Best Hurricane Turning Tools in 2026

Includes: 1/2" (5/8" Bar Stock), 1/4" (3/8" Bar Stock), 3/8" (1/2" Bar Stock) Bowl Gouges

HurricaneTools_HBG14, HurricaneTools_HBG38, HurricaneTools_HBG12

Used to turn the outside and inside of bowls and vessels

Tool Width: 1" | Thickness: 5/16"

Tool Length: 6" | Handle Length: 12" | Overall Length: 18"

Made from High Speed Steel with solid beech handle

Tool Width: 1 1/2" | Thickness: 3/8"

Tool Length: 7" | Handle Length: 16" | Overall Length: 23"

Made from High Speed Steel with solid beech handle

Tool Width: 1" | Thickness: 1/4"

Tool Length: 6" | Handle Length: 12" | Overall Length: 18"

Made from High Speed Steel with solid beech handle

Faceplate for Mid-size and Mini lathes

Faceplate Diameter: 4"

1" x 8 TPI - Thread Mount

Faceplate for Mid-size and Mini lathes

Faceplate Diameter: 3"

1" x 8 TPI - Thread Mount

Revolving live center for supporting work when turning "between centers" on the lathe

60 degree point which is the most common configuration for general purpose work

Keeps your work centered on the lathe while giving little or no drag resistance to the headstock drive

4" Scroll Chuck for woodturning. Hurricane chucks are known for their great quality and practical affordability

This 4" (100MM) chuck is made from steel with a chrome plated body. Includes Standard Dovetail Jaws, Screw, 6" Long Chuck Key, Allen Key, One threaded insert.

includes Standard Dovetail Jaws, Screw, 6" Long Chuck Key, Allen Key for removing the chuck jaws and your choice of one threaded insert.

Used in tailstocks to secure pen blanks on the mandrel

Eliminates damaged mandrels and out-of-round pen blanks by putting pressure directly on the pen bushing, not the mandrel

Adapts to almost every mandrel with a shaft diameter of .245" (6.22mm) or smaller; mostly commonly used with 7mm mandrels

5" Scroll Chuck for woodturning. Hurricane chucks are known for their great quality and practical affordability

This 5" (125MM) chuck is made from steel with a chrome plated body. Includes Standard Dovetail Jaws, Screw, 6" Long Chuck Key, Allen Key, One threaded insert.

includes Standard Dovetail Jaws, Screw, 6" Long Chuck Key, Allen Key for removing the chuck jaws and your choice of one threaded insert.

Female Thread Mount: 1" x 8 TPI

Male Thread Mount: 3/4" x 16 TPI

Material: Steel

4 prong drive center is the most common method of driving a workpiece between centers on the lathe

The 1" diameter of the center provides a strong grip so you can turn your piece without slipping

Headstock Mount: #2 MT (Morse Taper)

Bar Diameter: 3/8" | Flute Width: 1/4"

Flute Length: 4" | Handle Length: 15" | Overall Length: 24"

Made from High Speed Steel with solid beech handle

Tool Width: 1/2" | Thickness: 1/4"

Tool Length: 5" | Handle Length: 12" | Overall Length: 18"

Made from High Speed Steel with solid beech handle

Includes: 1/2" (5/8" Bar Stock) Bowl Gouge; 1/2" Spindle Gouge; 1" and 1/2" Round Nose Scrapers; 3/4" Square Nose Scraper; 3/4" Diamond Parting Tool; 1" Skew Chisel; 1" Roughing Gouge

HurricaneTools_HPT34D, HurricaneTools_HSC12R, HurricaneTools_HRG1, HurricaneTools_HSC1R, HurricaneTools_HSC34S, HurricaneTools_HSG12, HurricaneTools_HSK1, HurricaneTools_HBG12,

A perfect starter set of turning tools

Tool Width: 3/4" | Thickness: 1/4"

Tool Length: 6" | Handle Length: 12" | Overall Length: 18"

