Best Huepar Layout Tools in 2026

⭐【Fully Layout with 3 x 360° Line Lasers】: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

⭐【Dual Power Methods & Type-C Charging Port】: Huepar B03CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.

⭐【Brighter Green Laser & Outdoor Pulse Mode】: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 200 feet with Huepar Line Laser Detector.

🌞【3D Laser Level and Pulse Mode】The Huepar green laser level can cover all around the room because it has one 360° horizontal and also two 360° vertical lines. You can easily choose to turn on/off any laser line as each button corresponds to a single laser line. The green beam is 4x bright as the red laser, with working range up to 98 feet (100LUX) of accuracy within ±1/9" at 33 Feet. The outdoor pulse mode extends the laser range up to 200 feet with Huepar Line Laser Detector.

🌞【Two Operation Modes】This 3D laser level has self-leveling mode and manual mode. For the self-leveling mode: unlock the pendulum and the laser level will self-level within 3°, otherwise the laser will keep flashing. Lock the pendulum, to switch to the manual mode and meet your alignment needs from different angles.

🌞【Large Battery Capacity and Type-C Charging Port】The built-in 3.7V 4000mAh Li-ion battery offers you 8 hours of continuous working time, so it’s not necessary to charge the batteries frequently. The 4 battery indicators show you the current battery status and the charging protection prevents overcharging. This laser tool can also be charged by laptop, power bank, car charger, etc, because it has type-C charging port.

⭐HIGH ACCURACY&CROSS-LINE LASER:This laser tool adopts ultra bright green beam with ± 1/13 inch at 33Ft high accuracy. It projects one 130° Horizontal and one 150° Vertical line for a wide array of leveling and alignment applications. This laser too is ideal for paving tiles, installing photo, door, window, or furniture carpentry, hanging wallpaper, etc.

⭐MULTIFUNCTIONAL LASER TOOL:Users canselect Cross lines, Horizontal or Vertical line by one button operation. With smart pendulum system, this laser tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for alignment at any angle. Pulse mode extends the working range up to 150Ft with Huepar laser receiver in bright light or outdoor conditions.

⭐LONGER WORKING TIME: Huepar laser tool employed 4 AA alkaline batteries for longer working time. The laser tool will work for 5 hours while all laser beams on with totally new batteries. It is recommended to replace with large-capacity rechargeable batteries or alkaline battery above 1500mAh for each.

✔️360° HORIZONTAL LINE AND TWO PLUMB DOTS: With one ultra-bright 360° horizontal & one 140° vertical green beams, 621CG Laser Level provides all-around leveling coverage even in big job-site. And unique up and down plumb spots provide additional benefits of ceiling, points transfer, leveling, alignment, plumbing and squaring applications to suit users' needs.

✔️MULTIFUNCTIONAL LASER TOOL: The line laser level offers all-in-one versatility for users who perform a variety of tasks involving squaring, plumbing and leveling. The 360°Horizontal Line, 140°Vertical Line, Red Plumb points can be selected independently by the laser button on the key pad. This laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

✔️BRIGHT GREEN BEAM & OUTDOOR PULSE MODE: This green laser tool adopted brighter green laser than standard red beams with accuracy of +/- 1/9" at 33Ft for lines, 1/9" at 33Ft for dots. Besides brighter green beam, the outdoor pulse mode extends laser range up to 180ft with Huepar LR-6RG/LR-5RG Line Laser Receiver in bright light or outdoor conditions.

✔️BLUETOOTH TECHNOLOGY: With Bluetooth connectivity, users can control the setup of the laser from across the room with smart phone and Huepar App. Huepar App is free to download and use, the App can switch ON/OFF the laser lines and pulse mode, select the laser planes, adjust the line visibility and provide out-of-level alarm.

✔️MULTIFUNCTIONAL 3x360 LASER TOOL: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depending on job site applications. With our smart pendulum system, this laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

✔️TRIPLE POWER TECHNOLOGY: This 360 laser tool employed the included large capacity lithium battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. In addition, this laser tool can be used at job site with direct input charging when taking out the battery. Charging protection helps prevent the tool from overcharge. 4 battery indicators on keypad allow users to know the current battery volume anytime.

