Best Huepar in 2026

⭐【Fully Layout with 3 x 360° Line Lasers】: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

⭐【Dual Power Methods & Type-C Charging Port】: Huepar B03CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.

⭐【Brighter Green Laser & Outdoor Pulse Mode】: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 200 feet with Huepar Line Laser Detector.

✔️FULLY LAYOUT WITH 3 X 360 LINE LASERS: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. Two vertical lines cross at 90° angles makes user quickly visualize and finish square layout. This 360 laser level is a complete level tool as well as an alignment laser tool aids in full room layout.

✔️TRIPLE POWER TECHNOLOGY: Huepar laser tool employed the included large capacity lithium battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. In addition, this laser tool can be used at job site with direct input charging even if taking out the battery. Charging protection prevents the tool from overcharge. 4 battery indicators on keypad allow users to know the current battery volume anytime.

✔️MULTIFUNCTIONAL LASER TOOL: The one 360° horizontal and two 360° vertical laser lines can be selected individually depends on job site applications. With our smart pendulum system, this line laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

🌞FULL LAYOUT WITH 3 x 360 LINE LASER: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. Two vertical lines cross at 90° angles makes user quickly visualize and square the layout. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

🌞DUAL POWER METHODS&USB CHARGING PORT: Huepar GF360G Laser Level employed a large capacity of 3.7V / 5200mAh Li-ion Battery and provides long running time. The Li-ion Battery can be recharged in the battery charger (included in the package) separately as well as in the laser tool. When taking out the battery, the cross line laser level can be used at the job site by plugged in directly. The power indicator on the charger and keypad allow users to know the charging status.

🌞BRIGHTER GREEN LASER&OUTDOOR PULSE MODE: This self-leveling laser level adopted the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. Under same light condition, the green beam is twice bright as the red laser with a working range up to 130 feet(100LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode helps extend the laser range up to 200ft with Huepar Line Laser Receiver LR-6RG/LR-5RG in bright-light or outdoor conditions.

🌞【3D Laser Level and Pulse Mode】The Huepar green laser level can cover all around the room because it has one 360° horizontal and also two 360° vertical lines. You can easily choose to turn on/off any laser line as each button corresponds to a single laser line. The green beam is 4x bright as the red laser, with working range up to 98 feet (100LUX) of accuracy within ±1/9" at 33 Feet. The outdoor pulse mode extends the laser range up to 200 feet with Huepar Line Laser Detector.

🌞【Two Operation Modes】This 3D laser level has self-leveling mode and manual mode. For the self-leveling mode: unlock the pendulum and the laser level will self-level within 3°, otherwise the laser will keep flashing. Lock the pendulum, to switch to the manual mode and meet your alignment needs from different angles.

🌞【Large Battery Capacity and Type-C Charging Port】The built-in 3.7V 4000mAh Li-ion battery offers you 8 hours of continuous working time, so it’s not necessary to charge the batteries frequently. The 4 battery indicators show you the current battery status and the charging protection prevents overcharging. This laser tool can also be charged by laptop, power bank, car charger, etc, because it has type-C charging port.

🌞3 X 360 WITH FLOOR LINE LASER: This laser tool offers one 360° horizontal floor laser line for tiling installation at a 2/5" distance. With the lifting base, the 360° floor laser can raise from the surface to go over and travel past uneven surfaces or obstructions between 1" and 3.15" height. Two vertical lines cross at 90°angles makes user quickly visualize and finish square layout. This 360 laser level is a complete tool for covering the floor, wall, ceiling all around the room.

🌞MULTIFUNCTIONAL LASER TOOL: The remote control enables to select three 360° laser lines individually at a distance up to 33Ft. With smart pendulum, this laser tool self levels and indicates out-of-level while pendulum unlocked. The laser tool beeps when out of self-leveling range ±4°. Once pendulum locked, it switches to manual mode to lock lines at any angle. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver LR-6RG/LR-5RG. The laser adopts bright Osram’s green laser unit.

