Best Ammco Lathes in 2026

Bottom of the stick is covered in a TPE material that prevents slipping and avoids marring

High visibility Yellow for easy identification in a busy shop

Extra tall Push Stick handle is tilted inward, away from blade or bit location

No More Noise – This Shark Industries Ammco 6920 style band functions as an effective silencer for vented rotors.

Adjustable Design – Use the adjustable features to get the perfect fit on either small or large rotor sizes.

Built to Last – This 9” silencer band is made with durable rubber and designed to hold up well over time.

60 Degree point

Ball bearing precision for smooth turning

1Mt arbor

Perfect for turning pens, bowls, cups, chess pieces, and other small workpieces

Features an 8-inch swing over the bed and a 13-inch distance between centers

Soft-start 3.2-amp motor starts gradually to prevent damage to the motor and maximize safety

Six Spindle Speeds: 500, 840, 1240, 1800, 2630, and 3975

24-Position Indexing: you can turn your object to just the right orientation

Enhanced Tensioning System: Easier access to belts for more precision

Attack work pieces up to 18 inches long and 12 inches wide

Switch between five different speeds: 520, 900, 1400, 2150, or 3400 RPM

Includes 3-1/8 inch Faceplate for turning bowls, cups and other non-spindle work pieces

Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change.

Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum.

5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing.

Innovative Design: Ratchet-style belt tension system (patent pending)

Optimal Speed: Choose from three speed ranges (60-900/110-1,800/220-3,600)

Convenient Controls: Easy-to-reach controls and digital readout

LARGE CAPACITY: 2 over-sized caddy compartments; Removable magnetic tray with hidden storage compartment

EASY TRANSPORT: Large aluminum handle and oversized access

CONVENIENT FEATURES: Built-in cell phone holder keeps your phone safe and in reach; Integrated magnetic tray, tape measure clip, screwdriver, and plier holders

Safety paddle switch

MT#1 spur center

MT#1 live center

This aluminum Sharpener body is only 87g. This grinding head is extremely simple and easy to use. Can grind 2 sizes of tungsten, with 2 angle tips for each size. 4 types holes are 1/16" (1.6mm) 15°, 1/16" (1.6mm) 20°, 3/32" (2.4mm) 15°, 3/32" (2.4mm) 20°. When ground on tips, 15° is 30° and 20° is 40°. Each type has 3 holes that will grind different circles on diamond wheels B07RHJ67PD, which will reduce diamond wheels consumption by 2 times.

Precise control makes the grinding tool grind a More perfect tungsten tip angle. All holes are stationary, so we can set an offset compensation for each size hole to make sure all tungsten's tip center is on the grinding center point, this offset can ensure that the lines on the tip of the tungsten electrode are as straight as possible.

The tungsten sharpening tool also has tungsten cut-off port processing. After the tungsten is worn or contaminated, you can use the cut-off port for cutting so that you can use it again. Besides, A Flat Grinding Block/Locator is specially designed and can be used to grind a flat tip vertically. All holes are designed to use the same height as the diamond wheel. Needn't set the height again and again. The open design makes the grinding wheel installation more convenient.

Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use.

Power: 100W Voltage: 24V DC Material: aluminum alloy and Acrylic Speed: 5000-8000 r / min, 7 grade speed Size: 310* 60 * 70mm 3x Hex shanks(0.059inch,0.079inch,0.098inch)

Maximum turning diameter: 70mm. Maximum clamping length: 180mm. Chuck clamping range: 0.6-6mm

Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.

Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.

With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.

KWL-1018VS replaces TCLC10VS. ETL Listed and certified by Intertek

Powered by 3/4 hp Variable Speed high performance motor(110V) & an SBC microprocessor. Two belt positions: 500-2000 RPM & 1500-3600 RPM

Headstock Thread 1" x 8tpi. Headstock/Tailstock Taper #2MT. Distance between Centers 18". Swing over Bed 10". Cast iron base

Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.

Super large torque ball bearing motor, maximum rotating speed up to 8000RPM providing ultra strong cutting power with low noise, you can use it at home.

Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.