⭐360-DEGREE VERTICAL and 360-DEGREE HORIZONTAL LINE- With its ultra bright 360-degree vertical and 360-degree horizontal green beams the 902CG Laser Level provides all-around leveling coverage with accuracy of ±1/9 Inch at 33 Feet and a maximum working range of 130 feet, enabling you to work in different parts of a large room simultaneously.

⭐GREEN LASER UNIT- This self-leveling cross line laser level adopt the bright Osram’s green laser unit, it is at least twice brighter than red lasers utilizing the same power source. The bright 360° laser lines allows the user to project a laser reference line around the room with accuracy to quickly establish level, enabling users to work in different parts of a room simultaneously.

⭐MULTIFUNCTIONAL MODE- One button operation makes it easy to project lines together or independently (cross line, vertical and 360-degree horizontal). With our smart pendulum system, the pendulum locks when the level is switched off. Simply, hold the top button 2 seconds to start manual mode, letting you project lines in any position or angle.

🔹 COMBINES PLUMB AND UP POINTS WITH CROSS LINE- Huepar M-9211G self-Leveling laser level offers two points plus a cross-line for a two-in-one laser. This hybrid point and line laser tool combines all the features of the Huepar line laser plus point-to-point plumb, giving contractors in the commercial and remodeling trades maximum versatility.

🔹 FINE POSITIONING- This laser level offers cross-line accuracy of +/- 1/9 inch at 33 feet, up point accuracy of 1/13 inch at 33 feet and down point accuracy of 1/9 inch at 33 feet. Class II 510-530nm laser product. We adopt the latest LD blue-green laser unit, It is at least twice brighter than red lasers utilizing the same power source.

🔹 SELF-LEVELING- The M-9211G cross-line laser features the Smart Pendulum System, you are able to self-level on an inclined surface within 4 degrees. If the surface inclines over 4 degrees, the laser will flash to indicate you are out-of-leveling parameters. You can be confident that you are within optimal leveling range. Secure transport lock protects pendulum when unit is switched off. Manual mode locks lines for use at any angle.

⭐【1H / 2V Multi-line Laser for Wide Application】: The laser level B21CG projects 360° horizontal line and two 120° vertical lines cover the floor, wall, ceiling around the room. The individual and combined laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

⭐【Dual Power Methods & Type-C Charging Port】: Huepar B21CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.

⭐【Brighter Green Laser & Outdoor Pulse Mode】: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 200 feet with Huepar Line Laser Detector.

⭐【Positioning Device for Line Lasers】: The bracket with 1/4"-20 male thread, the maximum depth from the 1/4''-20 thread to the back of the bracket is 8.5cm. It is compatible with most cross line laser levels with 1/4" female thread. If your laser level has a 5/8" female thread, please purchase the conversion screw adapter AD5/8 separately.

⭐【Multi-functional Auxiliary Back Clip】: A separate back clip included in the kit is compatible with most magnetic bases on the market, increasing the adsorption force of the magnets and stability. The Back Clip offers the ability to mount to any object up to 5cm thick. The vertical angle against the wall can be adjusted by the fine-tuning knobs as well as the opening size of the clip. A nail hole in the clip enables to be fixed firmly on the wall.

⭐【Multi-directional Fine-tuning Bracket】: There are four fine adjustment knobs on the bracket, help to adjust the left and right position within 3cm, the front and back position within 5.5cm, the height within 9 cm, and the horizontal rotation 360°. An added locking knob enables to fix the working height and avoid sliding up and down. The graduations are marked in inches and centimeters for easy readouts.

【High-Performance Laser】Exterior working range can be up to 700M in diameter with a detector, accuracy of +/- 1/8" at 100Ft. The red beam has strong stability, low power consumption, and high-cost performance. The red beam is more suitable for indoor use. The scanning speed can be adjusted at 0→300→600rpm, and the angle of scanning will continuously change as follows:0°→10°-→45°-→90°→180°-→0°.

【Automatic Alignment】 Electronic Horizontal self-leveling makes this rotary laser self-level up to 5° within 15s. If the RL300HR gets disturbed on the job it relevels itself automatically. The self-leveling motors are accurate to ±10 arc seconds. Slight movements can be ignored in windy or other vibrating conditions while turning on vibrate mode. In vibrate mode, the self-leveling function is deactivated and the cross is locked to use the device at any angle.

