Best Peachtree Woodworking Supply in 2026

Ideal for sawdust collection and fume ventilation in woodworkng applications

Good abrasion and tear resistance

Excellent chemical resistance

When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!

Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.

PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.

This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.

Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.

The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process

This is the perfect sanding accessory that looks and feels just like a sander should unlike there distant cousins… sanding blocks. Sanding blocks are just that, sanding blocks. They can be kind of handy but keeping the sandpaper on the block can be a bit of a challenge and they are altogether clunky to use.

Other new fangled “sanding blocks” have clips that sort of work until they don’t and even more types force you to buy expensive sanding belts to fit there version of a “sanding block”. It would be great if we just use the sandpaper most of us already have in our shops. Introducing the Sanding Mouse!

A one of a kind, ergonomically designed sanding tool that is so simple and feels so familiar in our hands, it’s a wonder why it took so long for someone to think of it. The Sanding Mouse is made from a sturdy, yet flexible composite material and has a hook and loop base. The Hook and loop base is designed to accept orbital sanding discs that most of us already have in our shop.

When trying to find the center on rectangular, square or even round objects it can sometimes be challenging at best. While you could always measure the length, divide the number in half then measure to that point and mark it, why waste that valuable time.

The handy center finder ruler makes it super quick and super easy without having to do any math to find center. The exact center is clearly marked with a circle and a fine point arrow to make it easy to see.

To use the ruler, simply line the ruler up so that the increments are the same on both outside edges of the object your are measuring. Make your mark at the center point and there you have it! It literally takes seconds to find center with this super easy to use ruler.

The Extendable Heavy Duty Segmented Roller provides excellent leverage while applying pressure to linoleum, carpets, tile, wall coverings, laminates, large veneer projects and more! Projects that were once difficult are now a cinch with this rugged tool with its ergonomic, heavy duty leverage handle and rubber rollers.

The heavy duty cast leverage handle allows you lean into to apply as much pressure as needed and will take virtually all of your weight behind it. This helps you press and roll out your material as efficiently and as quickly as possible. Perfect for flooring projects

The extendable handle has a black, rubber handle bar style grip for comfort. With a simple counter clockwise twist, the secondary handle can be extended to a full 27” long! Talk about leverage! This makes it perfect for many different types of applications. Once you loosen the handle, simply pull it out too length up to 27” and then simply twist the handle back clockwise to lock it in. Now you will be able to apply pressure to most any project large or small.

Sometimes you need to have your work surface just right for your projects. Whether you’re a woodworker, metal worker or hobbyist, when you need a flat work surface you simply just need it. Finding an economical tool to check for flatness used to be quite the challenge. Not anymore!

Introducing the lightweight and easy to use Fulton Aluminum straight edge. Use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working.

The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.

No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.

Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.

Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.

When trying to find the center on rectangular, square or even round objects it can sometimes be challenging at best. While you could always measure the length, divide the number in half then measure to that point and mark it, why waste that valuable time.

The handy center finder ruler makes it super quick and super easy without having to do any math to find center. The exact center is clearly marked with a circle and a fine point arrow to make it easy to see.

To use the ruler, simply line the ruler up so that the increments are the same on both outside edges of the object your are measuring. Make your mark at the center point and there you have it! It literally takes seconds to find center with this super easy to use ruler.

Why use a foam brush versus a standard bristle paint brush? That’s a question people ask themselves all the time. The simple answer is you should use both. While using bristle brushes for larger areas and using foam brushes for cut-ins is a common use, foam brushes can be used for quite a few applications throughout the home, shop or workplace.

Foam brushes produce a smooth, brush-stroke-free appearance to your project when finished. A smooth appearance is desirable for many different projects like when working on furniture, cabinetry, trim, model work, metal work, indoor applications, outdoor applications and a whole lot more. Not recommended for use with shellac or lacquer applications.

