Best Metal Table Saws in 2026

[WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two

[CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer

[LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store

Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops

The mitre saw has a precise miter system and machined base fence support

Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw

Powerful 15-amp motor delivers 5 300-RPM for greater speed and faster cuts

7-1 4-inch carbide-tipped blade included. Spindle lock for easy blade changes.

51° bevel capacity with a positive stop at 45° for a wide variety of cuts

Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy and visibility for the 12-inch miter saw blade

XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline once the saw arm is lowered

Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated

AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space

CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring

ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum

Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops

The mitre saw has a precise miter system and machined base fence support

Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically

Brushless motor of the cordless jigsaw delivers efficient performance for longer runtime (vs. DCS331 Jig Saw)

Compact size for easy grip and maximum control of the jig saw

Bright LED on the jigsaw tool helps illuminate dimly lit work surfaces

Portability: Compact size for ease of transportation and storage

Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate

Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets

[LIGHTWEIGHT & STURDY] This flexible and transportable table is tough enough to be a permanent fixture in your workshop, yet light enough to take from job to job. And it folds in half for easy storage and transport

[LEGS STAY SECURE] Metal legs won’t slide out on pavement or sink into soft ground. You’ll have a solid base to work on a project, or even to tailgate

[EASY STORAGE] It collapses in a second, so you can throw it in a corner and get it out of the way until the next time you need it

Legendary worm drive gearing offers maximum torque for ripping applications

Precision rack and pinion system makes fence adjustments quickly and smoothly for accurate cuts

Light weight and compact footprint make it easy to move around the jobsite

MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM

LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability

MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

Brushless motor of DEWALT circular saw allows you to cut up to 369 linear feet of 3/4-inch OSB using DCB205 battery (sold separately)

The cordless circular saw has the removable auxiliary handle for increased control

The compact circular saw has a hang hook for increased convenience

ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment

CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy cleanup.

CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown. Depth Front-to-Back, Not Including Arm: 30 inch

Flexible - power of corded. Freedom of cordless. The world's first battery that automatically changes voltage when you change tools

24" of Rip capacity for ripping 4x8 plywood or osb sheets

Rack and pinion telescoping fence rails make fence adjustments smooth and accurate

VERSATILE APPLICATION – 3/4 in. stroke length for cutting wood, metal, and more materials.

VARIABLE-SPEED MOTOR – 4.5 Amp motor generates up to 3,000 spm of cutting power.

COMPACT AND LIGHTWEIGHT – Electric jig saw is designed for easy maneuverability and reduced vibration.

TOUGH AND PORTABLE – With a powerful 15 Amp motor and lighter, pressed steel base the S355CPSL has all the power you expect but with the portability you need. A chip deflector directs chips away from the operator and reduces cleaning time.

DRY-CUT, COOL TO TOUCH, BURR-FREE CUTS – The included premium tungsten carbide-tipped blade for mild steel cutting represents the latest in dry cut technology, significantly outperforming abrasives. Virtually eliminates sparks! Cuts your metals squarely and smoothly every time providing an instantly workable finish.

MITER SAW 0-45° ANGLE CAPABILITY – Make angle cuts effortlessly. Features a cast steel vise and fence with quick-release mechanism for safe, accurate and fast clamping of the workpiece.

[SMALL FOR A REASON] Quick, more efficient cuts and you can take it with you when you don’t want to lug a big saw around

[EZ-SET DEPTH GAUGE] The lever lets you go from 0-45 degree bevel settings with quick adjustment

[MADE FOR LUMBER] Excellent depth-of-cut for slicing up to 2" stock lumber. Cut 2x4s in a single pass. It also cuts metal, tile, and plastic

Carbide Hole Cutter precisely cuts material up to 3/16 in. thick.

Cuts stainless steel, mild steel, iron, copper and brass sheet.

Spring loaded pilot bit for fast drilling and clean plug ejection.

UP TO 75% MORE POWER: Brushless motor offers long life and increased power for the compact circular saw

SEE CLEARLY: LED of the cordless circular saw illuminates the cutting line and worksurface

MAXIMUM BEVEL: 56 degrees with positive stops at 22.5 and 45

【DURABLE AND POWERFUL MOTOR】: Featured with a 4 Amps copper motor, the compact circular saw can reach a high cutting speed of 4500RPM to cut tile, wood, plastics, plaster board, PVC with ease. Heavy gauge iron wraparound base and aluminum upper cover adds extra durability and safety.

【3 BLADES AND COMPACT】: Comes with 1x30T HW for wood cuts/ 1x36T HS for metal cuts/ 1pcs grit diamond blade for tile cuts, small size and weight also make it a good addition to your toolkit, great for DIY projects around the house and your workshop. (1"for Wood; 3/8"for Tile; 3/16"for Aluminum)

【PRECISE AND ADJUSTABLE CUTTING DEPTH】: With the laser guide, the mini circular saw keeps the cutting on a straight line. Also the parallel guide attachment allows you to make a precise and quick cut with ease. Easy-set depth gauge lever for adjustable cutting depth from 0-25mm(1’’). Laser Level: Class 2.