🌞DUAL POWER METHODS&TYPE-C PORT: Huepar laser tool employed large capacity lithium battery (can be purchased easily at local market) for 6 hours use with all beams on. An extra battery is included for backup. Besides, this laser tool can be used at job site by plugged in when take out the battery. With Type-C charging port, the laser level can also be charged by phone, laptop, power bank, car charger, etc. Users can charge the battery independently with the battery charger included.

🌞HIGH ACCURACY&3 x 360 LINE LASERS: Huepar laser tool adopts ultra bright green beam with ± 1/13 inch at 33Ft high accuracy. One 360° horizontal and two 360° vertical laser lines enable users to cover the floor, wall, ceiling all around the room. Two vertical lines cross at 90°angles makes user quickly visualize and finish square layout. This 360 laser level is a great tool for various leveling and layout applications.

🌞DUAL POWER METHODS&TYPE-C PORT: Huepar laser tool employed large capacity lithium battery (can be purchased easily at local market) for 6 hours use with all beams on. An extra battery is included for backup. Besides, this laser tool can be used at job site by plugged in when take out the battery. With Type-C charging port, the laser level can also be charged by phone, laptop, power bank, car charger, etc. Users can charge the battery independently with the battery charger included.

🌞MULTIFUNCTIONAL LASER TOOL: 360° horizontal & two 360° vertical laser lines can be selected by separate H and V button. With smart pendulum system, this laser tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines at any angle. The pulse mode extends laser range up to 200Ft. with Huepar Line Laser Receiver LR-6RG/LR-5RG in bright light or outdoor conditions. The laser adopts bright Osram’s green laser unit.

⭐HIGH ACCURACY&CROSS-LINE LASER:This laser tool adopts ultra bright green beam with ± 1/13 inch at 33Ft high accuracy. It projects one 130° Horizontal and one 150° Vertical line for a wide array of leveling and alignment applications. This laser too is ideal for paving tiles, installing photo, door, window, or furniture carpentry, hanging wallpaper, etc.

⭐MULTIFUNCTIONAL LASER TOOL:Users canselect Cross lines, Horizontal or Vertical line by one button operation. With smart pendulum system, this laser tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for alignment at any angle. Pulse mode extends the working range up to 150Ft with Huepar laser receiver in bright light or outdoor conditions.

⭐LONGER WORKING TIME: Huepar laser tool employed 4 AA alkaline batteries for longer working time. The laser tool will work for 5 hours while all laser beams on with totally new batteries. It is recommended to replace with large-capacity rechargeable batteries or alkaline battery above 1500mAh for each.

✔️360° HORIZONTAL LINE AND TWO PLUMB DOTS: With one ultra-bright 360° horizontal & one 140° vertical green beams, 621CG Laser Level provides all-around leveling coverage even in big job-site. And unique up and down plumb spots provide additional benefits of ceiling, points transfer, leveling, alignment, plumbing and squaring applications to suit users' needs.

✔️MULTIFUNCTIONAL LASER TOOL: The line laser level offers all-in-one versatility for users who perform a variety of tasks involving squaring, plumbing and leveling. The 360°Horizontal Line, 140°Vertical Line, Red Plumb points can be selected independently by the laser button on the key pad. This laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

✔️BRIGHT GREEN BEAM & OUTDOOR PULSE MODE: This green laser tool adopted brighter green laser than standard red beams with accuracy of +/- 1/9" at 33Ft for lines, 1/9" at 33Ft for dots. Besides brighter green beam, the outdoor pulse mode extends laser range up to 180ft with Huepar LR-6RG/LR-5RG Line Laser Receiver in bright light or outdoor conditions.

✔️BLUETOOTH TECHNOLOGY: With Bluetooth connectivity, users can control the setup of the laser from across the room with smart phone and Huepar App. Huepar App is free to download and use, the App can switch ON/OFF the laser lines and pulse mode, select the laser planes, adjust the line visibility and provide out-of-level alarm.

