carbide, the shank diameter is approx. 3.175 mm, overall length is approx. 38 mm, which fit for processing PCB, normal FR-4, CEM-3 boards, SMT, CNC, molds, plastic, circuit board, carbon fiber, composite board and so on

Lead free (RoHS Compliant)

Removes tip oxidation

No-Clean compatible formulation

Make Your Work More Easy - Are you annoyed that some tight spaces cannot be cleaned up? Congratulations on finding the one you want. 5 different width Nylon Brushes + 10 different diameter Cleaning Needles + 13 different diameter Cleaning Wires can help you clean out the blockages that you can't see. You do not need to dirty your beautiful hands. This set of tools can easily help you clean up the corners that bother you.

Small & Sturdy- Did you ever buy the set which didn’t work with your job? You worked with small engines and these didn’t even clean a motorcycle carburetor. Too big！ The tubes brushes fit small jets and passages and nice for heavily crusted deposits like you commonly see.

Material- Made of high density Nylon brushes and stainless steel material, it's rust-proof, non-deforming with good elasticity and no hair loss, Spiral bristles, great access to the inner side, making the washing clearly and thoroughly. The obstructions in those crooked corners are easily cleaned.

Smokeless, Tasteless, Non-Toxic, No pollution.

No water required.

No contamination risk compared to conventional tip tinners

★Kaisiking soldering tip cleaner cleans better than conventional, it is no need to use water to keep the soldering tips clean, so that will not reduce the tip's temperature, improve your working efficiency

★Soldering tip cleaner wire uses high quality brass material, It is smokeless, tasteless, non-toxic, Soft coiled brass tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life

★This solder wire holder enables to hold the iron tip and keep it last longer, when you plug the soldering iron on tip cleaner, the tip will be cleaned thoroughly, there won't have tin residual outside the container

【Excellent Product Performance】 Soldering tip cleaner cleans better than conventional sponges. It doesn’t need water so that will not reduce the tip’s temperature. There is no contamination risk compared to conventional tip tinners. It avoids premature wastage of soldering iron tips. And it greatly reduces the rate of oxide accumulation in soldering iron tips compared to conventional tip cleaners.

【High Quality】 Soldering tip cleaner wire uses high quality brass material, It is smokeless, tasteless, non-toxic, Soft coiled brass tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life.

【Save Time】 Water on a sponge drops the tip temperature quickly and depending on how fast your equipment can recover you may save down time with the soldering iron tip cleaner. Use Solder Tip cleaning wire will improve your work efficiency.

MMOBIEL Soldering Tip Iron Cleaner, Solder Tip Cleaning Wire and Metal Brass Holder Station.

High Quality: MMOBIEL Soldering Tip Iron Cleaner, Solder Tip Cleaning Wire and Metal Brass Holder Station for cleaning Soldering Tips with out Water so will not reduce the Tip’s Temperature.

Uses high quality Brass material, It is smokeless, tasteless, non-toxic, Soft coiled brass tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life.

Rubber pad Anti-slip design we upgraded our tip cleaner with rubber pad, you do not need to hold it down with your hand when poking my iron into its innards. More convenient to you

No water is added to prevent the soldering iron tip from cooling down, no solder balls break out, and welding efficiency is improved

With the non-slip construction, we have added a silicone cushion to each packaging, which can effectively prevent slipping without being fixed

➤ A sturdy, heavy-duty stand with a more stable base than similar products;

➤ 100% insulated metal material, just-used soldering iron can also be placed safely ;

➤ Replaceable Soft Coiled Brass Tip Cleaner for longer soldering tip life;

Nice performance: the soldering iron cleaners don't need cleaning with water, so that will not lower the temperature of the tips; With a dense structure, the brass tip cleaner provides a multi-pointed touch surface for deep cleaning

Quality material: the ball shell base is made of alloy material, durable and safe to withstand working in the heat; Soldering tip cleaning wire ball is made of quality brass, can reduce oxide accumulation, improve work efficiency and prolong the service life of your soldering iron tip

Considerate design: the cleaner holder is designed in the shape of a ball shell to collect the waste of the solder tip; When you clean the solder tip, the dome shell can effectively prevent the tin residues from falling out of the container, which can keep your workbench clean

【Soldering iron tip cleaner 】-Better cleaning effect than traditional sponges. No water is needed, and the temperature of the soldering iron tip will not be lowered when cleaning the soldering iron tip, also no solder ball breaks out than conventional tip tins, which improves work efficiency.

【Material】 The solder iron cleaner with hemispherical design is made of stainless steel, which is sturdy and durable. The soldering iron tip cleaning wire ball is made of brass, which helps to remove oxides and excess solder and prolong the service life of the soldering iron tip.

【Solder Rosin Wire Core Tin】WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Stainless Steel And High Density Nylon, Good Elasticity, No Hair Loss

Wires Set 4 Inch : 2x Come With 13 Different Diameters Comes With A Lightweight, Compact Aluminum Carrying Case

Brush Set 4.1 Inch :18x Cleaning Needles 12x Cleaning Brushes 2x Wrench

Include: 1pc red 3" Standard tip cleaner and 1pc blue 5" King tip cleaner.

Each welding tip cleaner includes 13 Wire Files (49 to 77) at different lengths (2-1/3" or 4-1/3") and an extra flat file.

Tip cleaner is made of Stainless Steel, perfect for cleaning gas orifices and removing debris from tips and small holes.

1.High-quality materials: The carbohydrate cleaning tool is made of high-quality stainless steel, and is equipped with a lightweight and stable high-quality aluminum box, it is a good tool to carry and use.

2.Different diameters: There are 13 kinds of carburetor cleaning kits (0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.4, 1.5, 1.6mm, a flat file) with different diameters, specially used to remove tiny Dirt in the nozzle and carburetor channels.

3.Widely used: Welding gun nozzle cleaning tool can be used to clean small orifices such as spray guns, nozzles, pneumatic tools, camping stoves and so on; it is also suitable for most automobiles, motorcycles, ATV, welding machines, tattoo machines, lawn equipment and other power sports carburettor .