Best Psi Woodworking in 2026

Large live lathe center

60-degree point

Ball bearing precision; turns smoothly

Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key

This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories

The #2MT Arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included

The PSI Super Center Crown compatible with headstocks with #2MT spindles

Get a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive

Spring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied

Assemble and disassemble pen parts on one easy to use tool; Acts as traditional pen press to press your pen parts together; Disassembly function provides invaluable way to take virtually any pen apart

Included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6" of soft-grip tubing, (1) 7mm mechanism bushing for parts protection

Provides 250 lbs of pressure; Spring-loaded ram acts as a 3rd hand for quick, easy parts positioning; Sled mechanism slides the stop into position; Locking lever then securely locks the rod in place

This is a woodturning project kit. Hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included.

Includes (3) 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Woodturning Project Kits. You will receive (1) of each in: Gun Metal (PKCP8020), Chrome (PKCP8010), and Gold (PKCP8000)

Also includes the bushing set (PKCP3000BU) needed to make the pens

Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case

Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs. ; pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter

#1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8"; #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4"

This 3-step polishing system enables you to buff your woodturning projects directly on your lathe by mounting the included #2 Morse Taper mandrel in your lathe's headstock

System includes: (1) #2MT 16" heavy duty mandrel, (3) 8" fabric buffing wheels (Linen, Linen/Flannel Combo, Flannel), (3) buffing compound bars (Tripoli, White Diamond, Carnuba Wax), hardware packet, and instructions

Requires a lathe with a minimum of 1/2 horsepower and a heavy duty live tailstock center

Create a clean, smooth finish with these heavy-duty round end inboard scrapers; Thick, stable blades all you to cut aggressively without vibration

Blades are made from M2 High Speed Steel

Larger Scraper: 19" overall length with 6" blade and 13" handle; Blade is 1" wide and 3/8" thick

Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes

Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor; Chuck body weighs 4 lbs and is 4" in diameter

Includes #1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal; Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal

With it's deep flute, primary use is for turning bowls

Also used for dishes and other hollow forms mounted on a lathe's faceplate

Blade is made from M2 High Speed Steel

Ultra smooth, round hardened steel rod top will let you effortlessly glide your chisel or other lathe tool for superior results; Upper support rod will not nick or scratch

Post on all four toolrests is 5/8" diameter (15.875mm)

S-curve toolrest has 11" span with 3" long post with overall vertical length of 4"; 1-1/2" radius J-curve toolrest has 8" span with 2-3/4" post and overall vertical length of 4-1/4"

Set includes four bead sizes: 3mm, 6mm, 8mm, 10mm; Blades made M2 High Speed Steel; Hardwood handles with brass ferrules; Arrives in wood storage case

3mm tool is 12" in total length with a 3-1/2" blade and 8-1/2" handle

6mm tool is 13-3/4" in total length with a 5-1/4" blade and 8-1/2" handle

Premium long lasting HSS blades with beautifully turned and stained hardwood handles and brass ferrules

Includes:-1/4-inch roughing gouge, 1/8-inch spindle gouge,-1/4-inch round nose scraper, 3/32-inch parting tool,-1/4-inch skew chisel

Chisels are 10-inch in overall length, with 4-inch blades

Turn intricate details on larger turnings, or turn tiny intricate projects with this terrific micro set

M2 High Speed Steel

Set includes: 1/8" & 3/16" Spindle Gouges, 9/64" Beading Tool, 9/64" Diamond Point, 9/64" Square Nose Scraper, 3/8" x 1/8" Parting Tool, 1/8" Round Nose Scraper, 3/8" x 1/8" Skew Chisel

Fully adjustable wheels easily adapt to any position or spindle diameter down to 1/2".

3-point ball bearing spindle support.

Non marring soft wheels.

KWL-1018VS replaces TCLC10VS. ETL Listed and certified by Intertek

Powered by 3/4 hp Variable Speed high performance motor(110V) & an SBC microprocessor. Two belt positions: 500-2000 RPM & 1500-3600 RPM

Headstock Thread 1" x 8tpi. Headstock/Tailstock Taper #2MT. Distance between Centers 18". Swing over Bed 10". Cast iron base

Ideal solution for table saw safety and dust control; Connected to your dust collection system, it captures the dust thrown up by your table saw blade

Accepts saw blades up to 16"; Allows tilts for 45 degree cuts; Adjusts easily to suit thickness of material being cut

Boom extends up to 83"; Can be mounted to ceiling for maximum clearance; Easily swings out of the way if not needed for certain cutting jobs

Primarily used for aggressively reducing square spindle blanks to round, resulting in a rough cut blank ready for detailing with a spindle gouge, skew chisel, or other turning tool

Do not use a roughing gouge for bowl turning

Blade is made from M2 High Speed Steel

Primarily used for aggressively reducing square spindle blanks to round, resulting in a rough cut blank ready for detailing with a spindle gouge, skew chisel, or other turning tool

Do not use a roughing gouge for bowl turning

Blade is made from M2 High Speed Steel

Multigate switch system to control power to your dust collector

Turns on 220 volt D/C when opening blast gate, then off when last gate closes

Allows unlimited number of additional gates (1 is included)

With it's shallow flute, ideal use is for finishing spindles, pens, and other small woodturning workpieces

Can also be used for facing cuts, shallow hollowing, and beading

Blade is made from M2 High Speed Steel

Convert your lathe from Multi Speed to Variable Speed; Includes 3/4 HP variable speed motor, switch box controller, motor pulley, motor mounting plate, 7mm drill bit, metric allen wrench, and hardware

3/4 Horsepower Variable Speed Motor: Shaft is 15mm diameter by 2-1/4" long; Body is 3-3/16" diameter; Length from tip of shaft to back of end cap is 9-3/4"

Three belt positions; #1 650-1450 RPM; #2 1250-2800 RPM; #3 1600-3800 RPM

Add a little flare, style, and functionality to your penturning and other woodturning projects; With a single cut, chisel will cut 8 perfectly spaced finger grip beads within 3/4" wide area of your workpiece

Chisel blade is made from M2 High Speed Steel

Total tool length is 18" with a 7" blade and a 11" handle

This Special Edition C-Series package includes both the chuck system (CUG3418CC) and a set of 8-1/4" Flat Jaws (CJAWXL); Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi/full size woodworking lathes

Chuck body is pre-threaded to 1" x 8tpi, weighs 4 pounds, and is 4" in diameter; Includes a 3/4" x 16tpi headstock spindle adaptor

#1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal; #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal; Also includes a screw chuck, allen wrench, and a set of tightening levers

Large live lathe center

60-degree point

Ball bearing precision; turns smoothly

Large live lathe center

60-degree point

Huge live center for heavy duty workpieces

Specification: #3 Morse Taper (3MT) shank, 60-degree point, 4200 Max RPM, 900 lbs max workpiece weight, runout of 0.0006in/0.015mm T.I.R.

Material: The live revolving center is made of precision ground hardened steel, hardened to 61-65HRC, with high rigidity and wears resistance

Triple Bearing Design: The 3MT activity center adopts a combination of one thrust ball bearing and two ball bearings for stable and smooth rotation

Material: Carbide Tipped, Made of precise ground hardened steel of high accuracy

Model: MT2, Color: Silver

5000 Max RPM,12-28 NF Drawbar Thread,Hardened to 61-65 Rockwell

Angle: 60-degree point, Accuracy: 0.001mm Taper

Suitable for high-speed turning of metal or wood, CNC machining and general purpose of manual engine lathes.

Package includes: 1 x MT2 Taper

Made of high quality tool steel, high hardness, durable in use

Features excellent dustproof and liquid proof seal, long service life.

High accuracy, high rigidity and high wear resistance.