Best Mastec in 2026

【Specification】:8-1/4 inch 80 Carbide Teeth 5/8 inch arbor

【Application】:Durable smooth cutting and clean cutting.

【TCG Tooth】:Triple Chip Teeth blade ideal for cutting Aluminum,Plexiglass,Plastic,Non-ferrous Metals.

【Application】:Fast smooth clean cutting and widely used in Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws.

【ATB Tooth】:Alternate Top Bevel Teeth blade ideal for cutting all kinds of wood.Such as Hard Wood,Soft Wood,Plywood,Chipboard.

【Anti-Kickback Shoulder】:For safety reasons,preventing inversion of saw blade during cutting.

【Application】:Fast smooth clean cutting and widely used in Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws.

【ATB Tooth】:Alternate Top Bevel Teeth blade ideal for cutting all kinds of wood.Such as Hard Wood,Soft Wood,Plywood,Chipboard.

【Anti-Kickback Shoulder】:For safety reasons,preventing inversion of saw blade during cutting.

【Long Life】:Tougher tungsten carbide tips for up to longer cutting life than other blades.Special surface treatment reduces gumming,rusting and corrosion - Good for decks.

【Good Performance】:Anti-Kickback shoulder designs for safety reasons,preventing inversion of saw blade during cutting. And it has two cutting points to provide the speed of 24 tooth with the finish of 48 tooth.

【Low noise&vibration】:4 expansion slots reduce noise and vibration,keeping the heat dissipation and reducing blade warp.

【Package Include】：3 pack black matte cabinet knobs are about 1-1/10" (28mm) in diameter,1"(25mm) in height.Each cabinet pull comes with 7/8"(22mm) and 1-4/5" (45mm) screws that help you to meet different furniture thickness requirements.

【High Quality】: This round cabinet pulls adopts durable zinc alloy as main material with a flat appearance, equipped with screws are made of selected alloy material, which are rust-proof and durable, reliable for a long time to last.

【Wide Application】:Decorative cabinet knobs are widely used in kitchen cabinets, furniture doors,closets,cupboards,desk drawers, bathroom drawers,bookcases,bedroom dressers,night stands,kitchen cabinets.

[WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two

[CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer

[LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store

[WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two

[CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer

[LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store

FOR LAYING POULTRY: Our crushed oyster shells are crafted to provide essential calcium for all laying poultry including chickens, ducks, and quails; from backyard flock to commercial farms, our product is the perfect addition to your chicken feed

OYSTER SHELL & CORAL CALCIUM: Our chicken oyster shells are made from a blend of crushed oyster shells and coral calcium, ensuring that your poultry receive a high-quality source of chicken calcium that is easily digestible

STRONGER EGGSHELLS: Our crushed oyster shells are an excellent source of calcium for chickens, providing the necessary nutrients for proper eggshell formation, resulting in high-quality eggs and a healthier flock overall

Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops

The mitre saw has a precise miter system and machined base fence support

Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw

Product 1: Protect hands and prevent kickback like never before

Product 1: Powerful high-friction durable grip for extreme hold

Product 1: Precision cutting and control down to 1/4" Ripping

Powerful 15-amp motor delivers 5 300-RPM for greater speed and faster cuts

7-1 4-inch carbide-tipped blade included. Spindle lock for easy blade changes.

51° bevel capacity with a positive stop at 45° for a wide variety of cuts

Committed to bottles made from 100% recovered coastal plastic*

*Recovered Coastal Plastic, in partnership with Plastic Bank, is post-consumer recycled plastic collected on land within 31 miles of an ocean so that it does not reach oceans or landfills.

Windex Ammonia-Free Glass Cleaner leaves an amazing streak-free shine

HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision

CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts

BEVELED CUTS - Makes beveled cuts up to 45 degrees

Protect hands and prevent kickback like never before

Powerful high-friction durable grip for extreme hold

Precision cutting and control down to 1/4" Ripping

Carbide teeth can last up to 60 times longer than standard steel blades

Compatible with 7-1/4" diameter circular saws 5280-01/5180-01/5080-01

Included components: 7-1/4-Inch 40-Tooth Carbide Tipped Saw Blade

13 Amp motor for more power and performance than the SKIL 5380

15% weight reduction vs. SKIL 5380, reduces user fatigue

51-Degree bevel with positive stops for great cut capacity

Included Components: Cooks' Tools;Pasta Tools;Pasta Makers

48 tooth; 2.2mm kerf; 20mm arbor; 5 deg hook angle; ATB

Cross-cut blade for smooth cuts in veneered plywood, sheet goods, melamine, and hard and soft woods

Oversized 20mm arbor enables more secure fastening of the blade to the saw, reducing vibration for more precise cutting

Notice----Do not fit Fein Starlock，Bosch MX30(Bosch MX30EC-31), Bosch Quick Release tools ; Do not fit Fein Supercut

Superior Value Oscillating Saw Blades kit--20 Pcs contain 6 different kinds of saw blades, for cutting wood, metal plastic and other materials, each type of saw blade is specific for a particular purpose. Our oscillating saw blades can meet a variety of needs, which could be used for workshop ,household or other place.

Tougher and Thicker Than Most--Made of alloy steel and high carbon steel , our oscillating multitool blades are manufactured with special techniques and thick gauge metals due to which it becomes durable for a long period.

Woodcutting saw blades are made entirely of Cr-V steel construction for cutting coarse/fuel wood with a 20-175mm thickness, FREE OF NAIL. Pruning saw blade for cutting branches with less than dia.180mm.

Metal saw blades are made of Bi-material for cutting metal with a thickness of 0.7-8mm, pipes/profiles with dia.5-100mm, effortless, fine out.

Compatible with all reciprocating saw brands. The combination set provides a selection of blades for typical applications. Ideal for use with metal, plastic, wood, and drywall.

Thin kerf for fast and smooth cutting action

Computer balanced plate reduces vibration for improved accuracy and better finish

Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy

Specs: Arbor 1", Diameter 12", Grind COMB, Hook Angle 10°, Kerf .091", Plate .071", Teeth 60

Premium TiCo HI-Density Carbide Combination Blend for Maximum Performance

Thin Kerf requires less power and allows for faster feed rate

Miter saw crow stop accurately positions crown molding vertically against the saw fence

Includes 2 stops - one for each side of the blade

Designed to work with DEWALT models DW703, DW706, DW708, DW712, DW715, DW716, DW717 and DW718

Made from high-density tungsten Carbide for toughness, wear-resistance, and long life

Tough coat anti-stick coating reduces friction and gumming

Thin kerf design for smooth cuts

Durable steel construction

Easy setup and break down with excellent stability

Designed for easy loading and unloading into and out of vehicle

10 X 50 COMBINATION

10 X 50 COMBINATION

10 X 50 COMBINATION

TiCo Hi-Density carbide specifically designed for each application to increase performance

Perma-SHIELD Non-stick Coating protects from heat, gumming, & corrosion

Super thin laser cut kerf for fast, durable, and clean cuts

For use with miter or table saws

Carbide construction

Ultra-thin kerf design for easy cuts

7-1/4X60 BULK DIABLO

7-1/4X60 BULK DIABLO

7-1/4X60 BULK DIABLO

DURABILITY: Induction-brazed carbide tips of 10-inch miter saw blade are made for durability and long life

NO MORE WARPING: Heat-treated plate eliminates warping

ACCURATE CUTS: Precision ground teeth for smooth, accurate cuts