✔️MULTIFUNCTIONAL 3x360 LASER TOOL: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depending on job site applications. With our smart pendulum system, this laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

✔️TRIPLE POWER TECHNOLOGY: This 360 laser tool employed the included large capacity lithium battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. In addition, this laser tool can be used at job site with direct input charging when taking out the battery. Charging protection helps prevent the tool from overcharge. 4 battery indicators on keypad allow users to know the current battery volume anytime.

⭐360-DEGREE VERTICAL and 360-DEGREE HORIZONTAL LINE- With its ultra bright 360-degree vertical and 360-degree horizontal green beams the 902CG Laser Level provides all-around leveling coverage with accuracy of ±1/9 Inch at 33 Feet and a maximum working range of 130 feet, enabling you to work in different parts of a large room simultaneously.

⭐GREEN LASER UNIT- This self-leveling cross line laser level adopt the bright Osram’s green laser unit, it is at least twice brighter than red lasers utilizing the same power source. The bright 360° laser lines allows the user to project a laser reference line around the room with accuracy to quickly establish level, enabling users to work in different parts of a room simultaneously.

⭐MULTIFUNCTIONAL MODE- One button operation makes it easy to project lines together or independently (cross line, vertical and 360-degree horizontal). With our smart pendulum system, the pendulum locks when the level is switched off. Simply, hold the top button 2 seconds to start manual mode, letting you project lines in any position or angle.

【360 Degree Horizontal Line and Two Plumb Dots】With one ultra-bright 360° horizontal line and one 140° vertical green beam, 7211CG Laser Level provides all-around leveling coverage even in big job-site. The unique green up and down plumb spots provide additional benefits of ceiling, points transfer, leveling, alignment, plumbing and squaring applications to suit users' needs.

【Li-ion Battery with Type-C Charging Port】Huepar 7211CG line laser tool employed a large capacity of 7.4V / 1500mAh Li-ion Battery and provides up to 10 hours of running time. The Li-ion battery comes with a Type-C charging port that can be charged separately. And the Li-ion battery can also be charged by laptop, power bank, car charger, etc.

【Outdoor Pulse Mode & Visibility Adjustment】This self-leveling laser level has brighter green laser than red beams with accuracy of ± 1/9" at 33Ft for lines, 1/9" at 33Ft for the two green dots. Besides brighter green beam, outdoor pulse mode extends the laser range up to 197ft with Huepar LR-6RG/LR-5RG Line Laser Receiver in bright light or outdoor conditions. Three brightness levels of visibility adjustment function enables users to select the line brightness in different light conditions.

⭐PROFESSIONAL ACCURACY: ± 2mm at 10m(± 1/13 In. at 33 Ft), bright Class II laser 635nm wavelength, protected by whole TPR soft rubber design, makes Huepar laser level shock resistant, wear resistant and impact resistant.

⭐VERTICAL BEAM SPREAD COVERS 150°+: An expansion angle of 150°+ easily projects a vertical line from the floor to the ceiling. The Portable Size makes it easy to carry and pack.

⭐H&V SWITCHABLE: One button operation makes it easy to select Crossed lines, Horizontal or Vertical line. 4*AA alkaline batteries power this level for up to 12 hours of continuous use with both red beams on.

✔️FULLY LAYOUT WITH 3 X 360 LINE LASERS: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three 360° laser lines can be selected individually depends on job site applications. With smart pendulum system, this laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

✔️TRIPLE POWER TECHNOLOGY: Huepar laser tool employed the included large capacity lithium battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. In addition, this laser tool can be used at job site with direct input charging even if take out the battery. Charging protection help prevent the tool from overcharge. 4 battery indicators on keypad allow users to know the current battery volume anytime.