If you’re a woodworker or have worked with wood projects, then you already know the value of having foam brushes on hand. Staining and varnishing wood is a fantastic way to use foam brushes. Simply dip the brush into the prepared stain and apply in even strokes or drizzle a little stain on the wood and quickly spread it in long, even strokes. A rag can be used to wipe off excess stain, or you can flip the brush over to remove excess stain.

We have all experienced the same issue. We start collecting router bits and little by little we realize that we have nowhere to put them. To even further complicate things, our router bits are both 1/4" and 1/2" shanks!

We could always make our own storage out of a piece of wood, but the problem with that is the wood, wears and starts to slip after a while.

The 1-5/16" thick foam router bit tray is a perfect storage solution for all those heavily used router bits that are currently in your drawers, on your shelves or in the router itself.

This is the perfect sanding accessory that looks and feels just like a sander should unlike there distant cousins… sanding blocks. Sanding blocks are just that, sanding blocks. They can be kind of handy but keeping the sandpaper on the block can be a bit of a challenge and they are altogether clunky to use.

Other new fangled “sanding blocks” have clips that sort of work until they don’t and even more types force you to buy expensive sanding belts to fit there version of a “sanding block”. It would be great if we just use the sandpaper most of us already have in our shops. Introducing the Sanding Mouse!

A one of a kind, ergonomically designed sanding tool that is so simple and feels so familiar in our hands, it’s a wonder why it took so long for someone to think of it. The Sanding Mouse is made from a sturdy, yet flexible composite material and has a hook and loop base. The Hook and loop base is designed to accept orbital sanding discs that most of us already have in our shop.

When building sleds or fixtures, workshop tables, router table tops or any type of jig or fixture that helps hold stock in place or helps feeding stock through a cutter, miter t track will help make it so much easier. Miter T Track does this by allowing devices like miter gauges to effortlessly slide through the track for cutting applications and it can also accept fixtures with the proper hardware like featherboards to keep your stock firmly against a fence.

The Miter T Track has a “T” shape to it so that it can accept the discs on the ends of many miter gauges. This essentially means that your ¾” x 3/8” bar on your miter gauge will fit neatly into this track even with the disc on the end. Of course you don’t have to have a bar with the disc on the end. Wether you’re making a table top for your router, your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!

The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures.

As the old saying goes; “you can never have too many clamps” if you’re a woodworker. This holds especially true when it comes to achieving near seamless or tight fitting joinery. While using long bar clamps or pipe clamps to glue up panels will work, sometimes you may need a helping hand or “pinch” in certain cases to get the seem just right. Using pinch dogs to pull your or “pinch” the panel joint together is an old tried and true method that is still commonly used today.

Pinch dogs can be used in two basics ways. The most common method is to tap the pinch dog into the end grain of two boards with one of the points of the pinch dog on one board and the other point of the pinch dog on the other board. The pinch dog has two tapered points that pull the wood toward the center of the pinch dog as it is driven into the wood. The more you tap the pinch dog into the wood, the tighter the fit becomes.

The second method typically takes some planning to be sure that we are not marking up the good side of our workpiece. With your boards laying flat, tap a pinch dog into the flat side of your panel along the seem every couple of inches. Tap in as many as needed to achieve a tight fitting joint. This method is most commonly used on table tops where the pinch dog marks are either concealed by other project pieces or won’t be seen since the marks are out of plain view.

The simple and easy to use Square 90 will become your third hand while assembling cabinets, drawers, boxes or any project that requires a 90° corner to be held in place while assembling. You can use the Square 90 in multiple situations where a 90 degree angle is needed. It can be used on a standard 90, a t-joint, outside 90 degree, all four corners and more! Made from high impact polycarbonate, the Square 90 is strong and durable enough for any project. It can be clamped on the inside or outside

It can be clamped on the inside or outside corner of your work piece making this a very versatile Clamping Square for any project. The Square 90 is secured to your stock using either an F-Clamp (NOT INCLUDED) or a C-Clamp (NOT INCLUDED). Achieving 90 degree corners just became a whole lot easier!