【Dual Slope Function】Electronic dual-slope function allows the user to perform a slope of 5 degrees in both X and Y axis. The slope of the Y-axis and the Slope of both X&Y-axis can be set by the remote control. This dual-slope mode works perfectly when checking grade, setting drainage, landscaping-terracing, or other slope work. This is a great laser tool for any job from DIY to large commercial construction, and everything in between.

24 Months Warranty & Lifetime Customer Support：Huepar is committed to providing Best-in-Class service to our customers- 24/7 Service Team（response in 24hrs & solution in 48hrs）; Worldwide Maintenance Center( your product can be repaired or replaced faster ). This laser level adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.

4 X 360°LASER LINES&REMOTE CONTROL:This laser tool projects 4D laser lines. The 360° horizontal floor laser line is for tiling installation at a 3/5" distance. The top 360° horizontal line can be used for ceiling installation. The 16 laser lines cross at 90°that can cover the floor, walls and ceiling all around the room. With the remote control, the four 360 laser planes can be selected individually at a distance up to 100Ft. Don't worry about touching the laser tool by mistake during leveling.

LONG WORKING TIME & TYPE-C CHARGING PORT: Huepar 904DG Laser Level employed a large capacity of 3.7V / 5200mAh Li-ion Battery and provides up to 6-12 hours of running time. The Li-ion Battery comes with a Type-C charging port that can be charged separately. When taking out the battery, this 4D laser level can be used at the job site by plugged in directly. The 16 lines laser level can also be charged by laptop, power bank, car charger, etc.

【4 x 360° with Top & Floor Line Laser】his laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. With the lifting base, the 360° floor laser can raise from the surface to go over and travel past uneven surfaces or obstructions between 1" and 3.54" height. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout.

【LCD Display & Bluetooth Tech】The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously.

【Triple Power Methods & Type-C Charging Port】This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc.

⭐360-DEGREE HORIZONTAL LINE - With one ultra-bright 360° horizontal and one 130° vertical green beams provides all-around leveling coverage even in big job-site. The bright 360° horizontal line allows the user to project a laser reference line around the room with accuracy to quickly establish level, enabling users to work in different parts of a room simultaneously.

⭐GREEN LASER UNIT- This self-leveling cross line laser level adopt the bright Osram’s green laser unit, it is at least twice brighter than red lasers utilizing the same power source. With accuracy of +/- 1/9 inch at 33 feet for lines, and a maximum working range of 130 feet.

⭐MULTIFUNCTIONAL MODE - One button operation makes it easy to project lines together or independently (cross line, vertical and 360-degree horizontal). With our smart pendulum system, this laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

⭐ONLY 1/3 feet: Huepar FL360G has the shortest distance (1/3 feet) from sea level. This means that you will get the first true laser level dedicated for tile laying on the market today. Ideal for tile alignment, wall studding, windows, doors, etc. And only apply to indoor working.

⭐PATENTED PRODUCT: Inspired of 2013 Xinzhu Global Mall Expo Taiwan Pavilion, this unique design make FL360G more professional and convenient for tile leveling. 360-degree horizontal laser provides all-around leveling coverage over a 98 feet diameter (depending on room illumination).

⭐EASY FAST AND ROBUST:Because of 360-degree horizontal laser line, you can save time on continuous leveling compared with the traditional level. Many people can do the tile laying at the same time at the each corner. Water and dust-proof to ensure years of dependable operation (certified at IP54).

⚠【HUEPAR DEDICATED RECEIVER】- Huepar LR-5RG receiver can ONLY be used with Huepar Line Laser Levels that have Pulse Mode Function‼ Please note the the receiver can NOT be used with Rotary Laser Level‼ And the receiver can NOT be used with Huepr 9011G&9211G laser level‼ It is recommended to use the detector in accompany with Huepar 901CG/902CG, BOX-1G/R, 8211G, 621CG/R, 622CG/R, 602CG/R, 603CG/R, GF360G/R, etc. Can also be used with Tacklife SC-L03 / SC-L04 Laser Level.

⚠【AVAILABLE FOR RED AND GREEN PULSE LASER】- It is NECESSARY to Turn ON the Pulse Mode of the Laser Level when using with Huepar LR-5RG laser receiver‼ The receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 200 feet.

