Best Stand Band Saws in 2026

2-1/2-inch cut capacity of the metal band saw cuts up to 2-inch SCH 40 pipe

Centered handle position of the portable band saw provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue

LED Work Light with 20 second delay illuminates dark work surfaces for accurate cutting of DEWALT band saw.

MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM

LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability

MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

Volts DC: 18

Type: Band Saw, Bare Tool

3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide

Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size

Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees

Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish

Features a spacious 30-by-6-inch table

Remove 0 to 1/8 of an inch of material with each pass

Huge cutting capacity makes cuts up to 5 inches wide and 5 inches deep

Variable speed operation adjusts the blade speed anywhere from 60 to 420 feet per minute

Powerful 10-amp motor glides through metal, plastics, and more

STAINLESS STEEL - This sturdy band saw stand is constructed from solid steel and provides reliable, sturdy support for effective operation of your band saws.

BAND SAW STAND - Designed to fit RIKON 10-300/10-305 and Sears 921400 bandsaws.

SLIP PREVENTION - Non-slip rubber tips on each of the stand's four legs keep it securely in place during use. The rubber tips also protect your floor or shop surface. Four support braces and carefully designed leg angles provide additional stability.

2.8-amp motor rotates the blade up to 2500 feet per minute

Create cuts up to 3-1/2 inches deep and 9 inches wide

Uses 59-1/2-inch blades anywhere from 1/8 to 3/8 inches in size

No coolant required and produces virtually no sparks

Easier to use than a hacksaw

Compact and portable

Huge Cutting Capacity: The cutting capacity of the band saw: without base: 4.7"x4.7" deep-cut capacity for rectangular stock, 5" capacity for round stock. With base: 3.9"x3.2" deep-cut for rectangular stock, 3.93" for round stock.

Powerful Motor: 1100W 10 amp powerful, pure copper motor, designed with controlled power to withstand any jobsite application. Cutting Speed: 137.8-472.4ft/min, provides quick and smooth cutting with no sparks and burrs.

Ergonomics Design: Superior balance allows for more accurate cuts. Ergonomic soft grip back handle provides comfort during use. The saw blade guard can be adjusted to avoid the saw blade from jamming and is safer without hurting your hands.

Adjust the blade speed anywhere from 125 to 260 feet per minute for compatibility with a variety of metals

Beveling blade helps create cuts anywhere from 0 to 60 degrees

Cut pipes up to 5 inches in diameter or rectangular materials up to 5 x 4-7/8 inches in size

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, Carbon and Aluminum arrow shafts, and mini model making

High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel- no sanding required!

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, arrow shafts, and mini model making

Longer Saw Life: Blade drive is a steel, heat-treated worm driving a bronze worm gear in an oil bath.

Added Stability: Heavy-duty 14-gauge steel stand (with shelf) has been redesigned for rigidity and ease of use.

Easy Mobility: Handle and wheels for easy movement.

9.5-amp motor creates cuts up to 8.85 inches deep and 13-3/8 inches wide

Uses 100-3/4-inch blades anywhere from 1/8 to 1 inch wide

Spacious 21-1/2 x 15-3/4-inch work table bevels up to 45 degrees

Quiet, precise and vibration-free for fatigue free use

Low weight and slim design, without ever compromising performance

High quality precision tools

POWERFUL 2.8 AMP INDUCTION MOTOR—Rip through a variety of wood materials with the 2.8 amp induction motor

2-SPEED DRIVE SYSTEM—Allows tool-free belt tensioning

QUICK BLADE TENSION SETTING—Set blade tension quickly and accurately for clean cuts

Extruded aluminum fence for ripping normal workpieces or resawing veneers

Combination 2", 3", 4" dust port

Steel stand with vibration-resistant rubber feet

Toolless Adjustments: Independently adjustable, upper and lower ball bearing guides

Optimum Blade Support: Rigid, four-sided guide post with rack and pinion adjustment

Three Heavy-Duty Tensioning Settings: Full tension, partial tension, and full release

🔥【CAUTIONS & WARNINGS】For your own safety, please read the manual carefully before using and strictly comply with the rules of "Precautions". Correct using and proper maintenance methods can increase its lifespan.