Can be used on a standard 90, a t-joint, outside 90 degree, all four corners and more

Sometimes you need to have your work surface just right for your projects. Whether you’re a woodworker, metal worker or hobbyist, when you need a flat work surface you simply just need it. Finding an economical tool to check for flatness used to be quite the challenge. Not anymore!

Introducing the lightweight and easy to use Fulton Aluminum straight edge. Use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working.

The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.

Easily locate and drill pen blank centers and Drill through the exact center of your pen blanks with this simple but effective Pen Centering vise. By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens.

The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise.

Just set up the vise once and drill all of your blanks in the exact center. There is no need to change the setup regardless of the blanks size or shape.

Reducing a 4 inch dust port on your machinery has never been easier! With our 4 inch to 2-1/2 inch hose reducer fitting and rubber coupler you can connect a 2-1/2 inch hose directly to a 4” port on machines like band saws, table saws, large planers and more. This convenient combo pack is designed to accept most standard size 4 inch dust collection fittings such as Y’s, T’s, Elbows, Blast gates, Dust ports and other standard size 4 inch dust collection fittings.

Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most professional and us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision.

Two stainless steel hose clamps help provide a tight seal on the 4 inch end and keep the reducer from falling out. These clamps fit neatly into the slots around the coupler so there is no slipping when tightened. Each clamp has a universal nut that can be tightened with a flat head or a Philips head screwdriver. The nut can also be tightened using an appropriate size socket wrench.

🇺🇸 The idea behind using UHMW material for making jigs and fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly.

🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.

🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.

🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly

🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.

🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.

When you need to finish sand the inside of your wood turned bowl it can be a challenge to keep the wood from showing scuff marks. Using a piece of hand held sandpaper can also be somewhat dangerous. Our bowl sander essentially fixes this issue by having a dual bearing, smooth rotating head that spins with the rotation of the bowl while the bowl is rotating on the lathe. The 9 inch long handle also helps keep your hands out of harms way.

The head assembly is completely adjustable so it can be set to any angle that you need depending on the size and curve of your project. Unlike most other bowl sander head assembly’s, our bowl sander has two steel bearings to provide you with super smooth mandrel rotation while sanding on your lathe. This also helps to reduce the chance of marking your wood since the sander will be rotating without hanging up or catching like so many other brands do.

It’s all about the pressure, or more like, its all about the light pressure and consistent technique. When sanding with the 2 inch bowl sander, applying too much pressure will likely produce some unsightly results. By applying light pressure and consistently moving the sander, you will achieve the results you are looking for and in a fraction of the time it typically takes when hand sanding your project.

The highest abrasion resistance. Size is is apx 1/2" x 4" x 48"

Outstanding impact strength even at low temperatures.

Excellent sliding material due to low coefficient of friction

Designed with the turner in mind. Thread your wooden blanks directly onto the chuck as opposed to using a bulky 4-jaw chuck. This method proves to be more cost effective and more efficient during the turning process. Many woodturners prefer turning their stopper blanks with this small, durable and compact design.

This precision machined bottle stopper chuck is specifically designed to mount a bottle stopper blank to your lathe. It has a 3/8" x 16tpi threaded stud which matches most all bottle stoppers. The Bottle Stopper Chuck threads directly onto your 1” x 8 tpi lathe headstock spindle. This small compact design does not get in the way of turning compared to larger chucks.

After the blank is drilled and with the included brad point drill bit, the blank can be easily threaded onto the chuck and is ready to be turned. As with all items that are used with power tools or machinery, please follow ALL instructions and safety precautions when working on your project.

Made from heavy duty cloth backing our abrasive rolls are the perfect economical replacement sandpaper rolls for your Performax and Jet 16-32 and other machinery that accepts 3” wide rolls. These high performance aluminum oxide rolls are designed for all purpose sanding. The grain is resin bonded and have non-loading properties for extra long sanding life. MADE IN THE USA!

