Best Viking Mountain Tool Works in 2026

With then Miter gage you get 27 Precision determined Stop Positions every 5 degrees from 0 to 60 degrees in both directions plus two additional at 22.5 degrees, useful for 8 sided Octagons.

The miter bar is designed for a snug fit in Machines with a 3/4" by 3/8 inch miter slot (.740 to .760). It will also work with a 3/4*3/8 inverted T slot.

The fence mounting slots in the protractor head are designed to work with our 24 inch precision aluminum fence with stop, our 18 inch Box Joint Fence, or most commercially available fences available from other manufactures.

With then Miter gage you get 27 Precision determined Stop Positions every 5 degrees from 0 to 60 degrees in both directions plus two additional at 22.5 degrees, useful for 8 sided Octagons.

The miter bar is designed for a snug fit in Machines with a 3/4" by 3/8 inch miter slot (.740 to .760). It will also work with a 3/4*3/8 inverted T slot.

The fence mounting slots in the protractor head are designed to work with our 24 inch precision aluminum fence with stop, our 18 inch Box Joint Fence, or most commercially available fences available from other manufactures.

Jessem 02120- Double sealed ball bearings, for super smooth rotation and a lifetime of use even with the heaviest of routers.

Jessem 02120 Patented tension feature, removing backlash. Mast-R-Lift II has a built in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy duty, long term routing operations.

Triton TFBR001 moror is a dirrect replacement for the PC7518 or PC7519 4.2 inch diameter motor

Offer for 1 pair of 24 inch open Parallel Fixed Jaw Cabinet Makers clamp Actual opening is 24.75 inch to allow for a full 24 inch glue up panel that still allows for trimming to full 24 inch width.

Great for clamping Cabinet Boxes for gluing and screwing or nailing

Parallel Jaw clamps put even pressure on your panel glue-up to keep your panel flat

This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level

High visibility reverse contrast display improves visibility in dimly lit work environments

Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces

[WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two

[CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer

[LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store

[WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two

[CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer

[LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store

FOR LAYING POULTRY: Our crushed oyster shells are crafted to provide essential calcium for all laying poultry including chickens, ducks, and quails; from backyard flock to commercial farms, our product is the perfect addition to your chicken feed

OYSTER SHELL & CORAL CALCIUM: Our chicken oyster shells are made from a blend of crushed oyster shells and coral calcium, ensuring that your poultry receive a high-quality source of chicken calcium that is easily digestible

STRONGER EGGSHELLS: Our crushed oyster shells are an excellent source of calcium for chickens, providing the necessary nutrients for proper eggshell formation, resulting in high-quality eggs and a healthier flock overall

Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops

The mitre saw has a precise miter system and machined base fence support

Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw

Product 1: Protect hands and prevent kickback like never before

Product 1: Powerful high-friction durable grip for extreme hold

Product 1: Precision cutting and control down to 1/4" Ripping

Powerful 15-amp motor delivers 5 300-RPM for greater speed and faster cuts

7-1 4-inch carbide-tipped blade included. Spindle lock for easy blade changes.

51° bevel capacity with a positive stop at 45° for a wide variety of cuts

Committed to bottles made from 100% recovered coastal plastic*

*Recovered Coastal Plastic, in partnership with Plastic Bank, is post-consumer recycled plastic collected on land within 31 miles of an ocean so that it does not reach oceans or landfills.

Windex Ammonia-Free Glass Cleaner leaves an amazing streak-free shine

HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision

CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts

BEVELED CUTS - Makes beveled cuts up to 45 degrees

Protect hands and prevent kickback like never before

Powerful high-friction durable grip for extreme hold

Precision cutting and control down to 1/4" Ripping

13 Amp motor for more power and performance than the SKIL 5380

15% weight reduction vs. SKIL 5380, reduces user fatigue

51-Degree bevel with positive stops for great cut capacity

Impact Tough design – provides 10X life over standard bits, with an Xtended Torsion Zone, hardened core and precision tip

Xtended Torsion Zone – helps to absorb the torque peaks of impact drivers to avoid breakage

Precision-engineered bit tips – deliver a better fit and less cam-out

GLUE GUN PISTOL

NOZZLE WITH HEAT PROTECTION COVER AND DRIP BLOCK

MECHANICAL AID; PRECISION NOZZLE, ACCURATE, POSITIVE APPLICATION

Included Components: Cooks' Tools;Pasta Tools;Pasta Makers

Axe is designed for splitting firewood

Premium 2.65 lbs. steel axe head is coated to improve cutting

Perfect balance and weight distribution

Thin kerf for fast and smooth cutting action

Computer balanced plate reduces vibration for improved accuracy and better finish

Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy

2-1/2" cut capacity cuts up to 2" SCH 40 pipe

Centered handle position provides superior balance and ergonomics

LED Work Light with 20 second delay

Miter saw crow stop accurately positions crown molding vertically against the saw fence

Includes 2 stops - one for each side of the blade

Designed to work with DEWALT models DW703, DW706, DW708, DW712, DW715, DW716, DW717 and DW718

Durable steel construction

Easy setup and break down with excellent stability

Designed for easy loading and unloading into and out of vehicle

Patented axial-glide system for durable precision and compact workspace

Expanded cutting capacity: 14-Inch horizontal capacity, 6-1/2-inch vertical capacity, 6-1/2-inch crown capacity (45-degree spring)

Large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles

2-1/2" cut capacity cuts up to 2" SCH 40 pipe

LED Work Light with 20 second delay

Matrix II High Speed Steel Edge for Heat and Wear Resistance

TiCo Hi-Density carbide for increase performance

Perma-Shield non-stick coating protects from heat, gumming, and corrosion

Super thin laser cut kerf for fast, durable, and clean cuts

2-1/2-inch cut capacity of the metal band saw cuts up to 2-inch SCH 40 pipe

Centered handle position of the portable band saw provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue

LED Work Light with 20 second delay illuminates dark work surfaces for accurate cutting of DEWALT band saw.

Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy and visibility for the 12-inch miter saw blade

XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline once the saw arm is lowered

Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated

DCD771 Drill/Driver in the cordless drill combo kit is compact (front to back) and lightweight, designed to fit into tight areas

DCF885 Impact driver in the cordless tools combo kit offers 1-handed loading for its 1/4-inch hex chuck and accepts 1-inch bit tips

DCS355 Oscillating tool in the drill/ impact driver combo kit offers a Quick-Change accessory system that allows blades and attachments to be changed quickly without wrenches.

JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cut through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge.

JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts.

MADE IN JAPAN: All SUIZAN woodworking tools are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years.