✔️POWER-SAVING OUTDOOR PULSE MODE: This laser level adopted green laser beam which is 4 times brighter than standard red beams with a working range up to 130Ft with an accuracy of +/- 1/9" at 33Ft. Besides highly visible green beam, a power-saving pulse mode extends laser range up to 200Ft with Huepar LR-6RG/LR-5RG Line Laser Receiver in bright light or outdoor conditions and continuous working time.

【360 Degree Horizontal Line and Two Plumb Dots】With one ultra-bright 360° horizontal line and one 140° vertical green beam, 6211CG Laser Level provides all-around leveling coverage even in big job-site. The unique up and down plumb spots provide additional benefits of ceiling, points transfer, leveling, alignment, plumbing and squaring applications to suit users' needs.

【Li-ion Battery with Type-C Charging Port】Huepar 6211CG line laser tool employed a large capacity of 7.4V / 1500mAh Li-ion Battery and provides up to 10 hours of running time. The Li-ion battery comes with a Type-C charging port that can be charged separately. And the Li-ion battery can also be charged by laptop, power bank, car charger, etc.

【Brighter Green Beam & Outdoor Pulse Mode】This self-leveling laser level adopted brighter green laser than standard red beams with accuracy of +/- 1/9" at 33Ft for lines, 1/9" at 33Ft for dots. Besides brighter green beam, an outdoor pulse mode extends the laser range up to 197ft with Huepar LR-6RG/LR-5RG Line Laser Receiver in bright light or outdoor conditions.

🔹 COMBINES PLUMB AND UP POINTS WITH CROSS LINE- Huepar M-9211G self-Leveling laser level offers two points plus a cross-line for a two-in-one laser. This hybrid point and line laser tool combines all the features of the Huepar line laser plus point-to-point plumb, giving contractors in the commercial and remodeling trades maximum versatility.

🔹 FINE POSITIONING- This laser level offers cross-line accuracy of +/- 1/9 inch at 33 feet, up point accuracy of 1/13 inch at 33 feet and down point accuracy of 1/9 inch at 33 feet. Class II 510-530nm laser product. We adopt the latest LD blue-green laser unit, It is at least twice brighter than red lasers utilizing the same power source.

🔹 SELF-LEVELING- The M-9211G cross-line laser features the Smart Pendulum System, you are able to self-level on an inclined surface within 4 degrees. If the surface inclines over 4 degrees, the laser will flash to indicate you are out-of-leveling parameters. You can be confident that you are within optimal leveling range. Secure transport lock protects pendulum when unit is switched off. Manual mode locks lines for use at any angle.

⭐NEW GREEN DIODE TECHNOLOGY - We adopt advanced technology, which is the best green laser unit in the word at present; Green laser is 2 times brighter than red laser with the same light source. When in the cloudy and light intensity is 14000lux environment, but outdoor use is not recommended.

⭐COMPACT AND HANDY - With its soft-grip, light weight and PALM-SIZED design, the M-9011G is the most handy and professional laser tool you can think of to carry out work for all trades from drop ceiling installation, lighting fixtures, photo frames aligning and wall tiling down to floor tiling etc. A real dream home improvement tool comes in handy.

⭐FINE POSITIONING - Projects a laser cross with an accuracy of 1/9 of an inch at 33 feet and full brightness for optimal visibility; Self-leveling time less than 3 seconds; 1/4 -20 thread mounts allows you to use it with a tripod (not included) and adjust its height easily to make measuring flexible and stable.

✔️HUEPAR DEDICATED RECEIVER- Huepar LR-6RG receiver can ONLY be used with Huepar Line Laser Levels that feature Pulse Mode Function. Please pay attention to that this receiver can NOT be used with Rotary Laser Level. And the receiver can NOT be used with Huepr 9011G&9211G laser level. It is recommended to use in accompany with Huepar 902CG/901CG/8211G/BOX-1G/BOX-1R/GF360G/HM03CG/S03CG/S04CG/S03DG/LS04CG/LS03CG/LS41G/GF360R/622CG/622CR/621CG/621CR/603CG/603CR/602CG/602CR/DT03 Laser Level, etc.