The rougher or lower grits like 60 grit can be used for abrasive planing and dimensioning. The medium grits like 80, 100 and 120 are typically can be used for lighter dimensioning projects and general surface prep. When using 150 grits and 220 grits we recommend using those higher grits for finishing passes only.

The right amount of pressure you exert on your boards is absolutely critical. Too much and it will shorten the life of your abrasive roll, burn the material or cause problems with the motor on your machinery. To avoid too much pressure, with your machine turned off, place the material under the sanding drum, the raise or lower the drum so the drum contacts the material but can still be rotated by hand. Take the stock out with no more drum adjustment and proceed to sanding normally.

Quickly set-up, tune up, and check the accuracy of your shop's tools with this system. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, out-feed table alignment; router/shaper spindle run-out, or any other set up or alignment measurement you desire.

The A-LINE-IT Basic Kit is the perfect starter kit for hobbyists and small shops.

The 1" capacity dial indicator reads in .001" increments for absolute precision. Self adjusting miter groove bar with leveling screws and spring plungers for perfect fit in your miter slot.

When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!

Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.

PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.

No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.

Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.

Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.

Made from heavy duty cloth backing our abrasive rolls are the perfect economical replacement sandpaper rolls for your Performax and Jet 16-32 and other machinery that accepts 3” wide rolls. These high performance aluminum oxide rolls are designed for all purpose sanding. The grain is resin bonded and have non-loading properties for extra long sanding life. MADE IN THE USA!

The rougher or lower grits like 60 grit can be used for abrasive planing and dimensioning. The medium grits like 80, 100 and 120 are typically can be used for lighter dimensioning projects and general surface prep. When using 150 grits and 220 grits we recommend using those higher grits for finishing passes only.

The right amount of pressure you exert on your boards is absolutely critical. Too much and it will shorten the life of your abrasive roll, burn the material or cause problems with the motor on your machinery. To avoid too much pressure, with your machine turned off, place the material under the sanding drum, the raise or lower the drum so the drum contacts the material but can still be rotated by hand. Take the stock out with no more drum adjustment and proceed to sanding normally.

The EZ-Align Shelf Pin Jig is a dual drilling jig that allows you to drill two rows of shelf pin holes that are perfectly aligned every single time! This eliminates that chance for rocking the frustrating wobbling shelves. The EZ-Align jig also provides perfect vertical spacing of 1-1/4" (32mm) between pin holes.

Two dual purpose star indexing pins are included to make aligning of your holes a breeze. Each pin can index either 1/4" pin holes or 5mm pin holes (both the 1/4" & 5mm self centering drill bits are included). The index pins allow you to drill holes in runs that are longer than the jig and help keep the jig from moving so you don’t need clamps.

The jig also features a 50mm index from opposite side of the jig for larger or wider shelves. Sometimes we need to make deeper or wider shelves and the 50mm offset makes this possible by shifting the pin holes back further so the shelf sits better than the outward holes

Acid glue brushes are a small, multi-purpose and disposable type of brush. These brushes got there start in the plumbing industry. They were typically used for applying acid flux for pipe soldering applications. Nowadays, acid glue brushes are used for a wide variety of applications and a perfect for homeowners and professionals alike.

These brushes can be used for many different projects around your home, workshop or in various professional settings. They are ideal for applying wood glue to small areas like shelf joints and dado slots, biscuit slots, dowel holes and more. Acid glue brushes also work great applying flux, grease, oil and can be used for cleaning delicate items around the shop and home.

Each brush has soft, horse hair bristles which make them great for many different applications. Getting into to tight, delicate spaces is easy and quick. When you need to clean out things like small camera lenses on your mobile phone or the viewers on your DSLR camera, these brushes will certainly do the trick. You can even clean your computer keyboard without damaging or leaving any sort of residue behind.