Power of this YaeTek Mini Lathe: 80W - 100W

Voltage of this Mini Lathe Beads Polisher: 24V DC

Material: this Beads Polishing Machine has an aluminum alloy body & metal dust cover

Material: Aluminum alloy and Acrylic

Power:Voltage: DC12V-24V;Power :96W;Speed: 4000-9000/rpm;

Specification：Chuck: 0.6-6mm；Maximum turning diameter: 70mm；Maximum saw blade diameter: 50mm

18 PCS Gear Kits: Pack of 18 Set: 2 x T80 gears, 2 x T60 gears, 2 x T50 gears, 2 x T45 gears, 2 x T40 gears, 2 x T30 gears, 1 x T35 gears, 1 x T25 gears, 1 x T20 gears, 2 x Metal change gear set, 1 x timing belt pulley.

High-Quality Metal Material: Made of high quality metal, rust-proof treatment on the surface of gears for durability and long time use.

Precision Polished: The gears are milled by pricing milling skill to ensure high precision.

Sturdy Iron Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection

Infinitely Variable Speeds: Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included

Accurate 3-jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp, 1x 4-Jaw Independent Chuck, 1x Quick Change Tool Post and 4x Engineers Measuring Kit are included

1/2 Horse Power Motor: 1/2 Horse Power motor, Voltage: 110V. The powerful  motor starts softly offering motor's maximize safety and low noise.

4 Grade Speeds: The adjustable belts can be adjust with ease and accuracy within 3400 RPM, 1100, 1600, 2300, 3400prm available.

Large Work Capacity: 40" (1000mm) distance between centers, Cutting Diameter 14" (350mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Sturdy Iron Construction: The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, and professional. Mini metal lathe power of motor: 400W. The full-length splashguard provides maximum protection.

Infinitely Variable Speed: Variable speed from 50-2250 RPM. Forward and reverse at all speeds. Operate either manually or with the adjustable auto feed rate. The hardness and accuracy of the slideways are obtained by raw material, heat hardening and grinding. The emergency stop button included.

Accurate 3-jaw Chuck: 3-jaw self-centering chuck for setting materials steadily. Backsplash guard included. The spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm.

Width: 1 3/4"

Extra Long

Premium grad rubber

Sturdy Aluminium Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, sturdy, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splash guard provides max. protection.

Infinitely Variable Speeds: Spindle speed from 0-2250 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The hardness and accuracy of the v-slide ways are obtained by raw material, heat hardening and grinding. Emergency stop button included.

Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Back splash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004" / 0.01 mm.

ADDED PROTECTION: Inverter is completely enclosed.

SMOOTH MOVEMENT: Tailstock features ACME threads.

CONVENIENCE: Leg-mounted tool holder, and easy-to-access digital readout (DRO).

Product 1: Attack workpieces up to 20 inches long and 14 inches wide

Product 1: Adjust the variable speed anywhere from 250 to 3550 rotations per minute

Product 1: Includes 4 inch faceplate for turning bowls, cups and other workpieces

Mini lathe is driven by 12V safe direct current transformer. It is helpful for improving manual ability and independent thinking, thus effectively improving intelligence of children. So as to be a good didactical tool for children. It is also an ideal tool for DIY hobbyist and modelmaker to make various craft. 

This is a Micro desktop lathe which can used for turning, drilling, boring, threading and other processing Made of advanced aluminum alloy, durable and non-deformable for usage. Note: When processing harder materials, the feed rate should be smaller, and the operation of aluminum and copper materials should be slow. Patience is required.which is slower than processing wood.

Processing Materials: Wood, Plastic, Aluminum, Copper and other Soft Metal,CAN'T Processing Alloy,Brass Rod.Note: The harder the material, the smaller the depth of cut.we offer several shims for you to adjust the height of the turning tool.

For turning in miniature, even for series production of small parts

Powerfull, high torque drive with variable speed 1,000 - 5,000rpm

Centre distance 250mm and 40mm swing, ball bearing spindle bored through at 13/32" (10mm)

Variable Speed

16 TPI Reversible Lead screw

Forward and reverse in all speeds

【Large Torque Motor】Strong cutting power and lower noise. Rotating speed range: 5000-10000 RPM.

【7 Power Levels】This lathe machine can adjust the rotating speed using the 7 power levels adapter to meet different cutting need.

【High Quality Material】Machine base: Durable aluminum alloy. Drill chuck: High-quality pure steel.

Works with Ammco Brake Lathes