✔️AVAILABLE FOR RED AND GREEN PULSE LASER- It is necessary to Turn ON the Pulse Mode of the laser level when using with Huepar LR-6RG laser receiver. This receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 200ft (60m).

✔️CLEAR MULTI-SIDED READOUTS- Ergonomic design with display on the front, side and back of receiver, offers easier visual readout. This unit is outfitted with a dual-sided Bubble Vial on both the front and top, in order to more accurately determine the level.

⭐【1H / 2V Multi-line Laser for Wide Application】: The laser level B21CG projects 360° horizontal line and two 120° vertical lines cover the floor, wall, ceiling around the room. The individual and combined laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

⭐【Dual Power Methods & Type-C Charging Port】: Huepar B21CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.

⭐【Brighter Green Laser & Outdoor Pulse Mode】: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 200 feet with Huepar Line Laser Detector.

🍀FULLY LAYOUT WITH 3 X 360° LINE LASERS: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room, provides an all-in-one level and alignment solution for one-person job setup. Three laser lines cross at 90°angles makes user quickly visualize and finish square layout. The laser tool quickly arranges and squares room layout with three 360° laser lines.

🍀TRIPLE POWER TECHNOLOGY: Huepar laser tool employed the included 7.4V / 2600mAh large capacity Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. In addition, this laser tool can be used at job site with direct input charging even if taking out the battery. Charging protection prevents the tool from overcharge.

🍀MULTIFUNCTIONAL LASER TOOL: The one 360° horizontal and two 360° vertical laser lines can be selected individually by separate H and V button on the keypad. With our smart pendulum system, this line laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

🍀4 X 360° WITH TOP & FLOOR LINE LASER: This laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. With the lifting base, the 360° floor laser can raise from the surface to project over and travel past uneven surfaces or obstructions between 1" and 3.54" height. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout.

🍀TRIPLE POWER METHODS&TYPE-C CHARGING PORT: This 360 laser tool adopted large capacity Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc.

🍀MULTIFUNCTIONAL LASER TOOL: The four 360° laser planes can be selected individually by separate H and V button on the keypad. With smart pendulum, the laser tool self levels and indicates out-of-level condition while pendulum unlocked. The line laser will beep when out of self-leveling range ±3.5°. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver LR-6RG/LR-5RG.

✔️TWO MEASURING MODES & HIGH ACCURACY: Huepar digital angle finder comes with two measuring modes -Single Axis Mode and Dual Axis Bubble Mode, enabling the protractor to measure in five directions. Electronic bubble vial on display offers as indication when measuring for easier leveling work. The angle gauge features high accuracy of 0.1°at 0° ~90° , ±0.2° at other angles with resolution 0.01°. It delivers a wide measuring range of 4*90°(0~360°) in single axis, -40°~40°in dual axis.

✔️FIVE UNITS&BACKLIT LCD & AUTIBLE ALERT: Five selections of measuring units, degree(°)，percentage(%), mm/m, in/ft(in Fraction), in/ft(in Decimal), which can meet various working demands. Large LCD display with backlit provides accurate, quick and clear readings even in dark environment. After turning on the buzzer prompt function, you can set the alarm angle and range for easier working.

✔️MAGNETIC V-GROOVE BASE & SELF-INVERTING DISPLAY: With powerful magnetic V-groove bases at top and the bottom, this digital bevel gauge can be easily and firmly attached to miter saw, band saw, table saw blades, metal poles and even round pipes. You can also use it on fences, tables, and other metal surfaces. Self-inverting display allows for easy slope readings when angle measurement tool is upside down.

⭐【Positioning Device for Line Lasers】: The bracket with 1/4"-20 male thread, the maximum depth from the 1/4''-20 thread to the back of the bracket is 8.5cm. It is compatible with most cross line laser levels with 1/4" female thread. If your laser level has a 5/8" female thread, please purchase the conversion screw adapter AD5/8 separately.

