Best Tinkerbay in 2026

18.3 inch full size tool set can handle not only small projects like pens, knobs and goblets, but also large ones like bowls and barrels.

Carbide cutters are sharper, harder and much more durable than High Speed Steel(HSS), can easily cut man made resins, acrylics and extreme hardwoods. And you can start woodturning upon receiving the tools without sharpening.

When cutter gets dull, you can just rotate the cutter to use other sharp area, or simply replace with a new cutter and continue with your project.

Compatible with lathe that use 1”x 8 tpi thread, and 3/4" x 16 tpi using the adapter.

Package Include: Chuck Body and Round Jaws. Tightening Gear Key, T-Allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI.

Made from steel machined to allow closest tolerances is with electric coating for long term anti-rust performance

Compatible with lathe that use 1”x 8 tpi thread. This set contain 3 frequently used types of jaws and 1 large plate jaw so they can handle most shape and sized blocks

The jaws in this bundle tightly grips from the pens of 1/5” to bowls of 4”, and they can expand to hold the inside of large bowls if you are experienced with turning works thats larger than jaws

This set is easy to install and use. The jaw tightening key allow you to conveniently operate the gripping

Include 11" handle, 9" tool bar and pre-installed carbide cutter, wrench*2, aluminum alloy case with sponge liner.

Full Size tool set. The length of the tool bar can be adjusted freely to the maxmum of 20".

Top grade product. Tungsten carbide tip, stainless steel bar and aluminium alloy handle & case. Everything in this tool set is vibrant and reliable.

Link belt can be installed on pulleys to get rid of the clattering of an old machine. Be sure to roll on the pulley with tips of the belt point to the inside, it won't work when installed reversely.

These V belts offer freedom to adjusting length and replacing failed sections. A lot effort can be saved if you use needle nose pliers to do it. Then they can be rolled onto a drive just like a bicycle chain.

To re-tension, just roll the belt off, take out a link and roll it back on

includes one of each: 0250-0000 Tool Post; 0250-0001 Turning Tool Holder; 0250-0002 Boring,Turning Tool Holder; 0250-0004 Heavy Duty Boring Bar Holder, can use two size boring bars 3/8" & 1/2"; 0250-0007 Parting Blade Tool Holder, use 1/2" high parting blades; 0250-0010 Knurling and Turning Tool Holder

Provides built-in quick tool changing versatility.From fine precise work to heavy-duty cutting, these tool post insure smoother turning without chatter or vibration once they are quickly and easily installed on the lathe.

Made of steel. Perfect for mini lathe of 6-9”swing

PATENT PENDING - MAKE ACCURATE MARKINGS - To ensure precise markings, this brass wheel marking gauge features an engraved graduated ruler, which shows both metric and imperial measurement values.

👍 READY FOR EVERYDAY USE - Unlike other gauges that easily warp or break, this marking wheel gauge is built to last a lifetime, thanks to its solid brass body and hardened steel cutter.

👍 FINE CUTTING WHEEL ADJUSTMENTS - The marking gauge wheel is fitted with a micro-adjustable fence with 2 thumbscrews, which will make it easier for you to take measurements with pinpoint accuracy.

PERFORMANCE | The Arbortech Ball Gouge is a spherical shaped wood carving tool that can rapidly hollow small concave surfaces in woodworking projects

QUALITY | The Ball Gouge has a revolutionary, ring shaped blade that is self sharpening, rotatable AND replaceable to provide optimal value and durability and features Anti-Grab Technology, which helps prevent the tool from digging

TARGET GROUP | The 30 mm diameter ball-shaped wood cutter is ideal for carving smooth hollows in wooden spoons, small bowls and is useful for small to medium sculpting

Set turning, and facing tools on spindle axis for optimum cutting conditions.

Recessed body profile is compatible with boring bars.

Precision glass vial level with 30'/2mm sensitivity. Adjustable level mount.

American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher

17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5".

This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning immediately.

Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning, the results can be undesirable. With the Savannah Carbide Mini Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and with the flat bottom bars on each tool you’ll be able to easily turn most any type of project!

When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting edge. Carbide cutters will stay sharper longer when compared to standard turning tools. However, once needed, the cutters are replaceable. This set includes 2 of each cutter style and extra screws.

Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a shearing action as opposed to the traditional cutting method of standard turning tools. The shearing action of this type of turning produces much cleaner cuts and is easier than using standard turning tools.

The American made interchangeable turning tool handle accepts all Full Size Simple Wood Turning Tools, or other tools with a 1/2" dia round tang

CNC machined solid aluminium well-balanced handle with comfortable foam grip. 17" overall length x 1-3/8" diameter

American made in Ramsey, Minnesota by Harrison Specialties, a family owned and operated CNC machine shop

Four carbide tipped, CNC Machined, American-Made Simple Woodturning Tools, plus a 17" foam grip interchangeable lathe tool handle.

Carbide Wood Turning Tools feature replaceable carbide tips, which have multiple sharp sides and can be rotated for a fresh edge. Carbide stays sharp longer than steel, so you never have to sharpen again.

Each full size carbide wood turning tool is 12" long with 2.5" x 1/2" handle tang. Each turning tool fits in the 17" long foam grip solid aluminum core handle. Tool control is easy with 26.5" overall tool & handle length.