Made from High Speed Steel with solid beech handle

Includes: 1/2", 1", 1 1/2" Skew Chisels

HurricaneTools_HTT-119, HurricaneTools_HTT-116, HurricaneTools_HSK1

Used in spindle turning only and can create coves, fine finishes, edges, pommels and many other uses

Revolving live center for supporting work when turning "between centers" on the lathe

Revolving 3/4" diameter spur point which will not split your workpiece

Allows more freedom in re-positioning the tailstock on your piece

Tool Width: 3/4" | Thickness: 1/4"

Tool Length: 6" | Handle Length: 12" | Overall Length: 18"

Made from High Speed Steel with solid beech handle

Bar Diameter: 3/8" | Flute Width: 1/4"

Usable Flute Length: 8" | Handle Length: 14" | Overall Length: 24"

Cryogenically treated M2 High Speed Steel with ash handle, painted black with silver accents; made in Sheffield, England in partnership with Crown Tools

Serrated jaws are used for gripping end grain cylinders. They differ from dovetail jaws in that they are not tapered and have tiny gripping "serrations".

Jaw Dimensions in the CLOSED position: Compression Mode 2 1/4"; Expansion Mode 2 3/4"

Jaw Dimensions in the OPEN position: Compression Mode 4 1/8"; Expansion Mode 4 5/8"

Includes: 3/4" and 1/2" Skew Chisels

HTT-270AKW, HTT-270KW

Cryogenically treated M2 High Speed Steel with ash handle, painted black with silver accents; made in Sheffield, England in partnership with Crown Tools

Tool Width: 3/4" | Thickness: 1/4"

Usable Flute Length: 6.5" | Handle Length: 10" | Overall Length: 16.5"

Cryogenically treated M2 High Speed Steel with ash handle, painted black with silver accents; made in Sheffield, England in partnership with Crown Tools

Tool Width: 3/4" | Thickness: 1/4"

Usable Flute Length: 6.5" | Handle Length: 10" | Overall Length: 16.5"

Cryogenically treated M42 Powdered Metal High Speed Steel; Holds an edge 3X Longer than M2 HSS; made in Sheffield, England in partnership with Crown Tools

Tool Width: 1 1/4" | Thickness: 1/4"

Handle Length: 14"

M2 High Speed Steel (rockwell 62/64) with stained beech handles with brass accents; made in Sheffield, England in partnership with Crown Tools

An excellent choice for drilling pen blanks on the lathe. These jaws will center your pen blank and allow you to drill a perfect hole, every time. They also have extended Dovetail Jaws that are used in expansion mode for internal holding within a dovetail recess. The dovetail is set away from the flat jaw surface by about 1 inch. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe.

Jaw Dimensions in the CLOSED position: 1 3/4"

Jaw Dimensions in the OPEN position: Compression Mode 0.1"; Expansion Mode 3"

An excellent choice for drilling pen blanks on the lathe. These jaws will center your pen blank and allow you to drill a perfect hole, every time. They also have extended Dovetail Jaws that are used in expansion mode for internal holding within a dovetail recess. The dovetail is set away from the flat jaw surface by about 1 inch. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe.

Jaw Dimensions in the CLOSED position: 2 1/4"

Jaw Dimensions in the OPEN position: Compression Mode 0.1"; Expansion Mode 4 3/4"

Tool Width: 1/2" | Thickness: 1/4"

Usable Flute Length: 6.5" | Handle Length: 8 1/2" | Overall Length: 15"

M2 High Speed Steel (rockwell 62/64) with stained beech handles with brass accents; made in Sheffield, England in partnership with Crown Tools

Tool Width: 1" | Thickness: 1/4"

Handle Length: 14"

M2 High Speed Steel (rockwell 62/64) with stained beech handles with brass accents; made in Sheffield, England in partnership with Crown Tools

Includes: 1" Square and 1" Round Nose Scrapers

HTT-255KW, HTT-262KW

Cryogenically treated M2 High Speed Steel with ash handle, painted black with silver accents; made in Sheffield, England in partnership with Crown Tools