Best Jet Table Saws in 2026

Portability: Compact size for ease of transportation and storage

Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate

Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets

INCLUDES: (1) Power Tool Paddle Switch (includes wiring diagram)

FUNCTION: This safety paddle switch provides you with a magnetic emergency stop feature - preventing your tools from powering up after an unexpected outages, blown breakers and other power interruptions

EASY TO USE: Made with a simple and straight forward design featuring a large green recessed ON button safeguarding against accidental starts and a large red OFF paddle switch for a quick shut down

3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide

Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size

Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees

2.8-amp motor rotates the blade up to 2500 feet per minute

Create cuts up to 3-1/2 inches deep and 9 inches wide

Uses 59-1/2-inch blades anywhere from 1/8 to 3/8 inches in size

LARGE WORK PIECE SUPPORT: Deep table with a massive 360 sq. in. of cast iron work surface.

DUST COLLECTION EFFICIENCY: Dual 4” dust ports.

ACCURATE CUTS: Larger, machined aluminum fence surface with easily visible measurements.

PRECISION-GROUND CAST IRON WORK SURFACE: Features a beveled edge for smoother operation.

POLY-V BELT DRIVE SYSTEM: Reduces vibration and maximizes efficiency.

MITER GAUGE PIVOTS 60° LEFT/RIGHT: Allows easy adjustment for a full range of cuts.

Quiet and Efficient Operation: Poly-V drive belt system

Plenty of Table Surface: Left and right, cast iron, 26" x 30" extension wings

Rapid Blade Changes: Push-button arbor lock

HORIZONTAL OR VERTICAL POSTIONS: Large 9" x 12" infeed table assembly extends the support area

REPEATABILITY: Micro-adjustable tool-less material stop for accurate set-up

DURABILITY: Blade wheels are made from flanged cast iron

GREATER VERSATILITY: Adjustable left and right fence and extension tables.

FAST ANGLE ADJUSTMENTS: Change miter angles quickly with the single-motion thumb lever.

EFFICIENT DUST COLLECTION: 2-1/2" adapter connects port to a dust collection bag.

Cutting Accuracy: Arm tilts 45° right and 40° left, keeping the work table flat

Convenient Accessories: Blade storage features slots for pre-loaded blades, and a built-in wrench for changing blades

Precise Speed Control: Variable speed range of 400 to 1,550 strokes per minute

Cutting Accuracy: Arm tilts 45° right and 40° left, keeping the work table flat.

Convenient Accessories: Blade storage features slots for pre-loaded blades, and a built-in wrench for changing blades.

Precise Speed Control: Variable speed range of 400 to 1,550 strokes per minute.

GREATER SUPPORT: Adjustable left and right fence, and extension tables.

SMOOTH SLIDE OPERATION: Enclosed linear bearings.

MAXIMUM CONTROL: Ergonomic, D-shaped, ambidextrous, rubber grip handle.

Newly designed arbor lock to change blades quickly and easily

Quick release riving knife for hassle-free riving knife changes

Improved dust shroud around blade for greater dust collection

Greater Stability: 40-1/2" fence provides better support when ripping.

Massive Work Surface: 80" of solid cast iron.

Improved Dust Collection: Shroud around the blade and integrated hose.

VERSATILE CUTTING: 14 TPI metal and 6 TPI wood cutting blades included.

EXTRA STABILITY: Solid one-piece steel base.

ADJUSTABLE TABLE: Tilts 45° right and 15° left.

protective cover for 6-12 inch table saw and other saws.According to the size of your saw or the diameter of the exposed saw to choose the right, dividing knife can be adjusted up and down the height.

The saw blade dust cover prevents wood chips from flying around when cutting wood, Collect of above-table dust

Table saw blade guard With Dispensing Knife: With dispensing tool which is helpful for woodworking.

Compact Benchtop Design: Easy transportation to different shop locations.

Ideal Starter Saw: Easily handles smaller cut application work and is suitable for scroll sawing (accommodates 1/8"-1/2" blades).

Increased Rigidity: Upper and lower cast iron frame.

Motor: 1/3 HP, 120V, single-phase, 2.8A

Max. cutting width left of blade: 9"

Max. cutting height (resaw capacity): 3-5/8"

Impeccable Cutting Proficiency: Are you ready to cut into an unbelievable experience? The woodworking bandsaw can cut wood with a maximum cutting height of 6 inches. Max. Throat Width: 9.65 in / 245 mm, Sawblade Length: 72.13 in / 1832 mm, Max.Sawblade Speed: 890 m/min±10%.

Two-speed Adjustable: The benchtop band saw comes with a high-performance motor that can deliver a powerful 1/2 HP 370W output while providing overheat protection for added security. The benchtop band saw features an 1100 RPM maximum speed and 560 RPM minimum speed, accommodating their specific needs.

Multi-angle Cutting: The wood bandsaw features a tilting table that can be adjusted from 0 to 45°, allowing for more flexibility when cutting. The sawtable size is 13.39 x 13.19 in, made of Q235 steel for added strength and durability. By tilting the table 45 degrees to the right, you can easily cut bevels with precision and ease.

Precise Cuts: Fully-adjustable ball bearing blade guides.

No More Belt Changes: Simply adjust the blade speed with the turn of a dial.

Variety of Cuts: Versatile, heavy-duty casted head swivels for a maximum cut at 45° and 60°.

Quick-positioning vise swivels to 45°, reducing set up time; built-in, self propelled blade brush extends blade life

Heavy-Duty geared head transmission for quick speed changes; vertical work table

Heavy-Duty cast iron saw Bow and head; coolant system

16" RESAW CAPACITY: For cutting large pieces of wood, slicing veneers, and cutting book matched panels.

27-1/4" x 20" CAST IRON TABLE: Added stability and work support.

FOUR-SIDED GUIDE POST WITH RACK AND PINION ADJUSTMENT: Optimum blade support.

【Fitment】7-inch band saw resaw guide for large workpieces band saw, for Jet, General, Grizzly, and many others most 14" band saws with KMS7200 bandsaw fence. A bolt-on bandsaw fence accessory that is easily attached to your precision bandsaw fence.

【Specific usage】A reliable replacement for Kreg KMS7214 resaw guide, which is a specific bolt-on bandsaw fence accessory that adjusts precise blade drift and perpendicularity. Package included hardware: Knurled nuts and hex-head bolts.

【Curved Face Guide】 Quality resaw guide with a curved surface of resaw guide allows you to steer the board left or right. With the workpiece against the resaw guide, slowly feed it into the blade. Help beginners get a precise band saw cutting which can maintain their desired thickness.

VERSATILE CUTTING: 14 TPI metal and 6 TPI wood cutting blades included.

EXTRA STABILITY: Solid one-piece steel base.

ADJUSTABLE TABLE: Tilts 45° right and 15° left.

High-Efficiency Cutting: Two-speed transmission (65-555 and 390-3,280 SFPM) allows for proper adjustments.

Blade Repair Station: Built-in blade welder, grinder, and cutter.

Heavy-Duty Construction: Completely enclosed steel frame.

STRENGTH AND RIGIDITY: Heavy-duty completely-enclosed steel frame.

CUTTING AT ANY ANGLE: Precisely-ground, articulating table with 10° left and 45° right movement.

PREVENTS BREAKAGE: Handwheel with blade tensioning gauge acurately measures blade pressure.

Smooth Cuts: Hydraulic downfeed control is easily adjusted, enabling feed rates to evolve with variable types of materials.

Automatic Shutoff: Feature switches off the blade just after cut completion.

Self-Propelled Blade Brush: Prevents chip build up in the blade guides.