Includes: 1/2" (5/8" Bar Stock), 1/4" (3/8" Bar Stock), 3/8" (1/2" Bar Stock) Bowl Gouges

HurricaneTools_HBG14, HurricaneTools_HBG38, HurricaneTools_HBG12

Used to turn the outside and inside of bowls and vessels

For Lathe Swing 10-15''

Quick Change Tool Post (USA STYLE). Made of steel.

Style 2: Boring Turing & Facing

Benefits of Carbide Lathe Tools: Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood.

Tool Use: The Simple Turner & Hollower is the simplest to use carbide tool on the market. You’ll appreciate the simplicity with which your project can be quickly turned & hollowed to the desired shape using this tool. The Simple Rougher carbide tool makes roughing much simpler & less physical as most of the shock created by interrupted cuts is absorbed in the tool rest instead of your hands & arms. The Simple 55 Detailer carbide tool that provides a much higher level of woodturning creativity.

Handle Details: Premium quality solid aluminum, 100% USA made by American craftsman. CNC machined from aircraft aluminum for balance, durability, and to last for years. Covered with a soft, comfortable foam rubber grip to reduce hand cramping during long turning sessions and for great tool control. Overall length is 17"; outside diameter is 1 3/8"; tool opening is ½" diameter. Tools can be easily changed by loosening the two stainless steel set screws.

For Lathe Swing 10-15''

Quick Change Tool Post Holder (USA STYLE). Made of steel.

Style 1: Turning and Facing Holders

Model Number: 250-001 Turing and Facing tool holder

Tool bits range: up to 1/2inch

Material： Steel

We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning the results can be more than undesirable.

When the mini carbide turning tool cutter dulls, simply rotate the tip for a fresh, clean cutting edge. The carbide tips will stay sharper longer compared to standard turning tools as well

The tips are replaceable when needed (sold in a pack of 3 with one of each cutter in the pack). Unlike standard tools, when using carbide tipped cutter such as these, you keep the cutter straight in on the turning which produces a shearing action.

For Lathe Swing 6-12'', AXA

Style 2: Boring Turing & Facing

A: 15/16'' ; B: 1/2''; C: 7/16''; D: 1-1/2", Shank 1/2"

OSCARBIDE 3/8" Shank Heavy-Duty Lathe Turning Tool set, including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning Tools holder , 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder

Lathe Turning Holders are made of high quality steel with Nickel Cotated which are more durable moistureproof, dust-proof than general metal lathe cutting tools

Inserts are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose Metal Lathe cutting action

Size: Overall live center length with #1 Morse Taper arbor is 4-1/4", Cone is 1-1/4" diameter by 2" long

Application: Precision ball bearings for smooth, balanced turning. Ideal for many turn-between-center woodturning projects

Note: Place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use (not included)

Large live lathe center

60-degree point

Huge live center for heavy duty workpieces

When you need to finish sand the inside of your wood turned bowl it can be a challenge to keep the wood from showing scuff marks. Using a piece of hand held sandpaper can also be somewhat dangerous. Our bowl sander essentially fixes this issue by having a dual bearing, smooth rotating head that spins with the rotation of the bowl while the bowl is rotating on the lathe. The 9 inch long handle also helps keep your hands out of harms way.

The head assembly is completely adjustable so it can be set to any angle that you need depending on the size and curve of your project. Unlike most other bowl sander head assembly’s, our bowl sander has two steel bearings to provide you with super smooth mandrel rotation while sanding on your lathe. This also helps to reduce the chance of marking your wood since the sander will be rotating without hanging up or catching like so many other brands do.

It’s all about the pressure, or more like, its all about the light pressure and consistent technique. When sanding with the 2 inch bowl sander, applying too much pressure will likely produce some unsightly results. By applying light pressure and consistently moving the sander, you will achieve the results you are looking for and in a fraction of the time it typically takes when hand sanding your project.

The perfect grade of carbide provides the best combination of the sharpness and durability

Excellent for Hollowing bowls, Designed for all small &mid size hollowers Easy Finishers

Mounts with Flat head screws M5x8mm, Leaves smooth finishing after cut.

Include 11" handle, 9" tool bar and pre-installed carbide cutter, wrench*2, aluminum alloy case with sponge liner.

The length of the tool bar can be adjusted freely. For safety, please make sure the tool bar is fixed tighlty by both screws. So the total length of the tool should be within 19".

Top grade product. Tungsten carbide tip, stainless steel bar and aluminium alloy handle & case. Everything in this tool set is vibrant and reliable.

This center finder is perfect for laying out bowls, trays and platters

Finding the center of irregular shapes to optimize yield is simple and easy

Made from clear, fully transparent acrylic with a center hole and clearly marked circles in 5mm increments

Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square11 ×11× 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point)

Handle：wood material，Ergonomics design makes it more comfortable while doing turning job

Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability

Include 11" handle, 9" tool bar and pre-installed carbide cutter, wrench*2, aluminum alloy case with sponge liner.

The length of the tool bar can be adjusted freely. For safety, please make sure the tool bar is fixed tighlty by both screws. So the total length of the tool should be within 19".

Top grade product. Tungsten carbide tip, stainless steel bar and aluminium alloy handle & case. Everything in this tool set is vibrant and reliable.

Create a clean, smooth finish with these heavy-duty round end inboard scrapers; Thick, stable blades all you to cut aggressively without vibration

Blades are made from M2 High Speed Steel

Larger Scraper: 19" overall length with 6" blade and 13" handle; Blade is 1" wide and 3/8" thick