⭐【Multi-functional Auxiliary Back Clip】: A separate back clip included in the kit is compatible with most magnetic bases on the market, increasing the adsorption force of the magnets and stability. The Back Clip offers the ability to mount to any object up to 5cm thick. The vertical angle against the wall can be adjusted by the fine-tuning knobs as well as the opening size of the clip. A nail hole in the clip enables to be fixed firmly on the wall.

⭐【Multi-directional Fine-tuning Bracket】: There are four fine adjustment knobs on the bracket, help to adjust the left and right position within 3cm, the front and back position within 5.5cm, the height within 9 cm, and the horizontal rotation 360°. An added locking knob enables to fix the working height and avoid sliding up and down. The graduations are marked in inches and centimeters for easy readouts.

🌞4x360° LINE LASERS&PULSE MODE(RECEIVER INCLUDED): This laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver included in the kit. The laser uses bright Osram’s green laser unit that has higher stability.

🌞LCD DISPLAY&BLUETOOTH TECH: The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously.

🌞TRIPLE POWER METHODS & TYPE-C CHARGING PORT: This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc.

【High-Performance Laser】Exterior working range can be up to 700M in diameter with a detector, accuracy of +/- 1/8" at 100Ft. The red beam has strong stability, low power consumption, and high-cost performance. The red beam is more suitable for indoor use. The scanning speed can be adjusted at 0→300→600rpm, and the angle of scanning will continuously change as follows:0°→10°-→45°-→90°→180°-→0°.

【Automatic Alignment】 Electronic Horizontal self-leveling makes this rotary laser self-level up to 5° within 15s. If the RL300HR gets disturbed on the job it relevels itself automatically. The self-leveling motors are accurate to ±10 arc seconds. Slight movements can be ignored in windy or other vibrating conditions while turning on vibrate mode. In vibrate mode, the self-leveling function is deactivated and the cross is locked to use the device at any angle.

【Dual Slope Function】Electronic dual-slope function allows the user to perform a slope of 5 degrees in both X and Y axis. The slope of the Y-axis and the Slope of both X&Y-axis can be set by the remote control. This dual-slope mode works perfectly when checking grade, setting drainage, landscaping-terracing, or other slope work. This is a great laser tool for any job from DIY to large commercial construction, and everything in between.

✔️BUILT-IN LI-ION BATTERY & ELECTRIC ANGULAR SENSOR: Powered by a large-capacity Li-ion battery, Huepar laser measure offers remarkable runtime for all-day jobs and can work up to 8000 times when fully charged. There is no need to replace the battery frequently making your work more efficiently. Equipped with electronic angular sensor, laser distance meter delivers higher accuracy and faster angle measurements compared to bubble level meters.

✔️MULTIPLE MEASUREMENT MODES: This laser distance measure delivers angle, area, distance, volume, Pythagorean measurement modes. Featuring continuous measurement, addition and subtraction, calibration, automatic calculation of area and &volume and 30 groups data memory function, it is ideal for home and construction or industries applications.

✔️HIGH ACCURACY & UNIT SWITCHABLE: Huepar distance measure features long-range measuring with extreme accuracy and can measures distances up to 393-feet within 1/16-inch. The tool can measure from front/middle/rear reference points making it easy to measure in different scenarios. All measurements are displayed in real time and can be switchable among M/In/Ft freely.

24 Months Warranty & Lifetime Customer Support：Huepar is committed to providing Best-in-Class service to our customers- 24/7 Service Team（response in 24hrs & solution in 48hrs）; Worldwide Maintenance Center( your product can be repaired or replaced faster ). This laser level adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.

4 X 360°LASER LINES&REMOTE CONTROL:This laser tool projects 4D laser lines. The 360° horizontal floor laser line is for tiling installation at a 3/5" distance. The top 360° horizontal line can be used for ceiling installation. The 16 laser lines cross at 90°that can cover the floor, walls and ceiling all around the room. With the remote control, the four 360 laser planes can be selected individually at a distance up to 100Ft. Don't worry about touching the laser tool by mistake during leveling.