🔥【Powerful Motor】Prostormer Table Saw adopts 15A powerful power, the maximum cutting power can reach about 5000 PRM.

🔥【Rip Fence Scale & Miter Gauge Scale】RIP FENCE SCALE shows the distance from the blade to rip fence. MITER GAUGE SCALE can be adjusted from -45° to 45° for cross cutting.

Product 1: 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide

Product 1: Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size

Product 1: Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees

Adjustable toolless material stop.

Four 8" Rubber Wheels for Ease of Movement.

Heavy Casted Iron Bow and Bed.

Versatile bandsaw portable table suit different models of band saw. Following is the applicable model of this band saw table portable, please take a reference. For Milwaukee Deep Cut Model #'s 6230, 6230N, 6232, 6232-5, 6232.51 6232-55, 6232-6, 6232-6N, 6232-8N, 6236, 6236N, 6238, 6238-8, 6238N, 0729-20, 0729-21. For Dewalt Deep Cut Model #'s DWM120, DWM120K, D28770, D28770K, DCS374B, DCS374P2. For Harbor Freight Bauer Deep Cut #'s 63763, 63444, 62800, 1678E-B, For Home Depot WEN Brand # 94396, for Makita Deep Cut Model #'s 2107F, 2107FK, 2107FZ, XPB02Z, BPB180Z-18VOLT, Bosch GCB10-5.For Grizzly Tools Deep Cut Model # G8692.

Easy installation with complete accessories and tools. Screws, hex screwdriver, wrench and a hook and loop tape will come with our portable band saw table for bandsaw. According to the experimental results, the installation of the portable band saw table stand can be completed in about 15 minutes under the guidance of manual and installation video

Stable construction with triangular table legs and locknut. The triangular table legs conform to the mechanics principle, which makes the portable band saw table for bandsaw more stable.

Compatibility: Designed for the Powermatic PWBS-14 Band Saw.

Save Space: Allows your shop to be versatile and organized.

Strong Support: Heavy-duty frame is welded tubular steel.

9"x12" WORK TABLE: In the vertical position.

RAPID ACTION VISE: Miters to 45°.

STORAGE CABINET AND CHIP TRAY: Improved height and width of stand.

Compact Benchtop Design: Easy transportation to different shop locations.

Ideal Starter Saw: Easily handles smaller cut application work and is suitable for scroll sawing (accommodates 1/8"-1/2" blades).

Increased Rigidity: Upper and lower cast iron frame.

Fits Milwaukee portable band saw models 6232-20, 6232-21, 6238-20, 6238-21, 2729 only.

Use as chop saw or vertical band saw

Includes Vertical Table and Clamp

Motor: 1/3 HP, 120V, single-phase, 2.8A

Max. cutting width left of blade: 9"

Max. cutting height (resaw capacity): 3-5/8"

Impeccable Cutting Proficiency: Are you ready to cut into an unbelievable experience? The woodworking bandsaw can cut wood with a maximum cutting height of 6 inches. Max. Throat Width: 9.65 in / 245 mm, Sawblade Length: 72.13 in / 1832 mm, Max.Sawblade Speed: 890 m/min±10%.

Two-speed Adjustable: The benchtop band saw comes with a high-performance motor that can deliver a powerful 1/2 HP 370W output while providing overheat protection for added security. The benchtop band saw features an 1100 RPM maximum speed and 560 RPM minimum speed, accommodating their specific needs.

Multi-angle Cutting: The wood bandsaw features a tilting table that can be adjusted from 0 to 45°, allowing for more flexibility when cutting. The sawtable size is 13.39 x 13.19 in, made of Q235 steel for added strength and durability. By tilting the table 45 degrees to the right, you can easily cut bevels with precision and ease.

【Compatibility】Compatible with Husqvarna 36/41/51/55

【Replacement Number】Replace OEM 501 76 31-01

【Condition】Brand new parts!

Product 1: Parallel-arm design combined with heavy duty steel construction limit vibration and reduces noise

Product 1: Spacious 25-5/8-by-16-inch steel table bevels up to 45 degrees to the left and 30 degrees to the right

Product 1: Dual side panels flip open for easy-access tool-free blade changes