⭐【Large Reception Window & Dual LCD Display】- Large reception window of 2 inches and optical and acoustic signals help to locate the laser plane quickly and accurately. Dual LCD displays for easy visual readout on both sides of the receiver. LCD backlight provides a clear look even in low light conditions. Adjust the height until the horizontal datum line and the arrow disappear on the LCD display.

⭐【3-Point Laser Level】: Huepar 9300G laser level projects two plumb points and one front point for fast, accurate layout of reference points positioning with the accuracy of 1/9in at 32ft. The laser tool will provide a lot of help in the decoration work, such as Hanging chandeliers and ceiling fans, Installing closets, Installing lighting systems, pipes systems and electrical outlets, etc. Unit points up/down and front to add squaring to plumb, level and align capabilities

⭐【Bright and Visible Reference Points】: Equipped with OSRAM laser unit provides bright green laser and stable performance. Bright green laser spots provide good visibility in bright working environments, which can help for leveling window and balcony, bricklaying, wall and railing construction, measuring whether the wall is vertical. Can also be widely used in construction, HVAC, electrical engineering, steel bolt frames, etc.

⭐【Efficient Layout & Smart Pendulum】: The 3-point laser level offers precise positioning and transfer of points.With the quick-setting pendulum, the traditional plumb bob is able to stop without redundant waiting. Under self-leveling mode, the laser tool can self-level in 3 seconds and indicates out-of-level condition within 4°. Activate the manual mode to lock laser beam for using at any angle by locking the pendulum .

⭐ Strong Magnet: 2 large pot magnets with all fittings for attachment to the wall mounts form a strong magnetic support, it can be used on the metal surface without tripods. Or hanging it on the nail or screws by the back slots.

⭐ Multi-functional: Adsorption, Hanging, Bind with a rope, adjustable angle up to 180 Degree.

⭐ 1/4" male thread mounts to laser level device, 5/8" female thread mounts to tripods, holes fit for the laser point.

✔️MOUNTING CLAMP: Huepar LP36M-S Mounting Clamp is designed especially for Laser Mounting Pole LP36.With a 3.5cm / 1.28inch diameter slot for easy mounting on poles. The clamp is equipped with an easy-to-use pressure lever, securely locking the pole in place to ensure stability and accuracy. Install several laser levels at different heights on the support bar, suitable for multiple people working at the same time, such as installing ceilings, windows and wall skirts at the same time.

✔️MULTIPLE INSTALLATION METHODS: Removable back clip and the strong magnets, the bracket can be attached to metal surfaces. Slots for screws, nails, raceways or optional straps are designed to make the installation much firmer. 5/8"-11 female thread makes it possible to be attached to a tripod or laser pole. Fix the bracket to the ceiling by two screws on the top of the bracket. Huepar LP36-M Positioning Bracket is ideal for any job site.

✔️360°ADJUSTABLE BRACKET: The bracket can be placed at any height of the rod according to your needs. With a Height Fine-tuning knob, help to adjust the height within 7cm / 2.76inch, and the horizontal rotation 360°. An added locking knob enables to fix the working height and avoid sliding up and down.

🔹 Enhances the visibility of laser line or point; Special reflective target film increases 1.3 times visibility of a red laser line or point when working over long distance or bright sunlight conditions.

🔹 Increments in INCH and CM: Easy to read scale with centre zero in both inches and cm markings.

🔹 Fix it in multiple Ways: Magnets for convenient attachment to metal studs, hole diameter for hook , back stand folds out to keep upright and steady on floor. Positioning hole designed for comfortable hand holding.

✔️This is a lithium battery for Huepar 603CG/603CR/602CG/602CR/S03CG/S03DG laser level only.

✔️Class 2 (IEC/EN60825-1/2014), <1mW power output.

✔️This is a lithium battery for Huepar GF360G/R laser level only.

✔️Class 2 (IEC/EN60825-1/2014), <1mW power output.

✔️This is a lithium battery for Huepar LS03CG/LS03DG/LS04CG/LS41G/L141G laser level only.

✔️This is a lithium battery for Huepar S03CG/S03DG/S04CG/S03CG-L/S03DG-L/S034CG-L laser level only.

✔️ARBITRARILY ADJUSTED TELESCOPIC ROD: Huepar LP36 Mounting Pole, an ideal telescopic rod for any worksite using tools that can be easily placed at any height between the floor and ceiling. The graduations are marked in black on the yellow pole in inches and centimeters.