LONG WORKING TIME & TYPE-C CHARGING PORT: Huepar 904DG Laser Level employed a large capacity of 3.7V / 5200mAh Li-ion Battery and provides up to 6-12 hours of running time. The Li-ion Battery comes with a Type-C charging port that can be charged separately. When taking out the battery, this 4D laser level can be used at the job site by plugged in directly. The 16 lines laser level can also be charged by laptop, power bank, car charger, etc.

Huepar is committed to providing Best-in-Class service to our customers- 24/7 Service Team（response in 24hrs & solution in 48hrs）; Lifetime Customer Support(hassle-free of exceeding the warranty); Worldwide Maintenance Center( your product can be repaired or replaced faster ). This laser level adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.

TWO LI-ION BATTERIES & TYPE-C CHARGING: This laser level comes with 2 5200mAh Li-ion batteries for convenient replacement and continuous use. When the battery is exhausted, you can directly plug in the charger and the laser level can be used normally. 4 battery indicators on the Li-ion battery allow users to know the current battery level and charging status. With Type-C charging port, the batteries can also be charged by phone, laptop, power bank, car charger, etc.

OUTDOOR PULSE MODE: This laser level projects green laser beam which is 4 times brighter than standard red beams with a working range up to 30m/98Ft of an accuracy +/- 3mm/10m/(+/- 1/9" at 33Ft). Besides highly visible green beam, an outdoor pulse mode extends laser working range up to 60m/197Ft with Huepar LR-5RG/LR-6RG Line Laser Receiver in bright light or outdoor conditions .

【4 x 360° with Top & Floor Line Laser】his laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. With the lifting base, the 360° floor laser can raise from the surface to go over and travel past uneven surfaces or obstructions between 1" and 3.54" height. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout.

【LCD Display & Bluetooth Tech】The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously.

【Triple Power Methods & Type-C Charging Port】This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc.

✔️360-DEGREE HORIZONTAL LINE AND TWO PLUMB DOTS: With one ultra-bright 360° horizontal & one 140° vertical red beams, 621CR Laser Level provides all-around leveling coverage even in big job-site. And unique up and down plumb spots provide additional benefits of ceiling, points transfer, leveling, alignment, plumbing and squaring applications to suit users’ needs.

✔️ALL-IN-ONE LASER: 621CR laser level offers all-in-one versatility for users who perform a variety of tasks involving squaring, plumbing and leveling. Five modes are freely selectable independently, including Horizontal mode, Vertical mode, Horizontal&Vertical mode, Plumb points mode, and all beams on mode.

✔️POWER-SAVING OUTDOOR PULSE MODE: This laser level adopted bright red beam with accuracy of +/- 1/9" at 33Ft for lines, 1/9" at 33Ft for dots. In addition, a power-saving outdoor pulse mode extends laser range up to 150Ft with Huepar LR-6RG/LR-5RG Line Laser Receiver in bright light or outdoor conditions and use for a longer time.

✔️FULL LAYOUT WITH 3 x 360 LINE LASER: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. Two vertical lines cross at 90° angles makes user quickly visualize and square the layout. For three planes, flat surface laser windows can offers lasers closing to the wall at a minimum 10mm distance which makes it easier and more precise for users to do any paneling jobs.

✔️MULTIFUNCTIONAL LASER TOOL: The horizontal and two vertical 360° laser lines can be switched individually that you can choose whatever you want to work with vertical, horizontal or both laser lines simultaneously. With our smart pendulum system, this laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

✔️OUTDOOR PULSE MODE: This laser level adopted bright red beam with a working range up to 100Ft with +/- 1/9" at 33Ft accuracy. In addition, an outdoor pulse mode extends the laser range up to 165Ft with Huepar Line Laser Receiver LR-6RG/LR-5RG in bright-light or outdoor conditions. GF360R laser level makes job easier in brighter and larger space working conditions.