Efficient and powerful motor: 12 Amps powerful pure copper motor windings, this circular saw can deliver full-size performance at 5,500 rpm to cut through tile, wood, metal panels, plastics and flooring in a single pass with accurate blade

Adjusting depth of cutting and bevel angel: A depth fast and accurate adjustment lever allows for adjustment of the saw's base plate. Maximum cutting depth at 90 degrees is 62mm and at 45 degrees it is 46mm. 0-45° bevel tilt function

Laser and rip fence: An adjustable fence for thinner cuts, with graduated ruler markings on the base and fence. The integrated adjustable laser allows following the line along the length; Circular saw equipped with a hex nut for blade replacement

HIGH QUALITY MACHINE – This product includes the 10-3061 Deluxe Bandsaw and 5/16” x 70-1/2” 6TPI bandsaw blade. Great for producing smooth cuts in wood, metal, and more, this machine is perfect for any craftsman's project. Toggle between two different blade speeds to cut nearly anything.

MOTOR DETAILS - The increased cutting capacity and increased 1/2HP motor make this bandsaw great for small to medium sized projects. Motor: 1/2HP, 5.5Amp, 110V (60Hz), 1720RPM, Blade Speeds: 1515 or 3280 ft/min

TABLE DETAILS - The tilting, 0-45° cast iron table makes for easy operation. Table Size: 13-3/4” x 12-1/2”, Table Tilt: 5 degrees left, 45 degrees right

DURABLE AND LIGHT WEIGHT ELECTRIC MINI CIRCULAR SAW: Rotorazer electric saw is both easy and safe to use, with a thumb-controlled power switch, and a safety switch that keeps the blade guard locked until you're ready to cut. Also comes with a durable construction grade carrying case. High performance motors runs at 4200 RPMS and cuts on an angle, vertically, horizontally and even upside down.

7 DIFFERENT SAWS IN ONE. Rotorazer is combination of a Jigsaw, Circular Saw, Hand Saw, Band Saw, Tile Cutter, Hacksaw, and Miter saw. With Rotorazer portable table saw everyone cuts like a pro! It's designed with a 480-watt motor inside a construction-grade chasse that's durable, incredibly light and fits easily in the palm of any size hand.

QUICK & CLEAN CUTS OF ANY TYPE OF MATERIAL: from PVC, drywall, carpet and hardwood to ceramic tile, plastic, marble, metal & steel and laminate floor. Rotorazer circular saw kit comes with 3 quick-change, razor-sharp cutting blades (diamond, tungsten, and steel) to cut shallow, medium, or deep, thanks to its adjustable blade guard. With the Rotorazer mini circular saw you can completely control the depth of the blade.

A specialist to cut the smallest pieces, whenever working with a regular circular saw is impossible and too dangerous

For perfectly straight cuts in wood, non-ferrous metal, plastics and fiberglass reinforced plastics

The high-performance 110 - 120V motor is very quiet and has a prolonged life expectancy

Powerful 15-amp motor crosscuts boards up to 13.25 inches wide and 4.5 inches thick

Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Bevel or miter up to 45 degrees in either direction (featuring 9 miter stops)

Upgraded New Removable Alloy Steel Base: The handheld bandsaw base weights 6.6kg/14.6 lb and also can be Swiveled angle from 0 - 45°. It is easy to disassemble the base. With this workbench base, you can keep the cutting material does not slide, safe and convenient. Especially for precision cutting work.

The Cutting Capacity: without base :5-by- 4-3/4 In. deep-cut capacity for rectangular stock, 5 In. capacity for round stock , with base: 4-by- 3-1/5 In. deep-cut capacity for rectangular stock, 4 In. capacity for round stock. Variable-speed dial, 100-350 feet per minute, for specific materials and various applications

Superior balance allows for more accurate cuts.Ergonomic soft grip back handle provides comfort during use. Serviceable steel shroud and rubber bumpers allow guards to withstand jobsite abuse. The saw blade guard can be adjusted to protect the saw blade from jamming and safer without hurting your hands.

Powerful Motor. A motor of 5.8 Amps delivers full-size performance at 3,500 RPM to cut multiple materials in a single pass.

Bevel Lever and Depth Guide. The bevel lever allows straight cuts and to change cutting angle up to 45 degrees, while the cutting depth is 1-11/16" (at 90°) and 1-1/8" (at 45°).

Accurate, Clean and Safe. With thickened aluminum base and scale ruler, cut straight and accurate at ease. No worries for the debris if you connect the dust port vacuum adapter. The guards below the blade greatly improve the safety of use.

CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.

SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°

CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.

[SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle

[CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts

[TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal

For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood

Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned

Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals